Chwilio Deddfwriaeth

Regulation (EU) 2018/858 of the European Parliament and of the CouncilDangos y teitl llawn

Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC (Text with EEA relevance)

 Help about advanced features

Nodweddion Uwch

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

Mae hon yn eitem o ddeddfwriaeth sy’n deillio o’r UE

Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3

Changes over time for: ANNEX VIII

 Help about opening options

Version Superseded: 31/12/2022

Status:

Point in time view as at 01/09/2020.

Changes to legislation:

Regulation (EU) 2018/858 of the European Parliament and of the Council, ANNEX VIII is up to date with all changes known to be in force on or before 05 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.

ANNEX VIIIU.K. CONDITIONS FOR THE USE OF VIRTUAL TESTING METHODS BY A MANUFACTURER OR A TECHNICAL SERVICE

1.Objectives and scopeU.K.

This Annex lays down provisions concerning virtual testing in accordance with Article 30(7).

2.List of regulatory actsU.K.

SubjectRegulatory act reference
3BRear underrun protective devices (RUPDs) and their installation; rear underrun protection (RUP)

Regulation (EC) No 661/2009

UN Regulation No 58

6AVehicle access and manoeuvrability (steps, running boards and handholds)

Regulation (EC) No 661/2009

Regulation (EU) No 130/2012

6BDoor latches and door retention components

Regulation (EC) No 661/2009

UN Regulation No 11

8ADevices for indirect vision and their installation

Regulation (EC) No 661/2009

UN Regulation No 46

12AInterior fittings

Regulation (EC) No 661/2009

UN Regulation No 21

16AExternal projections

Regulation (EC) No 661/2009

UN Regulation No 26

20AInstallation of lighting and light-signalling devices on vehicles

Regulation (EC) No 661/2009

UN Regulation No 48

27ATowing device

Regulation (EC) No 661/2009

Regulation (EU) No 1005/2010

32AForward field of vision

Regulation (EC) No 661/2009

UN Regulation No 125

35AWindscreen wiper and washer systems

Regulation (EC) No 661/2009

Regulation (EU) No 1008/2010

37AWheel guards

Regulation (EC) No 661/2009

Regulation (EU) No 1009/2010

42ALateral protection of goods vehicles

Regulation (EC) No 661/2009

UN Regulation No 73

48AMasses and dimensions

Regulation (EC) No 661/2009

Regulation (EU) No 1230/2012

49ACommercial vehicles with regard to their external projections forward of the cab's rear panel

Regulation (EC) No 661/2009

UN Regulation No 61

50AMechanical coupling components of combinations of vehicles

Regulation (EC) No 661/2009

UN Regulation No 55

50BClose-coupling device (CCD); fitting of an approved type of CCD

Regulation (EC) No 661/2009

UN Regulation No 102

52AM2 and M3 vehicles

Regulation (EC) No 661/2009

UN Regulation No 107

52BStrength of the superstructure of large passenger vehicles

Regulation (EC) No 661/2009

UN Regulation No 66

57AFront underrun protective devices (FUPDs) and their installation; front underrun protection (FUP)

Regulation (EC) No 661/2009

UN Regulation No 93

Appendix 1General conditions for the use of virtual testing methods

1.Virtual test patternU.K.

The following scheme shall be used as basis structure for describing and conducting virtual testing:

(a)

purpose;

(b)

structure model;

(c)

boundary conditions;

(d)

load assumptions;

(e)

calculation;

(f)

assessment;

(g)

documentation.

2.Fundamentals of computer simulation and calculationU.K.

2.1.Mathematical modelU.K.

The mathematical model shall be supplied by the manufacturer. It shall reflect the complexity of the structure of the vehicle, system, component or separate technical unit to be tested in relation to the requirements of the relevant regulatory act and its boundary conditions.

The same provisions shall apply for testing components or separate technical units independently from the vehicle.

2.2.Validation process of the mathematical modelU.K.

The mathematical model shall be validated against the actual test conditions.

To that effect a physical test shall be conducted to compare the results obtained when using the mathematical model with the results of a physical test. Comparability of the test results shall be proven. The manufacturer or the technical service shall draft a validation report and submit it to the approval authority.

Any change to the mathematical model or to the software that is likely to invalidate the validation report shall be brought to the attention of the approval authority, which may require that a new validation process is conducted.

The flow chart of the validation process is shown in Appendix 3.

2.3.DocumentationU.K.

The manufacturer shall make available to the technical service and document the data and auxiliary tools used for simulation and calculation.

3.Tools and supportU.K.

The manufacturer shall supply the technical service at its request with the necessary tools to conduct the virtual testing, including appropriate software, or provide that technical service access to these tools.

The manufacturer shall also provide appropriate support to the technical service.

The access and support provided by the manufacturer to a technical service does not exempt the technical service from its obligations regarding the skills of its personnel, the payment of licence rights and confidentiality.

Appendix 2Specific conditions for the use of virtual testing methods

1.List of regulatory actsU.K.

Regulatory act referenceAnnex and paragraphsSpecific conditions
3B

Regulation (EC) No 661/2009

UN Regulation No 58

Paragraphs 2.3, 7.3. and 25.6 of UN Regulation No 58.Dimensions and resistance to forces.
6A

Regulation (EC) No 661/2009

Regulation (EU) No 130/2012

Annex II, Part 1 and 2 of Regulation (EU) No 130/2012.Dimensions of steps, running boards and handholds.
6B

Regulation (EC) No 661/2009

UN Regulation No 11

Annex 3 of UN Regulation No 11.

Annex 4, paragraph 2.1. of UN Regulation No 11.

Annex 5 of UN Regulation No 11.

Tensile strength tests and resistance of latches to acceleration.
8A

Regulation (EC) No 661/2009

UN Regulation No 46

Paragraph 15.2.4. of UN Regulation No 46.Prescribed fields of vision of rear-view mirrors.
12A

Regulation (EC) No 661/2009

UN Regulation No 21

(a)Paragraphs 5. to 5.7. of UN Regulation No 21.
(a)Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions.
(b)Paragraph 2.3. of UN Regulation No 21.
(b)Determination of the head-impact zone.
16A

Regulation (EC) No 661/2009

UN Regulation No 26

Paragraph 5.2.4. of UN Regulation No 26

All provisions in paragraphs 5 (General requirements) and 6 (Particular requirements) of UN Regulation No 26.

Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions.
20A

Regulation (EC) No 661/2009

UN Regulation No 48

Paragraph 6. (Individual specifications), and Annexes 4, 5 and 6 to UN Regulation No 48.The test drive provided for in paragraph 6.22.9.2.2 shall be performed on a real vehicle.
27A

Regulation (EC) No 661/2009

Regulation (EU) No 1005/2010

Annex II, point 1.2. of Regulation (EU) No 1005/2010.Tractive and compressive static force.
32A

Regulation (EC) No 661/2009

UN Regulation No 125

Paragraph 5 (Specifications) of UN Regulation No 125.Obstructions and field of vision.
35A

Regulation (EC) No 661/2009

Regulation (EU) No 1008/2010

Annex III, points 1.1.2. and 1.1.3. of Regulation (EU) No 1008/2010.Determination of the swept area only.
37A

Regulation (EC) No 661/2009

Regulation (EU) No 1009/2010

Annex II, point 2. of Regulation (EU) No 1009/2010.Verification of the dimensional requirements.
42A

Regulation (EC) No 661/2009

UN Regulation No 73

Paragraph 12.10 of UN Regulation No 73.Resistance under a horizontal force and deflection measurement.
48A

Regulation (EC) No 661/2009

Regulation (EU) No 1230/2012

(a)Annex I, Part B, points 7 and 8 of Regulation (EU) No 1230/2012.
(a)Check of compliance with the manoeuvrability requirements including manoeuvrability of vehicles fitted with lift- or loadable axles.
(b)Annex I, Part C, points 6 and 7 of Regulation (EU) No 1230/2012.
(b)Measurement of the maximum rear swing-out.
49A

Regulation (EC) No 661/2009

UN Regulation No 61

Paragraphs 5 and 6 of UN Regulation No 61.Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions.
50A

Regulation (EC) No 661/2009

UN Regulation No 55

(a)Annex 5 ‘Requirements for mechanical coupling devices’ of UN Regulation No 55.
(a)All provisions of paragraphs 1 to 8 included.
(b)Annex 6, paragraph 1.1. of UN Regulation No 55.
(b)Strength tests on mechanicals couplings of simple design may be replaced by virtual tests.
(c)Annex 6, paragraph 3 of UN Regulation No 55.
(c)Paragraphs 3.6.1. (Strength test), 3.6.2. (Resistance to buckling) and 3.6.3. (Resistance to bending moment) only.
52A

Regulation (EC) No 661/2009

UN Regulation No 107

Annex 3 of UN Regulation No 107.Paragraph 7.4.5. (calculation method).
52B

Regulation (EC) No 661/2009

UN Regulation No 66

Annex 9 of UN Regulation No 66.Computer simulation of rollover test on complete vehicle as an equivalent approval method.
57A

Regulation (EC) No 661/2009

UN Regulation No 93

Annex 5, paragraph 3 of UN Regulation No 93.Resistance under a horizontal force and deflection measurement.

Appendix 3Validation process

Yn ôl i’r brig

Options/Help

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys

Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.

Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.

Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill