Commission Implementing Regulation (EU) 2017/1153Dangos y teitl llawn

Commission Implementing Regulation (EU) 2017/1153 of 2 June 2017 setting out a methodology for determining the correlation parameters necessary for reflecting the change in the regulatory test procedure and amending Regulation (EU) No 1014/2010 (Text with EEA relevance)

Article 8U.K.Amendments to Regulation (EU) No 1014/2010

Regulation (EU) No 1014/2010 is amended as follows:

(1)

Article 5 is amended as follows:

(a)

point (b) is replaced by the following:

‘(b)

for each vehicle, the deviation factor (De) and the verification factor determined in accordance with point 3.2.8 of Annex I to Commission Implementing Regulation (EU) 2017/1153(1);

(b)

the following third paragraph is added:

‘Notwithstanding the detailed data parameters referred to in Annex II to Regulation (EC) No 443/2009, a Member State shall, with regard to the data monitored until 31 December 2017, in addition to the already required parameters, report only the deviation factor “De” and the verification factor. From 1 January 2018 all detailed monitoring data specified in Annex II shall be monitored and reported.’;

(2)

Article 6 is deleted;

(3)

the following Article 9a is inserted:

Article 9aPreparation of the provisional dataset

1.The provisional dataset to be notified to a manufacturer in accordance with the second subparagraph of Article 8(4) of Regulation (EC) No 443/2009 shall include the records which, on the basis of the manufacturer’s name and, from 1 January 2018, the vehicle identification number, can be attributed to that manufacturer.

The central register referred to in the first subparagraph of Article 8(4) of Regulation (EC) No 443/2009 shall not include any data on vehicle identification numbers.

2.The processing of the vehicle identification numbers shall not include the processing of any personal data that could be linked to those numbers or any other data that could permit the linking of vehicle identification numbers with personal data.;

(4)

Annex I is replaced by the text in Annex II to this Regulation.

(1)

Commission Implementing Regulation (EU) 2017/1153 of 2 June 2017 setting out a methodology for determining the correlation parameters necessary for reflecting the change in the regulatory test procedure and amending Regulation (EU) No 1014/2010 (OJ L 175, 7.7.2017, p. 679).’;