Commission Implementing Regulation (EU) 2018/2066Dangos y teitl llawn

3.1 Tiers for carbon content U.K.

The operator shall apply one of the tiers listed in this point. For deriving the carbon content from an emission factor, the operator shall use the following equations:

(a) for emission factors expressed as t CO₂/TJ

:

C = (EF × NCV) / f

(b) for emission factors expressed as t CO₂/t

:

C = EF / f

In those formulae, C is the carbon content expressed as fraction (tonne carbon per tonne product), EF is the emission factor, NCV is the net calorific value, and f is the factor laid down in Article 36(3).

Where a biomass fraction is determined for a mixed fuel or material, the tiers defined shall relate to the total carbon content. The biomass fraction of the carbon shall be determined using the tiers defined in section 2.4 of this Annex.

Tier 1: The operator shall apply one of the following:

(a)

the carbon content derived from standard factors listed in Annex VI sections 1 and 2;

(b)

other constant values in accordance with point (e) of Article 31(1), where no applicable value is contained in Annex VI sections 1 and 2.

Tier 2a: The operator shall derive the carbon content from country specific emission factors for the respective fuel or material in accordance with point (b) or (c) of Article 31(1) or values in accordance with point (d) of Article 31(1).

Tier 2b: The operator shall derive the carbon content from emission factors for the fuel based on one of the following established proxies in combination with an empirical correlation as determined at least once per year in accordance with Articles 32 to 35:

(a)

density measurement of specific oils or gases common, for example, to the refinery or steel industry;

(b)

net calorific value for specific coals types.

The operator shall ensure that the correlation satisfies the requirements of good engineering practice and that it is applied only to values of the proxy which fall into the range for which it was established.

Tier 3: The operator shall apply one of the following:

(a)

determination of the carbon content in accordance with the relevant provisions of Articles 32 to 35;

(b)

the empirical correlation as specified for Tier 2b, where the operator demonstrates to the satisfaction of the competent authority that the uncertainty of the empirical correlation does not exceed 1/3 of the uncertainty value to which the operator has to adhere with regard to the activity data determination of the relevant fuel or material.