Commission Implementing Regulation (EU) No 1191/2014Dangos y teitl llawn

Commission Implementing Regulation (EU) No 1191/2014 of 30 October 2014 determining the format and means for submitting the report referred to in Article 19 of Regulation (EU) No 517/2014 of the European Parliament and of the Council on fluorinated greenhouse gases

ANNEXU.K.GENERAL EXPLANATIONS

Unless otherwise stated in the reporting sections of this Annex, the reported data shall cover the activities of the undertaking during the calendar year for which the report is submitted.

The units of measurement, the gases covered, the level of detail and an indication of the year in which activities are to be reported for the first time are specified separately in each reporting section.

The general format of the reporting tool is set out in the following reporting sections. The numbering of the sections presented below has no relevance with the numbering of Regulation (EU) No 517/2014 or the electronic reporting tool, but is used in the formulas for the automatic calculation of certain values.

Reporting sectionsU.K.

Section 1:U.K.To be filled in by producers of gases — Article 19(1) and (2) of Regulation (EU) No 517/2014 and point 1(a) and (c) of Annex vii to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II of Regulation (EU) No 517/2014. Quantities of mixtures containing those substances placed on the market shall be reported, also indicating the amounts used as components of these mixtures from other sources than own production.

[F1INFORMATION TO BE REPORTED COMMENTS
1A Total quantity of production from facilities in [F2Great Britain]
1Aa
thereof: Amounts not captured
1A_a
thereof: Amounts destroyed

If the in-line destruction is carried out by another undertaking, the latter should be specified

Reports from producers which carry out destruction on the total quantities destroyed shall be made in reporting Section 8

AUTOMATICALLY CALCULATED QUANTITIES
1Ab
thereof: Total amount generated and captured
1Ab = 1A - 1Aa
INFORMATION TO BE REPORTED
1B
thereof: Quantity of production from facilities in [F2Great Britain] consisting of recovered by-production or unwanted products where that by-production or those products have been destroyed in the facilities prior to the placing on the market
Reports from producers which carry out destruction on the total quantities destroyed shall be made in reporting Section 8
1C
thereof: Quantity of production from facilities in [F2Great Britain] consisting of recovered by-production or unwanted products where that by-production or those products have been handed over to other undertakings for destruction and had not been placed on the market previously
The undertaking carrying out the destruction shall be identified
1C_a
thereof: Amounts of hydrofluorocarbons produced for feedstock uses within [F2Great Britain]
The [F3part of Great Britain] where feedstock use will take place shall be indicated
1C_a1
thereof: Without prior capture
Only to be reported for HFC-23
AUTOMATICALLY CALCULATED QUANTITIES
1C_a2
thereof: After prior capture

1C_a2 = 1C_a – 1C_a1;

To be calculated only for HFC-23

INFORMATION TO BE REPORTED
1C_b
thereof: Amount of hydrofluorocarbons produced for uses within [F2Great Britain] exempted under the Montreal Protocol
The type of exempted use shall be specified
AUTOMATICALLY CALCULATED QUANTITIES
1D
thereof: Total quantity of own production captured and destroyed which has not been placed on the market previously
1D = 1B + 1C
1E Production available for sale or feedstock use 1E = 1A – 1D – 1A_a]

Section 2:U.K.To be filled in by importers of gases — Article 19(1) of Regulation (EU) No 517/2014 and point 2(a) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014, for mixtures containing at least one of those gases or for each gas or mixture contained in imported pre-blended polyols. [F4For the first time for the reporting on activities in 2019, quantities of hydrofluorocarbons shall be reported separately for each country of origin, except where indicated otherwise in the table below.]

Only bulk imports shall be reported here, including quantities shipped alongside equipment for the purpose of charging that equipment after import, but not quantities contained in equipment. Imports of gases contained in products or equipment shall be reported in reporting section 11. [F5All imports shall be reported, except imports for transit through the territory of Great Britain or imports under other procedures that allow for a temporary movement of the goods on the territory of Great Britain provided that in the latter case the goods remain no longer than 45 days on the territory of Great Britain.]

[F6INFORMATION TO BE REPORTED COMMENTS
2A Amount imported into [F2Great Britain]
2B Amount imported into [F2Great Britain] by the reporting undertaking, not released for free circulation, and re-exported contained in products or equipment by the reporting undertaking

Reporting of hydrofluorocarbons by country of origin is not necessary.

Bulk gases imported for inward processing, charged into products or equipment and subsequently re-exported.

Where the re-export in products or equipment (Section 2B) does not take place in the same calendar year as the import, the quantities reported in Section 2B may include re-exports in products or equipment of 1 January stocks not placed on [F2Great Britain] market as reported in Section 4C

Bulk gas exports shall only be reported in Section 3

2C Amount of used, recycled or reclaimed hydrofluorocarbons
2D Amount of virgin hydrofluorocarbons imported for feedstock use
2E Amount of virgin hydrofluorocarbons imported for uses exempted under the Montreal Protocol The type of exempted use shall be specified
[F7 2F Amount of hydrofluorocarbons contained in pre-blended polyols ]]

Section 3:U.K.To be filled in by exporters of gases — Article 19(1) and (2) of Regulation (EU) No 517/2014 and point 3(a) and (b) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014, for mixtures containing at least one of those gases or for each gas or mixture contained in exported pre-blended polyols. [F4For the first time for the reporting on activities in 2019, quantities of hydrofluorocarbons shall be reported separately for each country of destination, except where indicated otherwise in the table below.]

Only exports of bulk gases, including any quantities shipped alongside equipment for the purpose of charging that equipment after export, shall be reported under this Section.

Quantities from own production or own import supplied to other undertakings in [F2Great Britain] for direct export shall be reported in reporting Section 5.

[F6INFORMATION TO BE REPORTED COMMENTS
3A Total amount exported from [F2Great Britain]
3B Exported amounts from own production or import Reporting by country of destination is not necessary
AUTOMATICALLY CALCULATED QUANTITIES
3C Exported amount purchased from other undertakings within [F2Great Britain] 3C = 3A – 3B
INFORMATION TO BE REPORTED
3D Amount exported for recycling Reporting by country of destination is not necessary
3E Amount exported for reclamation Reporting by country of destination is not necessary
3F Amount exported for destruction Reporting by country of destination is not necessary
3G Amount of used, recycled or reclaimed hydrofluorocarbons exported
3H Amount of virgin hydrofluorocarbons exported for feedstock use
3I Amount of virgin hydrofluorocarbons exported for uses exempted under the Montreal Protocol The type of exempted use shall be specified
[F7 3J Amount of hydrofluorocarbons contained in pre-blended polyols ]]

Section 4:U.K.To be filled in by producers and importers of gases — Article 19(1) of Regulation (EU) No 517/2014 and points 1(d), 2(b) and 2(d) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or for mixtures containing at least one of those gases or for each gas or mixture contained in pre-blended polyols.

INFORMATION TO BE REPORTEDCOMMENTS
4ATotal 1st January stocks
4B
thereof: 1 January stocks of quantities from own import or production
4C
thereof: 1 January stocks of quantities from own import or production, previously not placed on the market
In particular unsold own production and own imports not released for free circulation
AUTOMATICALLY CALCULATED QUANTITIES
4D
thereof: 1 January stocks of quantities from own import or production, previously placed on the market

In particular own imports released for free circulation

4D = 4B – 4C

4EOther 1 January stocks

In particular from purchases within [F2Great Britain]

4E = 4A – 4B

INFORMATION TO BE REPORTED
4FTotal 31st December stocks
4G
thereof: 31 December stocks of quantities from own import or production
4H
thereof: 31 December stocks of quantities from own import or production, previously not placed on the market
In particular unsold own production, own imports not released for free circulation
AUTOMATICALLY CALCULATED QUANTITIES
4I
thereof: 31 December stocks of quantities from own import or production, previously placed on the market

In particular own import released for free circulation

4I = 4G – 4H

4J
thereof: Other 31 December stocks

In particular from purchases within [F2Great Britain]

4J = 4F-4G

INFORMATION TO BE REPORTED
4KAmount reclaimed by the undertaking itself
4LAmount recycled by the undertaking itself
AUTOMATICALLY CALCULATED QUANTITIES
[F64M Total amount physically placed on the market 4M = 1E + 2A – 2B – 3B + 4C – 4H]

Section 5:U.K.Quantities for uses exempted under Article 15(2), to be filled in by producers and importers of hydrofluorocarbons — Article 19(1), (2) (3) and (4) of Regulation (EU) No 517/2014 and points 1(b) and 2(a) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each hydrofluorocarbon (for gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014, for mixtures or pre-blended polyols containing at least one of those gases).

INFORMATION TO BE REPORTEDCOMMENTS
5AQuantity imported into [F2Great Britain] for destruction

The undertaking/s carrying out the destruction shall be specified.

Reports from importers which also carry out destruction themselves on the quantities destroyed shall be made in reporting Section 8.

5BQuantity used by a producer or importer in feedstock applications or supplied directly by a producer or an importer to undertakings for use in feedstock applications

The feedstock using undertaking/s shall be specified

Reports from producers or importers which are also feedstock users themselves on their feedstock use shall be made in reporting section 7.

5C

Quantity supplied directly to undertakings for export out of [F2Great Britain], where those quantities were not subsequently made available to another party within [F2Great Britain] prior to export

On a voluntary basis, quantities supplied directly to undertakings for manufacturing of equipment in [F2Great Britain], where such equipment is subsequently directly exported out of [F2Great Britain]

The exporting undertaking/s shall be specified. Verification documents should be provided.

Only hydrofluorocarbons in bulk shall be reported, not quantities contained in products or equipment.

Data on supply for the manufacturing of equipment that is directly exported may be provided for information purposes, and should specify the exporting equipment manufacturer and quantities that were exported.

5DQuantity supplied directly for use in military equipmentThe undertaking receiving the quantity for use in military equipment shall be specified.
5EQuantity supplied directly to an undertaking using it for the etching of semiconductor material or the cleaning of chemicals vapour deposition chambers within the semiconductor manufacturing sectorThe receiving semiconductor manufacturer shall be specified.
5FQuantity supplied directly to an undertaking producing metered dose inhalers for the delivery of pharmaceutical ingredientsThe receiving producer of metered dose inhalers for the delivery of pharmaceutical ingredients shall be specified.

Section 6:U.K.Categories of application of gases for the [F8market], to be filled in by producers and importers of gases — Article 19(1) and (2) of Regulation (EU) No 517/2014 and points 1(a), and 2(a) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixture containing at least one of those gases.

INFORMATION TO BE REPORTEDCOMMENTS
6AExportFor hydrofluorocarbons, the amount reported here [6A] shall be the same amount or higher as that reported in reporting section 5 as supplied directly to undertakings for export out of [F2Great Britain], where those quantities were not subsequently made available to any other party within [F2Great Britain], prior to export [5C].
6BDestructionFor hydrofluorocarbons, the amount reported here [6B] shall be the same amount or higher as that reported in reporting section 5 as imported into [F2Great Britain] for destruction [5A].
6CMilitary equipmentFor hydrofluorocarbons, the amount reported here [6C] shall be the same amount or higher as that reported in reporting section 5 as supplied directly for use in military equipment [5D].
6DRefrigeration, air-conditioning and heating
6EOther heat transfer fluids
6FProduction of foams
6GProduction of pre-blended polyols
6HFire protection
6IAerosols — medical dose inhalersFor hydrofluorocarbons, the amount reported here [6I] shall be the same amount or higher as that reported in reporting section 5 as supplied directly to an undertaking producing metered dose inhalers for the delivery of pharmaceutical ingredients [5F].
6JAerosols — other uses
6KSolvents
6LFeedstockFor hydrofluorocarbons, the amount reported here [6L] shall be the same amount or higher as that reported in reporting section 5 as used by a producer in feedstock applications or supplied directly by a producer or an importer to undertakings for use in feedstock applications [5B].
6MSemiconductor manufactureFor hydrofluorocarbons, the amount reported here [6M] shall be the same amount or higher as that reported in reporting section 5 as supplied directly to an undertaking using it for the etching of semiconductor material or the cleaning of chemicals vapour deposition chambers within the semiconductor manufacturing sector [5E].
6NPhotovoltaics manufacture
6OOther electronics manufacture
6PElectrical switchgear equipment
6QParticle accelerators
6RMagnesium die casting operations
6SAnaesthetics
6TOther or unknown applicationOther application/s shall be specified, and unknown application shall be explained by the reporter.
6ULeakage during storage, transport or transfer
6VAccountancy adjustmentsWhere such quantities are reported, an explanation should be provided
AUTOMATICALLY GENERATED CALCULATIONS OF QUANTITIES
6WTotal quantities for the categories for applications

6W = 6A + 6B + 6C + 6D + 6E + 6F + 6G + 6H + 6I + 6J + 6K + 6L + 6M + 6N + 6O + 6P + 6Q + 6R + 6S + 6T + 6U + 6V

If data are reported correctly, then the total quantities for the categories of applications [6W] will correspond to the calculated total quantity supplied to [F2Great Britain] market [6X].

6XTotal quantity supplied to [F2Great Britain] market6X = 1E + 2A – 3B + 4B – 4G + 4K

Section 7:U.K.To be filled in by feedstock users of gases — Article 19(3) of Regulation (EU) No 517/2014 and point 5 of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixture containing at least one of those gases.

Only quantities actually used as feedstock shall be reported here.

Where hydrofluorocarbons (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases) were produced or imported by the undertaking using them as the feedstock, the quantities used shall be reported in section 5 as well. Where the undertaking produced or imported those gases and subsequently sold them for use as feedstock to other undertakings, the quantities supplied shall only be reported in reporting section 5, specifying the feedstock using undertaking.

INFORMATION TO BE REPORTEDCOMMENTS
7AAmount used as feedstock by the undertaking itself

Section 8:U.K.To be filled in by undertakings having destroyed gases — Article 19(2) of Regulation (EU) No 517/2014 and point 4 of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each fluorinated greenhouse gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixture containing at least one of those gases.

The total quantities destroyed by the reporting undertaking themselves are to be reported. Undertakings which are producers shall also report on the quantities of its own production which have been destroyed, in reporting section 1.

Undertakings which are importers of hydrofluorocarbons (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases) shall report the quantities of its imports which have been destroyed, in reporting section 5.

Quantities sent for destruction to other undertakings in [F9Great Britain] shall not be reported here. Quantities exported for destruction outside [F9Great Britain] shall be reported in 3F.

INFORMATION TO BE REPORTEDCOMMENTS
8AAmount destroyed by the reporting company using high temperature combustion
8BAmount destroyed by the reporting company using thermal desorption
8CAmount destroyed by the reporting company using other technologiesThe employed destruction technologies shall be specified
AUTOMATICALLY CALCULATED QUANTITIES
8DTotal amount destroyed by the undertaking itself8D = 8A + 8B + 8C
INFORMATION TO BE REPORTED
8E1 January stocks waiting to be destroyed
8F31 December stocks intended for destruction waiting to be destroyed

Section 9:U.K.To be filled in by producers or importers having authorised the use of a hydrofluorocarbon quota to undertakings placing on the market refrigeration, air conditioning and heat pump equipment charged with hydrofluorocarbons — Article 19(1) of Regulation (EU) No 517/2014 and points 1(e) and 2(c) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities in 2015 (by 31 March 2016 at the latest).

Quantities shall be reported in tonnes of CO2 equivalents with accuracy to 1 tonne of CO2 equivalent, without distinction between different hydrofluorocarbons.

Only authorisations issued during the calendar year for which the report is submitted shall be reported.

INFORMATION TO BE REPORTEDCOMMENTS
9AQuantities subject to authorisations to use a quota given to producers or importers of pre-charged equipment under Article 18(2) of Regulation (EU) No 517/2014The undertaking receiving the authorisation shall be specified.

Section 10:U.K.To be filled in by undertakings which have received their quota exclusively on the basis of a declaration pursuant to Article 16(2) of Regulation (EU) No 517/2014 and which have authorised the use of a hydrofluorocarbon quota to undertakings placing on the market refrigeration, air conditioning and heat pump equipment charged with hydrofluorocarbons pursuant to second subparagraph of Article 18(2) of Regulation (EU) No 517/2014 — Article 19(1) of Regulation (EU) No 517/2014 and points 1(e) and 2(c) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities in 2015 (by 31 March 2016 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each hydrofluorocarbon (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases).

All hydrofluorocarbon supplies linked to the authorisations issued during the calendar year for which the report is submitted, as reported under section 9, shall be reported in this reporting section. This information is needed to verify compliance with Article 18(2) of Regulation (EU) No 517/2014.

INFORMATION TO BE REPORTEDCOMMENTS
10AAmount of gas supplied to undertakings, to which authorisations were issued for the placing on the market refrigeration, air conditioning and heat pump equipment charged with hydrofluorocarbons.

The receiving undertaking/s shall be specified.

With the report, undertakings should submit additional proof for all physical supplies reported here (e.g. invoices).

Section 11:U.K.To be filled in by undertakings having placed on the market gases contained in products or equipment pursuant to Article 19(4) of Regulation 517/2014 — Article 19(4) of Regulation (EU) No 517/2014 and point 6 of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities of fluorinated greenhouse gases listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixtures containing at least one of those gases contained in the products and equipment shall be reported in metric tonnes with accuracy to the third decimal place, by category. In addition to the total quantity of gases, the number of units shall be reported per category, unless otherwise stated.

Producers of products or equipment manufactured in [F2Great Britain] shall not report on products and equipment where the contained gases were previously imported into or produced in [F2Great Britain]. Where a producer itself produces bulk gas in [F2Great Britain] for use in [F2Great Britain] for manufacturing their products and equipment, its reporting on production (reporting section 1) would similarly cover the relevant gas amounts, so these amounts shall also not be reported in this section.

Importers of products or equipment containing a fluorinated greenhouse gas listed in Annex I or II to Regulation (EU) No 517/2014 shall report on all gas containing imports released by customs for free circulation in [F2Great Britain]. Imports of pre-blended polyols are not to be reported in this section but in section 2. Where hydrofluorocarbons (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases) contained in imported refrigeration, air conditioning or heat pump equipment had previously been exported from [F2Great Britain], and had been subject to the hydrofluorocarbon quota limitation for placing on the market, that shall be reported in reporting section 12 in order to prove compliance with Article 14 of Regulation (EU) No 517/2014.

The categories of products or equipment listed below include components intended for the specified product or equipment categories.

The term ‘direct design’ refers in particular to air-to-air, water-to-air, brine-to-air systems; the term ‘indirect design’ in particular to air-to-water, water-to-water, brine-to-water systems, including hydronic heat-pumps.

AUTOMATICALLY CALCULATED QUANTITIESCOMMENTS
11AStationary equipment for comfort cooling or heating11A = 11A1 + 11A2 + 11A3 + 11A4 + 11A5 + 11A6 + 11A7 + 11A8 + 11A9 + 11A10 + 11A11 + 11A12 + 11A13 + 11A14
INFORMATION TO BE REPORTED
11A1Stationary equipment for comfort cooling/heating, direct design: Standalone/monobloc units of moveable type
11A2Stationary equipment for comfort cooling/heating, direct design: standalone/monobloc units of rooftop type
11A3Stationary equipment for comfort cooling/heating, direct design: standalone/monobloc units of other typeThe equipment type/s shall be specified.
11A4Stationary equipment for comfort cooling/heating, direct design: single split units charged with 3 kilograms or more of refrigerant
11A5Stationary equipment for comfort cooling/heating, direct design: single split units charged with less than 3 kilograms of refrigerant
11A6Stationary equipment for comfort cooling/heating, direct design: multi split units
11A7Stationary equipment for comfort cooling/heating, indirect design: standalone/monobloc units for domestic use
11A8Stationary equipment for comfort cooling/heating, indirect design: standalone/monobloc units for commercial or industrial use
11A9Stationary equipment for comfort cooling/heating, indirect design: standalone/monobloc units for other useThe intended use/s shall be specified.
11A10Stationary equipment for comfort cooling/heating, indirect design: split units for domestic use
11A11Stationary equipment for comfort cooling/heating, indirect design: split units for commercial or industrial use
11A12Stationary equipment for comfort cooling/heating, indirect design: split units for other useThe intended use/s shall be specified.
11A13Stationary equipment for comfort cooling/heating, both direct and indirect: standalone/monobloc units
11A14Stationary equipment for comfort cooling/heating, both direct and indirect: split units
AUTOMATICALLY CALCULATED QUANTITIES
11BStationary equipment for refrigeration11B = 11B1 + 11B2 + 11B3 + 11B4 + 11B5 + 11B6 + 11B7 + 11B8 + 11B9 + 11B10 + 11B11 + 11B12 + 11B13 + 11B14
INFORMATION TO BE REPORTED
11B1Stationary equipment for refrigeration, direct design: standalone/monobloc units for domestic use
11B2Stationary equipment for refrigeration, direct design: standalone/monobloc units for commercial or industrial use
11B3Stationary equipment for refrigeration, direct design: standalone/monobloc units for other useThe intended use/s shall be specified.
11B4Stationary equipment for refrigeration, direct design: split units for commercial or industrial use
11B5Stationary equipment for refrigeration, direct design: split units for other useThe intended use/s shall be specified.
11B6Stationary equipment for refrigeration, indirect design: standalone/monobloc units for commercial or industrial use
11B7Stationary equipment for refrigeration, indirect design: standalone/monobloc units for other useThe intended use/s shall be specified.
11B8Stationary equipment for refrigeration, indirect design: split units for commercial or industrial use
11B9Stationary equipment for refrigeration in indirect design: split units for other useThe intended use/s shall be specified.
11B10Stationary equipment for refrigeration, both direct and indirect: standalone/monobloc units
11B11Stationary equipment for refrigeration, both direct and indirect: split units
11B12Stationary equipment for process cooling or heating in direct design
11B13Stationary equipment for process cooling or heating in indirect design
11B14Stationary equipment for process cooling or heating, both direct and indirect
11CHeat pump tumble dryers
AUTOMATICALLY CALCULATED QUANTITIES
11DStationary heating/air conditioning including heatpumps as well as refrigeration (HACR) equipment for any other purposes11D = 11D1 + 11D2 + 11D3
INFORMATION TO BE REPORTED
11D1Stationary HACR equipment for any other purposes, direct designThe equipment type/s and purpose/s shall be specified.
11D2Stationary HACR equipment for any other purposes, indirect designThe equipment type/s and purpose/s shall be specified.
11D3Stationary HACR equipment for any other purposes, both direct and indirectThe equipment type/s and purpose/s shall be specified.
AUTOMATICALLY CALCULATED QUANTITIES
11EMobile refrigeration equipment11E = 11E1 + 11E2 + 11E3 + 11E4
INFORMATION TO BE REPORTED
11E1Mobile refrigeration equipment for refrigerated light duty vehicles (e.g. vans)
11E2Mobile refrigeration equipment for refrigerated heavy duty vehicles (including trucks and trailers)
11E3Mobile refrigeration equipment for refrigerated ships
11E4Any other mobile refrigeration equipmentThe equipment type/s shall be specified.
AUTOMATICALLY CALCULATED QUANTITIES
11FMobile air conditioning equipment11F = 11F1 + 11F2 + 11F3 + 11F4 + 11F5 + 11F6 + 11F7 + 11F8 + 11F9
INFORMATION TO BE REPORTED
11F1Mobile air conditioning equipment for passenger cars
11F2Mobile air conditioning equipment for buses
11F3Mobile air conditioning equipment for vans (light duty vehicles)
11F4Mobile air conditioning equipment for trucks and trailers (heavy duty vehicles)
11F5Mobile air conditioning equipment for agricultural, forestry and construction vehicles and machinery
11F6Mobile air conditioning equipment for rail vehicles
11F7Mobile air conditioning equipment for ships
11F8Mobile air conditioning equipment for aircrafts and helicopters
11F9Any other mobile air conditioning equipmentThe equipment type/s shall be specified.
AUTOMATICALLY CALCULATED VALUE
11GTotal refrigeration, air conditioning or heat pump equipment11G = 11A + 11B + 11C + 11D + 11E + 11F
11HFoam products11H = 11H1 + 11H2 + 11H3 + 11H4
INFORMATION TO BE REPORTED
11H1Extruded polystyrene (XPS) insulation boardsQuantities of XPS boards shall be reported in units of cubic metres (next to quantities of contained fluorinated gases in units of metric tonnes)
11H2Polyurethane (PU) insulation boardsQuantities of PU boards shall be reported in units of cubic metres (next to quantities of contained fluorinated gases in units of metric tonnes)
11H3One component foam (OCF)The measurement unit can be pieces of OCF cans (next to quantities of contained fluorinated gases in units of metric tonnes)
11H4Other foam products

The product category/ies shall be specified.

Imports of pre-blended polyols (e.g. in foam systems/containers) shall not be reported here but rather in section 2.

Quantities of foam products shall be reported in units of either cubic metres, metric tonnes, or pieces of product/equipment (next to quantities of contained fluorinated gases in units of metric tonnes)

11IFire protection equipment (including systems incorporated in vehicles)
11JMedical or pharmaceutical aerosols
11KNon-medical aerosols
11LMedical equipment (without aerosols)
11MSwitch gear for transmission and distribution of electricity
11NOther electrical transmission and distribution equipment
11OParticle accelerators
11POther products and equipment containing gases listed in Annex I or Annex II of Regulation (EU) No 517/2014

The product or equipment category/ies shall be specified.

The measurement unit can be either volume, weight or pieces of product/equipment.

(next to quantities of contained fluorinated gases in units of metric tonnes)

AUTOMATICALLY CALCULATED QUANTITIES
11QTotal of products and equipment containing fluorinates gases listed in Annex I or Annex II of Regulation (EU) No 517/201411Q = 11G + 11H + 11I + 11J + 11K + 11L + 11M + 11N + 11O + 11P

Section 12:U.K.To be filled in by importers of refrigeration, air conditioning or heat pump equipment charged with hydrofluorocarbons, where the hydrofluorocarbons contained in the imported equipment had previously been exported from [F2Great Britain] and acquired by manufacturers of equipment directly from the exporting undertaking, and had been subject to the hydrofluorocarbon quota limitation for placing on [F2Great Britain] market — Article 19(5) of Regulation (EU) No 517/2014 and point 6 of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2017 (by 31 March 2018 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each hydrofluorocarbon (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases).

[F6INFORMATION TO BE REPORTED COMMENTS
12A Amount of hydrofluorocarbons charged into the imported equipment, released by customs for free circulation in [F2Great Britain], for which the hydrofluorocarbons had previously been exported from [F2Great Britain] and which had been subject to the hydrofluorocarbon quota limitation for placing on [F2Great Britain] market

The hydrofluorocarbon exporting undertaking/s and the year/s of export shall be specified.

The undertaking/s having placed the hydrofluorocarbons on [F2Great Britain] market for the first time and the year/s of that placing on the market shall be specified.]

F10Section 13:U.K.To be filled in by importers of refrigeration, air conditioning or heat pump equipment charged with hydrofluorocarbons, where the hydrofluorocarbons contained in the equipment are accounted for in the quota system through the use of authorisations — Article 19(5) of Regulation (EU) No 517/2014 and point 6 of Annex VII to Regulation (EU) No 517/2014

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

[F11Section 13a:U.K. To be filled in by producers and importers of gases – Article 19(1) of Regulation (EU) No 517/2014 and points 1(a) to 1(d); points 2(a), 2(b) and 2(d) and points 3(a) and 3(b) of Annex VII to Regulation (EU) No 517/2014

Applicable for the first time to reporting on activities carried out in 2018 (by 31 March 2019 at the latest) and until and including the year in which Union law ceases to apply to and in the United Kingdom.

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixtures containing at least one of those gases or for each gas or mixture contained in pre-blended polyols.

AUTOMATICALLY CALCULATED QUANTITIES COMMENTS
13aA Amount of hydrofluorocarbons physically placed on the market, excluding exempted uses 13aA = 4M – Sum of exempted uses in Section 5 (5A – 5F)
INFORMATION TO BE REPORTED
13aB Thereof: amount placed on the United Kingdom market for the first time

Amounts placed on the United Kingdom market, but subsequently supplied to [F2Great Britain] (without United Kingdom) in bulk are not to be included

Amounts supplied to the United Kingdom market in bulk that were previously placed on [F2Great Britain] (without United Kingdom) market are to be included

AUTOMATICALLY CALCULATED QUANTITIES
13aC Thereof: amount placed on [F2Great Britain] market, excluding the United Kingdom 13aC = 13aA – 13aB]