- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
There are outstanding changes not yet made to Commission Implementing Regulation (EU) 2016/799. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
The front page shall contain:
B BG CZ CY | Belgium Bulgaria Czech Republic Cyprus | LV L LT M | Latvia Luxembourg Lithuania Malta |
DK | Denmark | NL | The Netherlands |
D EST | Germany Estonia | A PL | Austria Poland |
GR | Greece | P RO SK SLO | Portugal Romania Slovakia Slovenia |
E | Spain | FIN | Finland |
F HR H | France Croatia Hungary | S | Sweden |
IRL | Ireland | UK | The United Kingdom |
I | Italy |
Driver card | Control Card | Company or Workshop card | |
---|---|---|---|
1. | surname of the driver | control body name | company or workshop name |
2. | first name(s) of the driver | surname of the controller (if applicable) | surname of card holder (if applicable) |
3. | birth date of the driver | first name(s) of the controller (if applicable) | first name(s) of card holder (if applicable) |
4.a | card start of validity date | ||
4.b | card expiry date | ||
4.c | the name of the issuing authority (may be printed on reverse page) | ||
4.d | a different number from the one under heading 5, for administrative purposes (optional) | ||
5. a | Driving licence number (at the date of issue of the driver card) | — | — |
5. b | Card number | ||
6. | Photograph of the driver | photograph of the controller (optional) | photograph of the fitter (optional)- |
7. | Signature of the holder (optional) | ||
8. | Normal place of residence, or postal address of the holder (optional). | Postal address of control body | postal address of company or workshop |
The reverse page shall contain:
:
white,
:
blue,
:
red,
:
yellow.
a security design background with fine guilloche patterns and rainbow printing,
in the area of the photograph, the security design background and the photograph shall overlap,
at least one two-coloured microprint line.
The system security aims at protecting integrity and authenticity of data exchanged between the cards and the recording equipment, protecting the integrity and authenticity of data downloaded from the cards, allowing certain write operations onto the cards to recording equipment only, decrypting certain data, ruling out any possibility of falsification of data stored in the cards, preventing tampering and detecting any attempt of that kind.
ISO/IEC 7810 Identification cards — Physical characteristics,
ISO/IEC 7816 Identification cards — Integrated circuit cards:
Part 1: Physical characteristics,
Part 2: Dimensions and position of the contacts (ISO/IEC 7816-2:2007),
Part 3: Electrical interface and transmission protocols (ISO/IEC 7816-3:2006),
Part 4: Organisation, security and commands for interchange (ISO/IEC 7816-4:2013 + Cor 1:2014),
Part 6: Interindustry data elements for interchange (ISO/IEC 7816-6:2004 + Cor 1:2006),
Part 8: Commands for security operations (ISO/IEC 7816-8:2004).
Tachograph cards shall be tested in accordance to ISO/IEC 10373-3:2010 Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices.
For the purpose of this paragraph,
times are recorded with a resolution of one minute, unless otherwise specified,
odometer values are recorded with a resolution of one kilometre,
speeds are recorded with a resolution of 1 km/h,
positions (latitudes and longitudes) are recorded in degrees and minutes with a resolution of 1/10 of minute.
The tachograph cards functions, commands and logical structures, fulfilling data storage requirements are specified in Appendix 2.
If not otherwise specified, data storage on tachograph cards shall be organized in such a way, that new data replaces stored oldest data in case the foreseen memory size for the particular records is exhausted.
DF Tachograph, which contains the application accessible to first generation vehicle units, which is also present in first generation tachograph cards,
DF Tachograph_G2, which contains the application only accessible to second generation vehicle units, which is only present in second generation tachograph cards.
The full details of the tachograph cards structure are specified in Appendix 2.
clock stop,
card serial number (including manufacturing references),
card type approval number,
card personaliser identification (ID),
embedder ID,
IC identifier.
IC serial number,
IC manufacturing references.
in the case the tachograph card supports extended length fields, the extended length information data object specified in Appendix 2.
in the case the tachograph card supports extended length fields, the extended length information data objects specified in Appendix 2.
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date.
surname of the holder,
first name(s) of the holder,
date of birth,
preferred language.
date and time of last card download (for other purposes than control).
issuing Member State, issuing authority name,
driving licence number (at the date of the issue of the card).
For the purpose of this subparagraph, time shall be stored with a resolution of 1 second.
Time overlap (where this card is the cause of the event),
Card insertion while driving (where this card is the subject of the event),
Last card session not correctly closed (where this card is the subject of the event),
Power supply interruption,
Motion data error,
Security breach attempts.
Event code,
Date and time of beginning of the event (or of card insertion if the event was on-going at that time),
Date and time of end of the event (or of card withdrawal if the event was on-going at that time),
VRN and registering Member State of vehicle in which the event happened.
Note: For the ‘Time overlap’ event:U.K.
Date and time of beginning of the event shall correspond to the date and time of the card withdrawal from the previous vehicle,
Date and time of end of the event shall correspond to the date and time of card insertion in current vehicle,
Vehicle data shall correspond to the current vehicle raising the event.
Note: For the ‘Last card session not correctly closed’ event:U.K.
date and time of beginning of event shall correspond to the card insertion date and time of the session not correctly closed,
date and time of end of event shall correspond to the card insertion date and time of the session during which the event was detected (current session),
Vehicle data shall correspond to the vehicle in which the session was not correctly closed.
For the purpose of this subparagraph, time shall be recorded with a resolution of 1 second.
[F1Card fault (where this card is the subject of the fault),]
Recording equipment fault.
Textual Amendments
Fault code,
Date and time of beginning of the fault (or of card insertion if the fault was on-going at that time),
Date and time of end of the fault (or of card withdrawal if the fault was on-going at that time),
VRN and registering Member State of vehicle in which the fault happened.
the date,
a daily presence counter (increased by one for each of these calendar days),
the total distance travelled by the driver during this day,
a driver status at 00:00,
whenever the driver has changed of activity, and/or has changed of driving status, and/or has inserted or withdrawn his card:
the driving status (CREW, SINGLE),
the slot (DRIVER, CO-DRIVER),
the card status (INSERTED, NOT INSERTED),
the activity (DRIVING, AVAILABILITY, WORK, BREAK/REST),
the time of the change.
date and time of first use of the vehicle (i.e. first card insertion for this period of use of the vehicle, or 00h00 if the period of use is on-going at that time),
vehicle odometer value at that time,
date and time of last use of the vehicle, (i.e. last card withdrawal for this period of use of the vehicle, or 23h59 if the period of use is on-going at that time),
vehicle odometer value at that time,
VRN and registering Member State of the vehicle.
the date and time of the entry (or the date/time related to the entry if the entry is made during the manual entry procedure),
the type of entry (begin or end, condition of entry),
the country and region entered,
the vehicle odometer value.
date and time the session was opened (i.e. card insertion) with a resolution of one second,
VRN and registering Member State.
date and time of the control,
control card number and card issuing Member State,
type of the control (displaying and/or printing and/or VU downloading and/or card downloading (see note)),
Period downloaded, in case of downloading,
VRN and registering Member State of the vehicle in which the control happened.
Note: card downloading will only be recorded if performed through a recording equipment.U.K.
Date and time of the entry,
Type of specific condition.
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date.
surname of the holder,
first name(s) of the holder,
date of birth,
preferred language.
date and time of last card download (for other purposes than control).
issuing Member State, issuing authority name,
driving licence number (at the date of the issue of the card).
For the purpose of this subparagraph, time shall be stored with a resolution of 1 second.
Time overlap (where this card is the cause of the event),
Card insertion while driving (where this card is the subject of the event),
Last card session not correctly closed (where this card is the subject of the event),
Power supply interruption,
Communication error with the remote communication facility,
Absence of position information from GNSS receiver event,
Communication error with the external GNSS facility
Motion data error,
Vehicle motion conflict,
Security breach attempts,
Time conflict.
Event code,
Date and time of beginning of the event (or of card insertion if the event was on-going at that time),
Date and time of end of the event (or of card withdrawal if the event was on-going at that time),
VRN and registering Member State of vehicle in which the event happened.
Note: For the ‘Time overlap’ event:U.K.
Date and time of beginning of the event shall correspond to the date and time of the card withdrawal from the previous vehicle,
Date and time of end of the event shall correspond to the date and time of card insertion in current vehicle,
Vehicle data shall correspond to the current vehicle raising the event.
Note: For the ‘Last card session not correctly closed’ event:U.K.
date and time of beginning of event shall correspond to the card insertion date and time of the session not correctly closed,
date and time of end of event shall correspond to the card insertion date and time of the session during which the event was detected (current session),
Vehicle data shall correspond to the vehicle in which the session was not correctly closed.
For the purpose of this subparagraph, time shall be recorded with a resolution of 1 second.
[F1Card fault (where this card is the subject of the fault),]
Recording equipment fault.
Fault code,
Date and time of beginning of the fault (or of card insertion if the fault was on-going at that time),
Date and time of end of the fault (or of card withdrawal if the fault was on-going at that time),
VRN and registering Member State of vehicle in which the fault happened.
the date,
a daily presence counter (increased by one for each of these calendar days),
the total distance travelled by the driver during this day,
a driver status at 00:00,
whenever the driver has changed of activity, and/or has changed of driving status, and/or has inserted or withdrawn his card:
the driving status (CREW, SINGLE)
the slot (DRIVER, CO-DRIVER),
the card status (INSERTED, NOT INSERTED),
the activity (DRIVING, AVAILABILITY, WORK, BREAK/REST).
the time of the change,
date and time of first use of the vehicle (i.e. first card insertion for this period of use of the vehicle, or 00h00 if the period of use is on-going at that time),
vehicle odometer value at that first use time,
date and time of last use of the vehicle, (i.e. last card withdrawal for this period of use of the vehicle, or 23h59 if the period of use is on-going at that time),
vehicle odometer value at that last use time,
VRN and registering Member State of the vehicle,
VIN of the vehicle.
the date and time of the entry (or the date/time related to the entry if the entry is made during the manual entry procedure),
the type of entry (begin or end, condition of entry),
the country and region entered,
the vehicle odometer value,
the vehicle position,
the GNSS accuracy, date and time when the position was determined.
date and time the session was opened (i.e. card insertion) with a resolution of one second,
VRN and registering Member State.
date and time of the control,
control card number and card issuing Member State,
type of the control (displaying and/or printing and/or VU downloading and/or card downloading (see note)),
Period downloaded, in case of downloading,
VRN and registering Member State of the vehicle in which the control happened.
Note: security requirements imply that card downloading will only be recorded if performed through a recording equipment.U.K.
Date and time of the entry,
Type of specific condition.
the date and time of the beginning of the period of use of the vehicle unit (i.e. first card insertion in the vehicle unit for the period),
the manufacturer of the vehicle unit,
the vehicle unit type,
the vehicle unit software version number.
the date and time when the accumulated driving time reaches a multiple of three hours,
the position of the vehicle,
the GNSS accuracy, date and time when the position was determined,
the vehicle odometer value.
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date.
workshop name,
workshop address,
surname of the holder,
first name(s) of the holder,
preferred language.
Purpose of calibration (activation, first installation, installation, periodic inspection,),
Vehicle identification,
Parameters updated or confirmed (w, k, l, tyre size, speed limiting device setting, odometer (new and old values), date and time (new and old values)),
Recording equipment identification (VU part number, VU serial number, motion sensor serial number).
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date.
workshop name,
workshop address,
surname of the holder,
first name(s) of the holder,
preferred language.
purpose of calibration (activation, first installation, installation, periodic inspection,),
vehicle identification,
parameters updated or confirmed (w, k, l, tyre size, speed limiting device setting, odometer (new and old values), date and time (new and old values),
recording equipment identification (VU part number, VU serial number, motion sensor serial number, remote communication facility serial number and external GNSS facility serial number, if applicable),
seal type and identifier of all seals in place,
ability of the VU to use first generation tachograph cards (enabled or not).
the date and time of the beginning of the period of use of the vehicle unit (i.e. first card insertion in the vehicle unit for the period),
the manufacturer of the vehicle unit,
the vehicle unit type,
the vehicle unit software version number.
the date and time when the accumulated driving time reaches a multiple of three hours,
the position of the vehicle,
the GNSS accuracy, date and time when the position was determined,
the vehicle odometer value.
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date (if any).
control body name,
control body address,
surname of the holder,
first name(s) of the holder,
preferred language.
date and time of the control,
type of the control (displaying and/or printing and/or VU downloading and/or card downloading and/or roadside calibration checking),
period downloaded (if any),
VRN and Member State registering authority of the controlled vehicle,
card number and card issuing Member State of the driver card controlled.
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date (if any).
control body name,
control body address,
surname of the holder,
first name(s) of the holder,
preferred language.
date and time of the control,
type of the control (displaying and/or printing and/or VU downloading and/or card downloading and/or roadside calibration checking)
period downloaded (if any),
VRN and Member State registering authority of the controlled vehicle,
card number and card issuing Member State of the driver card controlled.
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date (if any).
company name,
company address.
date and time of the activity,
type of the activity (VU locking in and/or out, and/or VU downloading and/or card downloading)
period downloaded (if any),
VRN and Member State registering authority of vehicle,
card number and card issuing Member State (in case of card downloading).
tachograph application identification,
type of tachograph card identification.
card number,
issuing Member State, issuing authority name, issue date,
card beginning of validity date, card expiry date (if any).
company name,
company address.
date and time of the activity,
type of the activity (VU locking in and/or out, and/or VU downloading and/or card downloading)
period downloaded (if any),
VRN and Member State registering authority of vehicle,
card number and card issuing Member State (in case of card downloading).
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys