Regulation (EU) No 1308/2013 of the European Parliament and of the CouncilDangos y teitl llawn

B. Standard qualities for sugar U.K.

I. Standard quality for sugar beet U.K.

Standard quality beet shall:

(a)

be of sound, fair and marketable quality;

(b)

have a sugar content of 16 % at the reception point.

II. Standard quality for white sugar U.K.

1. White sugar of the standard quality shall have the following characteristics: U.K.

(a)

sound, fair and marketable quality; dry, in homogeneous granulated crystals, free-flowing;

(b)

minimum polarisation: 99,7;

(c)

maximum moisture content: 0,06 %;

(d)

maximum invert sugar content: 0,04 %;

(e)

the number of points determined under point 2 not exceeding a total of 22, nor:

• 15 for the ash content,

• 9 for the colour type, determined using the method of the Brunswick Institute of Agricultural Technology ("the Brunswick method"),

• 6 for the colouring of the solution, determined using the method of the International Commission for Uniform Methods of Sugar Analysis ("the ICUMSA method").

2. One point shall correspond to: U.K.

(a)

0,0018 % of ash content determined using the ICUMSA method at 28^o Brix;

(b)

0,5 units of colour type determined using the Brunswick method;

(c)

7,5 units of colouring of the solution determined using the ICUMSA method.

3. The methods for determining the factors referred to in point 1 shall be those used for determining those factors under the intervention measures. U.K.

III. Standard quality for raw sugar U.K.

1. Raw sugar of the standard quality shall be sugar with a yield in white sugar of 92 %. U.K.

2. The yield of raw beet sugar shall be calculated by subtracting from the degree of polarisation of that sugar: U.K.

(a)

its percentage ash content multiplied by four;

(b)

its percentage invert sugar content multiplied by two;

(c)

the number 1.

3. The yield of raw cane sugar shall be calculated by subtracting 100 from the degree of polarisation of that sugar multiplied by two. U.K.