- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Implementing Regulation (EU) 2020/2151Dangos y teitl llawn
Commission Implementing Regulation (EU) 2020/2151 of 17 December 2020 laying down rules on harmonised marking specifications on single-use plastic products listed in Part D of the Annex to Directive (EU) 2019/904 of the European Parliament and of the Council on the reduction of the impact of certain plastic products on the environment (Text with EEA relevance)
You are here:
Pa Fersiwn
Nodweddion Uwch
- Dangos Graddfa Ddaearyddol(e.e. Lloegr, Cymru, Yr Alban aca Gogledd Iwerddon)
- Dangos Llinell Amser Newidiadau
Rhagor o Adnoddau
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae hon yn eitem o ddeddfwriaeth sy’n deillio o’r UE
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
Changes over time for: ANNEX III
Changes to legislation:
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
ANNEX IIIU.K. Harmonised marking specifications for tobacco products with filters and filters marketed for use in combination with tobacco products
1.Unit packet as defined in point 30 of Article 2 of Directive 2014/40/EU (‘unit packet’) and outside packaging as defined in point 29 of Article 2 of Directive 2014/40/EU (‘outside packaging’) for tobacco products with filters with the surface area of 10 cm2 or more; and packaging for filters marketed for use in combination with tobacco products with the surface area of 10 cm2 or more shall bear the following printed marking:U.K.
Note
:
the black line bordering the marking is not part thereof. Its only purpose is to show the thin white line bordering the marking against the white page.
By way of derogation from the first sentence of this point, the marking of unit packet and outside packaging for tobacco products with filters and packaging for filters marketed for use in combination with tobacco products placed on the market before 4 July 2022 may be affixed by means of stickers.
2.The marking shall comply with the requirements laid down in this point.U.K.
(a)
Position of the marking
(i)
Tobacco products with filters
The marking shall be placed horizontally on the external back surface of the unit packet and on the outside packaging.
Where the marking of the minimum size cannot fit horizontally on the external back surface of the unit packet, it may be rotated 90° and placed vertically on the back surface or on any of the external lateral surfaces of the unit packet. In all cases, it shall be clearly visible.
The boxes of the marking shall not be separated.
The marking shall not obstruct in any way the visibility of the health warnings required by Directive 2014/40/EU.
The marking shall not be totally or partially covered by other labels or stamps.
When opening the unit packet and of the outside packaging in accordance with any instructions, the marking should not be torn or made illegible.
(ii)
Filters marketed for use in combination with tobacco products
The marking shall be placed horizontally on the external front or top surface, whichever is more clearly visible, of the packaging.
Where the marking of the minimum size cannot fit in its entirety on the external front or top surface of the packaging, it may be placed horizontally partly on two sides of the packaging, i.e. top and front or front and side, whichever is more clearly visible.
Where it is not possible to place the marking horizontally due to the shape or size of the packaging, it may be rotated 90° and placed vertically.
The boxes of the marking shall not be separated.
When opening of the packaging in accordance with any instructions, the marking should not be torn or made illegible.
(b)
Size of the marking
The marking shall be composed of two equal-sized red and blue boxes, which are placed next to each other, and a rectangular black box containing the information text ‘PLASTIC IN FILTER’ placed below the two equal-sized boxes. The ratio between the height and length of the marking shall be 1:2.
(i)
Tobacco products with filters
Where the area of the external back surface of the unit packet is less than 65 cm2, the minimum size of the marking shall be 1,4 cm by 2,8 cm (3,92 cm2). In all other cases, the marking shall cover at least 6 % of the surface area on which it is placed. The maximum required size of the marking shall be 3 cm by 6 cm (18 cm2).
(ii)
For filters marketed for use in combination with tobacco products
Where the area of the external front or top surface of the packaging on which the marking is placed is less than 65 cm2, the minimum size of the marking shall be 1,4 cm by 2,8 cm (3,92 cm2). In all other cases, the marking shall cover at least 6 % of the surface area on which it is placed. The maximum required size of the marking shall be 3 cm by 6 cm (18 cm2).
(c)
Design of the marking
The design of the marking shall be reproduced without adding any effects, adjusting the colours, retouching or extending the background. The marking shall be reproduced at a minimum resolution of 300 dots per inch when printed in actual size. The marking shall be bordered by a thin white line.
The information text ‘PLASTIC IN FILTER’ shall be in upper case and in Helvetica Bold font. The font size shall be a minimum of 5 pt and a maximum of 14 pt.
Where the information text is translated into another or several official languages of the Member States, the translated information text shall be placed either close below the marking, or inside the rectangular black box below the first language, and shall be in both cases clearly visible. In exceptional cases due to spatial constraints on the external front or top surface of the packaging, the information text translated into another or several official languages of the Member States may be placed elsewhere on the packaging as close as possible to the marking and where it is clearly visible. The translated information text shall be in upper case and in Helvetica Bold font. The font size shall be a minimum of 5 pt and a maximum of 14 pt. Where the information text in additional languages is placed in the rectangular black box, derogations from the maximum required size of the marking are possible.
The colours having the following colour codes shall be used:
White: C = 0 / M = 0 / Y = 0 / K = 0
Black: C = 0 / M = 0 / Y = 0 / K = 100
Red: C = 0 / M = 90 / Y = 60 / K = 0
Blue: C = 60 / M = 0 / Y = 0 / K = 0.
Options/Help
Print Options
PrintThe Whole Regulation
PrintThis Annex only
Mae deddfwriaeth ar gael mewn fersiynau gwahanol:
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Dewisiadau Agor
Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd
Rhagor o Adnoddau
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
- y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
- rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
- pob fformat o’r holl ddogfennau cysylltiedig
- slipiau cywiro
- dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Llinell Amser Newidiadau
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Rhagor o Adnoddau
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
- y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
- slipiau cywiro
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys
- rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
- manylion rhoi grym a newid cyffredinol
- pob fformat o’r holl ddogfennau cysylltiedig
- dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Mae’r holl gynnwys ar gael dan Drwydded Llywodraeth Agored v3.0 ac eithrio ble nodir yn wahanol. Yn ychwanegol mae’r safle hwn â chynnwys sy’n deillio o EUR-Lex, a ailddefnyddiwyd dan delerau Penderfyniad y Comisiwn 2011/833/EU ar ailddefnyddio dogfennau o sefydliadau’r UE. Am ragor o wybodaeth gweler ddatganiad cyhoeddus Swyddfa Gyhoeddiadau’r UE ar ailddefnyddio.