Commission Regulation (EU) 2017/2158Dangos y teitl llawn

Commission Regulation (EU) 2017/2158 of 20 November 2017 establishing mitigation measures and benchmark levels for the reduction of the presence of acrylamide in food (Text with EEA relevance)

II. Analysis U.K.

1.FBOs shall provide sufficient data to enable an assessment of the level of acrylamide and of the likelihood that the product type might exceed the benchmark level.U.K.

2.The sample shall be analysed in a laboratory that participates in appropriate proficiency testing schemes (which comply with the ‘International Harmonised Protocol for the Proficiency Testing of (Chemical) Analytical Laboratories’(1) developed under the auspices of IUPAC/ISO/AOAC) and uses approved analytical methods for detection and quantification. Laboratories shall be able to demonstrate that they have internal quality control procedures in place. Examples of these are the ‘ISO/AOAC/IUPAC Guidelines on Internal Quality Control in Analytical Chemistry Laboratories’(2).U.K.

Wherever possible the trueness of analysis shall be estimated by including suitable certified reference materials in the analysis.

3.The method of analysis used for the analysis of acrylamide must comply with the following performance criteriaU.K.

ParameterCriterion
ApplicabilityFoods specified in this Regulation
SpecificityFree from matrix or spectral interferences
Field blanksLess than Limit of Detection (LOD)
Repeatability (RSDr)0,66 times RSDR as derived from (modified) Horwitz equation
Reproducibility (RSDR)as derived from (modified) Horwitz equation
Recovery75-110 %
Limit of Detection (LOD)Three tenths of LOQ
Limit of Quantification (LOQ)

For benchmark level < 125 μg/kg: ≤ two fifths of the benchmark level (however not required to be lower than 20 μg/kg)

For benchmark level ≥ 125 μg/kg: ≤ 50 μg/kg

4.Analysis of acrylamide can be replaced by measurement of product attributes (e.g. colour) or process parameters provided that a statistical correlation can be demonstrated between the product attributes or process parameters and the acrylamide level.U.K.

(1)

M. Thompson et al, Pure and Applied Chemistry, 2006, 78, pp. 145-196.

(2)

Edited by M. Thompson and R. Wood, Pure and Applied Chemistry, 1995, 67, pp. 649-666.