- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Implementing Regulation (EU) No 503/2013 of 3 April 2013 on applications for authorisation of genetically modified food and feed in accordance with Regulation (EC) No 1829/2003 of the European Parliament and of the Council and amending Commission Regulations (EC) No 641/2004 and (EC) No 1981/2006 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
There are outstanding changes not yet made to Commission Implementing Regulation (EU) No 503/2013. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
The certified reference material shall be produced under ISO Guide 34 (General requirements for the competence of reference material producers) by a producer accredited to ISO Guide 34.
The applicant shall provide information as regards the place where the certified reference material can be accessed. This shall be accompanied by adequate information demonstrating that the availability of the certified reference material will be maintained throughout the period of validity of the authorisation. For verification and value assignment, a method that has been properly validated (see ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories) shall be used.
Uncertainties shall be estimated according to the ISO Guide to the Expression of Uncertainty in Measurement (GUM).
The main characteristics of those internationally accepted technical provisions are the following:
Genetically modified reference material containers:
genetically modified reference material container (such as bottles, vials, ampoules) shall be tight and contain not less than the stated amount of material;
the commutability of the genetically modified reference material must be assured;
packaging shall be appropriate to the purpose;
labelling shall be of good aspect and quality.
Homogeneity testing:
samples shall have appropriate homogeneity;
between-bottle homogeneity shall be examined;
any possible between-bottle heterogeneity shall be accounted for in the overall estimated reference material uncertainty. This requirement shall apply even when no statistically significant between-bottle variation is present. In this case, the method variation or the actual calculated between-bottle variation, whichever is larger, shall be included in the overall uncertainty.
Stability testing:
samples shall have appropriate stability;
stability shall be positively demonstrated by appropriate statistical extrapolation for the genetically modified reference material shelf-life to be within the stated uncertainty; the uncertainty related to this demonstration is part of the estimated reference material uncertainty. Assigned values are valid only for a limited time and shall be subject to a stability monitoring.
Batch characterisation:
The methods used for verification and for certification shall:
be applied under metrologically valid conditions;
have been properly technically validated before use;
have precision and trueness compatible with the target uncertainty.
Each set of measurements shall:
be traceable to the stated references;
be accompanied by an uncertainty statement whenever possible.
Participating laboratories shall:
have the required competence for the execution of the task;
be able to achieve traceability to the required stated references;
be able to estimate their measurement uncertainty;
have in place a sufficient and appropriate quality assurance system.
Final storage:
To avoid degradation after sample production, all samples shall be stored under conditions designated for the final storage of the genetically modified certified reference material before measurements are started.
Otherwise, they shall be transported from door to door keeping them at all times under such storage conditions for which it has been demonstrated that there is no influence on the assigned values.
Establishment of a certificate for certified reference material:
A certificate complemented by a certification report shall be established, containing all information relevant to and needed by the user.
The certificate and report shall be made available when the genetically modified certified reference material is distributed.
The information accompanying the certified reference material shall include information on the breeding of the plant which has been used for the production of the certified reference material and on the zygosity of the insert(s).
The certified value of the GMO content shall be given in mass fraction and, where available, in copy number per haploid genome equivalent.
Certified values (such as quantity of genetically modified material expressed in mass fraction) shall be traceable to stated references and be accompanied by an expanded uncertainty statement valid for the entire shelf-life of the genetically modified certified reference material.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys