- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
There are currently no known outstanding effects for the Commission Regulation (EU) 2019/1782, ANNEX II.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
from 1 April 2020, the no-load condition power consumption shall not exceed the following values:
AC-AC external power supplies, except low voltage and multiple voltage output external power supplies | AC-DC external power supplies, except low voltage and multiple voltage output external power supplies | Low voltage external power supplies | Multiple voltage output external power supplies | |
---|---|---|---|---|
PO ≤ 49,0 W | 0,21 W | 0,10 W | 0,10 W | 0,30 W |
PO > 49,0 W | 0,21 W | 0,21 W | 0,21 W | 0,30 W |
from 1 April 2020, the average active efficiency shall be not less than the following values:
AC-AC external power supplies, except low voltage and multiple voltage output external power supplies | AC-DC external power supplies, except low voltage and multiple voltage output external power supplies | Low voltage external power supplies | Multiple voltage output external power supplies | |
---|---|---|---|---|
PO ≤ 1,0 W | 0,5 × PO/1W+ 0,160 | 0,5 × PO/1W+ 0,160 | 0,517 × PO/1W+ 0,087 | 0,497 × PO/1W+ 0,067 |
1 W < PO ≤ 49,0 W | 0,071 × ln(PO/1W) – 0,0014 × PO/1W+ 0,67 | 0,071 × ln(PO/1W) – 0,0014 × PO/1W+ 0,67 | 0,0834 × ln(PO/1W) – 0,0014 × Po/1W+ 0,609 | 0,075 × ln(PO/1W) + 0,561 |
PO > 49,0 W | 0,880 | 0,880 | 0,870 | 0,860 |
from 1 April 2020, the nameplate shall include the following information:
Nameplate information | Value and precision | Unit | Notes |
---|---|---|---|
Output power | X,X | W | In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage — Output current – Output power shall be given. |
Output voltage | X,X | V | In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage — Output current – Output power shall be given. |
Output current | X,X | A | In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage — Output current – Output power shall be given. |
from 1 April 2020, instruction manuals for end-users (where applicable), and free access websites of manufacturers, importers or authorised representatives shall include the following information, in the order as set out below:
Information published | Value and precision | Unit | Notes |
---|---|---|---|
Manufacturer’s name or trade mark, commercial registration number and address | - | - | - |
Model identifier | - | - | - |
Input voltage | X | V | Specified by the manufacturer. Shall be a value or a range. |
Input AC frequency | X | Hz | Specified by the manufacturer. Shall be a value or a range. |
Output voltage | X,X | V | Nameplate output voltage. Shall indicate whether is AC or DC. In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage — Output current – Output power shall be published. |
Output current | X,X | A | Nameplate output current. In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage — Output current – Output power shall be published. |
Output power | X,X | W | Nameplate output power. In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage — Output current – Output power shall be published. |
Average active efficiency | X,X | % | Declared by the manufacturer based on the value calculated as arithmetical mean of efficiency at load conditions 1-4. In cases where multiple average active efficiencies are declared for multiple output voltages available at load condition 1, the value published shall be the average active efficiency declared for the lowest output voltage. |
Efficiency at low load (10 %) | X,X | % | Declared by the manufacturer based on the value calculated at load condition 5. External power supplies with a nameplate output power of 10 W or less shall be exempted from this requirement. In cases where multiple average active efficiencies are declared for multiple output voltages available at load condition 1, the value published shall be the value declared for the lowest output voltage. |
No-load power consumption | X,XX | W | Declared by the manufacturer based on the value measured for load condition 6. |
The relevant load conditions are as follows:
Percentage of nameplate output current | |
Load condition 1 | 100 % ± 2 % |
Load condition 2 | 75 % ± 2 % |
Load condition 3 | 50 % ± 2 % |
Load condition 4 | 25 % ± 2 % |
Load condition 5 | 10 % ± 1 % |
Load condition 6 | 0 % (no-load condition) |
from 1 April 2020, the technical documentation for the purposes of conformity assessment pursuant to Article 4 shall contain the following elements:
for external power supplies with a nameplate output power greater than 10 watts:
Reported Quantity | Description |
---|---|
Root mean square output current (mA) | Measured at load conditions 1-5 |
Root mean square output voltage (V) | |
Active output power (W) | |
Root mean square input voltage (V) | Measured at load conditions 1-6 |
Root mean square input power (W) | |
Total harmonic distortion of the input current | |
True power factor | |
Power consumed (W) | Calculated at load conditions 1-5, measured at load condition 6 |
Active mode efficiency | Calculated at load conditions 1-5 |
Average active efficiency | Arithmetical mean of efficiency at load conditions 1-4 |
In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the relevant reported quantities shall be specified for each measurement.
The relevant load conditions are set out in point 2(b);
for external power supplies with a nameplate output power of 10 watts or less:
Reported Quantity | Description |
---|---|
Root mean square output current (mA) | Measured at load conditions 1-4 |
Root mean square output voltage (V) | |
Active output power (W) | |
Root mean square input voltage (V) | Measured at load conditions 1-4 and 6 |
Root mean square input power (W) | |
Total harmonic distortion of the input current | |
True power factor | |
Power consumed (W) | Calculated at load conditions 1-4, measured at load condition 6 |
Active mode efficiency | Calculated at load conditions 1-4 |
Average active efficiency | Arithmetical mean of efficiency at load conditions 1-4 |
In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the relevant reported quantities shall be specified for each measurement.
The relevant load conditions are set out in point 2(b).
For the purposes of compliance and verification of compliance with the requirements of this Regulation, measurements and calculations shall be made using [F1designated standards], or other reliable, accurate and reproducible methods, which take into account the generally recognised state of the art.
Textual Amendments
F1Words in Annex 2 para. 3 substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 16(7)
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys