I.APPROVAL MARK
1.The approval mark shall be made up of:
(a)
a rectangle, within which shall be placed the letter ‘e’ followed by a distinguishing number or letter for the country which has issued the approval in accordance with the following conventional signs:
Belgium
6,
Bulgaria
34,
Czech Republic
8,
Denmark
18,
Germany
1,
Estonia
29,
Ireland
24,
Greece
23,
Spain
9,
France
2,
Croatia
25,
Italy
3,
Cyprus
CY,
Latvia
32,
Lithuania
36,
Luxembourg
13,
Hungary
7,
Malta
MT,
Netherlands
4,
Austria
12,
Poland
20,
Portugal
21,
Romania
19,
Slovenia
26,
Slovakia
27,
Finland
17,
Sweden
5,
United Kingdom
11,
and
(b)
an approval number corresponding to the number of the approval certificate drawn up for the prototype of the recording equipment or the record sheet or to the number of a tachograph card, placed at any point within the immediate proximity of that rectangle.
2.The approval mark shall be shown on the descriptive plaque of each set of equipment and on each record sheet and on each tachograph card. It must be indelible and must always remain clearly legible.
3.The dimensions of the approval mark drawn below(1) are expressed in millimetres, these dimensions being minima. The ratios between the dimensions must be maintained.
(1)
These figures are shown for guidance only.