- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (18/12/2020)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Council Regulation (EU) 2020/2231 of 18 December 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
Point in time view as at 18/12/2020.
There are currently no known outstanding effects for the Council Regulation (EU) 2020/2231.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
the entries with the following serial numbers are deleted:
0.3338, 0.3662, 0.4675, 0.4795, 0.4856, 0.4891, 0.4902, 0.4903, 0.4905, 0.4908, 0.4911, 0.4920, 0.4926, 0.4935, 0.4939, 0.4943, 0.4973, 0.4995, 0.5012, 0.5022, 0.5039, 0.5043, 0.5052, 0.5053, 0.5067, 0.5092, 0.5103, 0.5123, 0.5125, 0.5126, 0.5311, 0.5498, 0.5953, 0.6036, 0.6068, 0.6087, 0.6450, 0.6527, 0.6591, 0.6592, 0.6595, 0.6596, 0.6597, 0.6606, 0.6607, 0.6608, 0.6610, 0.6615, 0.6616, 0.6619, 0.6626, 0.6636, 0.6639, 0.6651, 0.6653, 0.6665, 0.6676, 0.6694, 0.6697, 0.6704, 0.6705, 0.6715, 0.6724, 0.6727, 0.6731, 0.6733, 0.6735, 0.6743, 0.6744, 0.6755, 0.6756, 0.6758, 0.6760, 0.6768, 0.6775, 0.6776, 0.6778, 0.6780, 0.6785, 0.6786, 0.6787, 0.6788, 0.6795, 0.6798, 0.6803, 0.6807, 0.6811, 0.6832, 0.6833, 0.6834, 0.6838, 0.6841, 0.6883, 0.6890, 0.6895, 0.6900, 0.6902, 0.6909, 0.6914, 0.6916, 0.6918, 0.6928, 0.6941, 0.6942, 0.6943, 0.6944, 0.6953, 0.6954, 0.7040, 0.7222, 0.7293, 0.7558, 0.7560, 0.7697, 0.7715 and 0.7855;
the following entries replace those entries that have the same serial numbers:
a However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. | ||||||
b Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1). | ||||||
c Only the ad valorem duty is suspended. The specific duty shall continue to apply.’; | ||||||
Serial Number | CN code | TARIC | Description | Rate of autonomous duty | Supplementary Unit | Date foreseen for mandatory review |
---|---|---|---|---|---|---|
‘0.6748 | ex 0709 59 10 | 10 | Fresh or chilled chanterelles for treatment other than simple repacking for retail salea b | 0 % | - | 31.12.2025 |
0.2864 | ex 1511 90 19 ex 1511 90 91 ex 1513 11 10 ex 1513 19 30 ex 1513 21 10 ex 1513 29 30 | 20 20 20 20 20 20 | Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:
| 0 % | - | 31.12.2021 |
0.6789 | ex 1512 19 10 | 10 | Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of
| 0 % | - | 31.12.2022 |
0.5004 | ex 2008 99 48 | 94 | Mango puree:
used in the manufacture of products of drink industryb | 6 % | - | 31.12.2022 |
0.4709 | ex 2008 99 49 ex 2008 99 99 | 30 40 | Seedless boysenberry puree not containing added spirit, whether or not containing added sugar | 0 % | - | 31.12.2025 |
0.6723 | ex 2008 99 91 | 20 | Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repackinga b | 0 %c | - | 31.12.2025 |
0.4992 | ex 2009 41 92 ex 2009 41 99 | 20 70 | Pineapple juice:
used in the manufacture of products of drink industryb | 8 % | - | 31.12.2025 |
0.7393 | ex 2712 90 99 | 10 | Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms | 0 % | - | 31.12.2022 |
0.6658 | ex 2805 12 00 | 10 | Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2) | 0 % | - | 31.12.2025 |
0.4979 | 2805 30 20 2805 30 30 2805 30 40 | Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more | 0 % | - | 31.12.2025 | |
0.6836 | ex 2811 22 00 | 15 | Amorphous silicon dioxide (CAS RN 60676-86-0)
| 0 % | - | 31.12.2022 |
0.5110 | ex 2818 10 91 | 20 | Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:
and
with less than 50 % of the total weight having a particle size of more than 10 mm | 0 % | - | 31.12.2025 |
0.6837 | ex 2818 30 00 | 20 | Aluminium hydroxide (CAS RN 21645-51-2)
| 0 % | - | 31.12.2025 |
0.7897 | ex 2825 20 00 | 10 | Lithium hydroxide monohydrate (CAS RN 1310-66-3) | 2.6 % | - | 31.12.2021 |
0.6819 | ex 2825 50 00 | 30 | Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm | 0 % | - | 31.12.2025 |
0.5055 | ex 2826 19 90 | 10 | Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more | 0 % | - | 31.12.2025 |
0.5090 | ex 2833 29 80 | 30 | Zirconium sulphate (CAS RN 14644-61-2) | 0 % | - | 31.12.2021 |
0.6632 | ex 2840 20 90 | 10 | Zinc borate (CAS RN 12767-90-7) | 0 % | - | 31.12.2025 |
0.7288 | ex 2841 50 00 | 11 | Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more | 2 % | - | 31.12.2021 |
0.4222 | ex 2841 90 85 | 10 | Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 % | 2.7 % | - | 31.12.2021 |
0.3419 | ex 2850 00 20 | 80 | Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more | 0 % | - | 31.12.2024 |
0.6633 | 2903 39 21 | Difluoromethane (CAS RN 75-10-5) | 0 % | - | 31.12.2025 | |
0.2583 | ex 2903 89 80 | 45 | 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more | 2 % | - | 31.12.2021 |
0.6611 | ex 2903 99 80 | 15 | 4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4) | 0 % | - | 31.12.2025 |
0.3409 | ex 2904 20 00 | 10 | Nitromethane (CAS RN 75-52-5) | 0 % | - | 31.12.2025 |
0.3391 | ex 2904 20 00 | 20 | Nitroethane (CAS RN 79-24-3) | 0 % | - | 31.12.2022 |
0.3408 | ex 2904 20 00 | 30 | 1-Nitropropane (CAS RN 108-03-2) | 0 % | - | 31.12.2025 |
0.6612 | ex 2904 99 00 | 25 | Difluoromethanesulphonyl chloride (CAS RN 1512-30-7) | 0 % | - | 31.12.2025 |
0.6613 | ex 2904 99 00 | 35 | 1-Fluoro-4-nitrobenzene (CAS RN 350-46-9) | 0 % | - | 31.12.2025 |
0.4934 | ex 2905 39 95 | 10 | Propane-1,3-diol (CAS RN 504-63-2) | 0 % | - | 31.12.2025 |
0.6757 | ex 2906 29 00 | 40 | 2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0) | 0 % | - | 31.12.2022 |
0.6782 | ex 2908 19 00 | 40 | 3,4,5-Trifluorophenol (CAS RN 99627-05-1) | 0 % | - | 31.12.2025 |
0.6915 | ex 2908 19 00 | 50 | 4-Fluorophenol (CAS RN 371-41-5) | 0 % | - | 31.12.2025 |
0.6649 | ex 2909 30 38 | 30 | 1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7) | 0 % | - | 31.12.2025 |
0.5117 | ex 2909 30 90 | 30 | 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) | 0 % | - | 31.12.2025 |
0.6614 | ex 2909 30 90 | 40 | 1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7) | 0 % | - | 31.12.2025 |
0.6783 | ex 2909 30 90 | 50 | 1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6) | 0 % | - | 31.12.2025 |
0.6784 | ex 2909 30 90 | 60 | 1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2) | 0 % | - | 31.12.2025 |
0.6927 | ex 2909 49 80 | 10 | 1-Propoxypropan-2-ol (CAS RN 1569-01-3) | 0 % | - | 31.12.2021 |
0.6660 | ex 2910 90 00 | 50 | 2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1) | 0 % | - | 31.12.2025 |
0.5135 | ex 2912 49 00 | 30 | Salicylaldehyde (CAS RN 90-02-8) | 0 % | - | 31.12.2025 |
0.6678 | ex 2912 49 00 | 40 | 3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0) | 0 % | - | 31.12.2025 |
0.4933 | ex 2914 29 00 | 30 | (R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) | 0 % | - | 31.12.2025 |
0.4932 | ex 2914 50 00 | 20 | 3'-Hydroxyacetophenone (CAS RN 121-71-1) | 0 % | - | 31.12.2025 |
0.6762 | ex 2914 50 00 | 75 | 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7) | 0 % | - | 31.12.2022 |
0.4948 | ex 2914 79 00 | 60 | 4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1) | 0 % | - | 31.12.2021 |
0.5119 | ex 2915 39 00 | 60 | Dodec-8-enyl acetate (CAS RN 28079-04-1) | 0 % | - | 31.12.2025 |
0.5121 | ex 2915 39 00 | 65 | Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) | 0 % | - | 31.12.2025 |
0.5120 | ex 2915 39 00 | 70 | Dodec-9-enyl acetate (CAS RN 16974-11-1) | 0 % | - | 31.12.2025 |
0.7541 | ex 2915 90 30 | 10 | Methyl laurate (CAS RN 111-82-0) | 0 % | - | 31.12.2025 |
0.4954 | ex 2915 90 70 | 60 | Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) | 0 % | - | 31.12.2025 |
0.3466 | ex 2916 13 00 | 30 | Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities | 0 % | - | 31.12.2025 |
0.4931 | ex 2916 20 00 | 60 | 3-Cyclohexylpropionic acid (CAS RN 701-97-3) | 0 % | - | 31.12.2025 |
0.4930 | ex 2916 39 90 | 30 | 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) | 0 % | - | 31.12.2025 |
0.6794 | ex 2916 39 90 | 41 | 4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8) | 0 % | - | 31.12.2025 |
0.6661 | ex 2916 39 90 | 53 | 5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0) | 0 % | - | 31.12.2025 |
0.4918 | ex 2917 19 80 | 50 | Tetradecanedioic acid (CAS RN 821-38-5) | 0 % | - | 31.12.2025 |
0.4945 | ex 2917 39 95 | 20 | Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) | 0 % | - | 31.12.2025 |
0.6796 | ex 2917 39 95 | 25 | Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5) | 0 % | - | 31.12.2025 |
0.3640 | ex 2917 39 95 | 30 | Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) | 0 % | - | 31.12.2025 |
0.6800 | ex 2917 39 95 | 35 | 1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8) | 0 % | - | 31.12.2025 |
0.6814 | ex 2918 99 90 | 13 | 3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0) | 0 % | - | 31.12.2025 |
0.6901 | ex 2918 99 90 | 18 | Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) | 0 % | - | 31.12.2025 |
0.6747 | ex 2918 99 90 | 85 | Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more | 0 % | - | 31.12.2025 |
0.5038 | ex 2920 29 00 | 20 | Tris(methylphenyl)phosphite (CAS RN 25586-42-9) | 0 % | - | 31.12.2025 |
0.5045 | ex 2920 29 00 | 40 | Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) | 0 % | - | 31.12.2025 |
0.7559 | ex 2920 90 10 | 15 | Ethyl methyl carbonate (CAS RN 623-53-0) | 3.2 % | - | 31.12.2021 |
0.6598 | ex 2920 90 70 | 80 | Bis(pinacolato)diboron (CAS RN 73183-34-3) | 0 % | - | 31.12.2025 |
0.4917 | ex 2921 29 00 | 40 | Decamethylenediamine (CAS RN 646-25-3) | 0 % | - | 31.12.2025 |
0.4862 | ex 2921 30 99 | 30 | 1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) | 0 % | - | 31.12.2021 |
0.5124 | ex 2921 43 00 | 60 | 3-Aminobenzotrifluoride (CAS RN 98-16-8) | 0 % | - | 31.12.2025 |
0.6825 | ex 2921 49 00 | 60 | 2,6-Diisopropylaniline (CAS RN 24544-04-5) | 0 % | - | 31.12.2025 |
0.6947 | ex 2922 19 00 | 35 | 2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7) | 0 % | - | 31.12.2025 |
0.6624 | ex 2922 29 00 | 30 | 1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4) | 0 % | - | 31.12.2025 |
0.6634 | ex 2922 29 00 | 63 | Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.4956 | ex 2922 29 00 | 75 | 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) | 0 % | - | 31.12.2025 |
0.4914 | ex 2922 39 00 | 20 | 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) | 0 % | - | 31.12.2025 |
0.6761 | ex 2922 39 00 | 35 | 5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5) | 0 % | - | 31.12.2025 |
0.7853 | ex 2922 49 85 | 13 | Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more | 0 % | - | 31.12.2024 |
0.5037 | ex 2922 49 85 | 17 | Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8) | 0 % | - | 31.12.2025 |
0.6948 | ex 2922 49 85 | 30 | Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8) | 0 % | - | 31.12.2021 |
0.6650 | ex 2922 49 85 | 65 | Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6) | 0 % | - | 31.12.2025 |
0.5063 | ex 2923 90 00 | 75 | Tetraethylammonium hydroxide, in the form of an aqueous solution containing:
| 0 % | - | 31.12.2025 |
0.3689 | ex 2924 19 00 | 23 | Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more | 2 % | - | 31.12.2021 |
0.5066 | ex 2924 29 70 | 40 | N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) | 0 % | - | 31.12.2025 |
0.5127 | ex 2924 29 70 | 45 | Propoxur (ISO) (CAS RN 114-26-1) | 0 % | - | 31.12.2025 |
0.5069 | ex 2924 29 70 | 55 | N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5) | 0 % | - | 31.12.2025 |
0.6767 | ex 2924 29 70 | 62 | 2-Chlorobenzamide (CAS RN 609-66-5) | 0 % | - | 31.12.2025 |
0.6766 | ex 2924 29 70 | 64 | N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8) | 0 % | - | 31.12.2025 |
0.6934 | ex 2926 90 70 | 17 | Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more | 0 % | - | 31.12.2025 |
0.6259 | ex 2926 90 70 | 26 | Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal productsb | 0 % | - | 31.12.2024 |
0.6871 | ex 2928 00 90 | 23 | Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.4929 | ex 2928 00 90 | 25 | Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution | 0 % | - | 31.12.2025 |
0.6635 | ex 2928 00 90 | 50 | Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 % | 0 % | - | 31.12.2025 |
0.5035 | ex 2930 90 98 | 10 | 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) | 0 % | - | 31.12.2022 |
0.6769 | ex 2930 90 98 | 22 | Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more | 0 % | - | 31.12.2025 |
0.6873 | ex 2930 90 98 | 26 | Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more | 0 % | - | 31.12.2025 |
0.6617 | ex 2930 90 98 | 53 | Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9) | 0 % | - | 31.12.2025 |
0.5114 | ex 2930 90 98 | 55 | Thiourea (CAS RN 62-56-6) | 0 % | - | 31.12.2025 |
0.6917 | ex 2931 90 00 | 63 | Chloroethenyldimethylsilane (CAS RN 1719-58-0) | 0 % | - | 31.12.2021 |
0.6946 | ex 2931 90 00 | 65 | Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6) | 0 % | - | 31.12.2021 |
0.6620 | ex 2932 20 90 | 65 | Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0) | 0 % | - | 31.12.2025 |
0.7639 | ex 2932 99 00 | 27 | (2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more | 0 % | - | 31.12.2023 |
0.4907 | ex 2932 99 00 | 50 | 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) | 0 % | - | 31.12.2021 |
0.6771 | ex 2932 99 00 | 65 | 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5) | 0 % | - | 31.12.2025 |
0.7811 | ex 2933 19 90 | 33 | Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicineb | 0 % | - | 31.12.2024 |
0.6835 | ex 2933 21 00 | 55 | 1-Aminohydantoin hydrochloride (CAS RN 2827-56-7) | 0 % | - | 31.12.2025 |
0.5115 | ex 2933 21 00 | 80 | 5,5-Dimethylhydantoin (CAS RN 77-71-4) | 0 % | - | 31.12.2025 |
0.6812 | ex 2933 39 99 | 14 | N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) | 0 % | - | 31.12.2022 |
0.4842 | ex 2933 39 99 | 20 | Copper pyrithione powder (CAS RN 14915-37-8) | 0 % | - | 31.12.2021 |
0.6813 | ex 2933 39 99 | 26 | 2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6) | 0 % | - | 31.12.2022 |
0.5129 | ex 2933 39 99 | 85 | 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) | 0 % | - | 31.12.2025 |
0.6773 | ex 2933 49 10 | 50 | 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0) | 0 % | - | 31.12.2025 |
0.4927 | ex 2933 49 90 | 30 | Quinoline (CAS RN 91-22-5) | 0 % | - | 31.12.2025 |
0.6763 | ex 2933 59 95 | 21 | N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2) | 0 % | - | 31.12.2025 |
0.6677 | ex 2933 59 95 | 47 | 6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more | 0 % | - | 31.12.2025 |
0.6774 | ex 2933 69 80 | 13 | Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more | 0 % | - | 31.12.2025 |
0.6621 | ex 2933 69 80 | 15 | 2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6) | 0 % | - | 31.12.2025 |
0.6951 | ex 2933 69 80 | 17 | Benzoguanamine (CAS RN 91-76-9) | 0 % | - | 31.12.2021 |
0.5131 | ex 2933 69 80 | 55 | Terbutryn (ISO) (CAS RN 886-50-0) | 0 % | - | 31.12.2025 |
0.4957 | ex 2933 69 80 | 60 | Cyanuric acid (CAS RN 108-80-5) | 0 % | - | 31.12.2025 |
0.4985 | ex 2933 79 00 | 70 | (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2) | 0 % | - | 31.12.2025 |
0.6872 | ex 2933 99 80 | 16 | Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more | 0 % | - | 31.12.2025 |
0.6829 | ex 2933 99 80 | 21 | 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1) | 0 % | - | 31.12.2025 |
0.6599 | ex 2933 99 80 | 54 | 3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6) | 0 % | - | 31.12.2025 |
0.6933 | ex 2933 99 80 | 87 | Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more | 0 % | - | 31.12.2025 |
0.4955 | ex 2934 20 80 | 60 | Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) | 0 % | - | 31.12.2022 |
0.4910 | ex 2934 20 80 | 70 | N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) | 0 % | - | 31.12.2025 |
0.4942 | ex 2934 99 90 | 25 | 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) | 0 % | - | 31.12.2025 |
0.6824 | ex 2934 99 90 | 39 | 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) | 0 % | - | 31.12.2025 |
0.6823 | ex 2934 99 90 | 41 | 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8) | 0 % | - | 31.12.2025 |
0.6893 | ex 2934 99 90 | 44 | Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more | 0 % | - | 31.12.2025 |
0.5133 | ex 2934 99 90 | 86 | Dithianon (ISO) (CAS RN 3347-22-6) | 0 % | - | 31.12.2025 |
0.5136 | ex 2934 99 90 | 87 | 2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) | 0 % | - | 31.12.2025 |
0.5036 | ex 2935 90 90 | 42 | Penoxsulam (ISO) (CAS RN 219714-96-2) | 0 % | - | 31.12.2025 |
0.6777 | ex 2935 90 90 | 54 | Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.6802 | ex 2935 90 90 | 56 | N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) | 0 % | - | 31.12.2025 |
0.6903 | ex 2935 90 90 | 57 | N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) | 0 % | - | 31.12.2025 |
0.6664 | ex 2935 90 90 | 59 | Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more | 0 % | - | 31.12.2025 |
0.4944 | ex 2938 90 30 | 10 | Ammonium glycyrrhizate (CAS RN 53956-04-0) | 0 % | - | 31.12.2025 |
0.6600 | ex 3201 90 90 ex 3202 90 00 | 40 10 | Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3) | 0 % | - | 31.12.2021 |
0.5091 | ex 3204 11 00 | 20 | Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight | 0 % | - | 31.12.2021 |
0.5134 | ex 3204 11 00 | 45 | Preparation of dispersion dyes, containing:
whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0) | 0 % | - | 31.12.2025 |
0.6652 | ex 3204 12 00 | 70 | Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight | 0 % | - | 31.12.2025 |
0.6603 | ex 3204 17 00 | 33 | Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight | 0 % | - | 31.12.2025 |
0.5100 | ex 3204 19 00 | 73 | Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight | 0 % | - | 31.12.2021 |
0.6726 | ex 3208 90 19 | 55 | Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent | 0 % | - | 31.12.2021 |
0.5031 | ex 3215 90 70 | 40 | Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:
for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devicesb | 0 % | - | 31.12.2025 |
0.4863 | ex 3402 11 90 | 10 | Sodium lauroyl methyl isethionate | 0 % | - | 31.12.2021 |
0.6725 | ex 3506 91 90 | 50 | Preparation containing by weight:
dissolved in:
| 0 % | - | 31.12.2021 |
0.6759 | ex 3802 10 00 | 10 | Mixture of activated carbon and polyethylene, in form of powder | 0 % | - | 31.12.2025 |
0.6874 | ex 3808 92 30 | 10 | Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or morea | 0 % | - | 31.12.2025 |
0.5048 | ex 3808 93 90 | 20 | Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:
of a kind used in plant growth regulators | 0 % | - | 31.12.2025 |
0.5030 | ex 3808 93 90 | 30 | Aqueous solution containing by weight:
for use in the manufacture of a plant growth regulatorb | 0 % | - | 31.12.2022 |
0.5088 | ex 3808 93 90 | 50 | Preparation in the form of powder, containing by weight:
of a kind used in plant growth regulators | 0 % | - | 31.12.2021 |
0.6532 | ex 3808 94 20 | 30 | Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:
| 0 % | - | 31.12.2024 |
0.6904 | ex 3811 21 00 | 12 | Dispersing agent containing :
used in the manufacture of blends of additives for lubricating oilsb | 0 % | - | 31.12.2025 |
0.6906 | ex 3811 21 00 | 14 | Dispersing agent :
used in the manufacture of blends of additives for lubricating oilsb | 0 % | - | 31.12.2025 |
0.6907 | ex 3811 21 00 | 16 | Detergent containing :
used in the manufacture of blends of additives for lubricating oilsb | 0 % | - | 31.12.2025 |
0.6905 | ex 3811 21 00 | 18 | Detergent containing :
used in the manufacture of blends of additives for lubricating oilsb | 0 % | - | 31.12.2025 |
0.6671 | ex 3811 21 00 | 75 | Additives containing:
with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oilsb | 0 % | - | 31.12.2022 |
0.6669 | ex 3811 21 00 | 77 | Antifoam additives consisting of:
for use in the manufacture of additive blends for lubricating oilsb | 0 % | - | 31.12.2022 |
0.6666 | ex 3811 21 00 | 80 | Additives containing :
with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oilsb | 0 % | - | 31.12.2022 |
0.6668 | ex 3811 29 00 | 65 | Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oilsb | 0 % | - | 31.12.2022 |
0.5062 | ex 3815 90 90 | 30 | Catalyst, consisting of a suspension in mineral oil of:
| 0 % | - | 31.12.2025 |
0.2783 | ex 3815 90 90 | 80 | Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol | 0 % | - | 31.12.2025 |
0.6810 | ex 3824 99 92 | 23 | Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol | 0 % | - | 31.12.2025 |
0.4909 | ex 3824 99 92 | 29 | Preparation containing by weight:
| 0 % | - | 31.12.2025 |
0.6779 | ex 3824 99 92 | 40 | Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent | 0 % | - | 31.12.2025 |
0.7742 | ex 3824 99 92 | 52 | Electrolyte containing:
for use in the manufacture of motor vehicle batteriesb | 3.2 % | - | 31.12.2021 |
0.5050 | ex 3824 99 92 | 61 | 3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine | 0 % | - | 31.12.2025 |
0.6720 | ex 3824 99 92 | 68 | Preparation containing by weight:
Dissolved in:
| 0 % | - | 31.12.2025 |
0.6719 | ex 3824 99 92 | 69 | Preparation containing by weight:
| 0 % | - | 31.12.2021 |
0.3069 | ex 3824 99 92 | 88 | 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1) | 0 % | - | 31.12.2025 |
0.4719 | ex 3824 99 93 | 35 | Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8) | 0 % | - | 31.12.2024 |
0.7313 | ex 3824 99 96 | 45 | Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:
| 3.2 % | - | 31.12.2021 |
0.6628 | ex 3824 99 96 | 46 | Manganese zinc ferrite granulate, containing by weight:
| 0 % | - | 31.12.2025 |
0.6749 | ex 3824 99 96 | 48 | Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 % | 0 % | - | 31.12.2025 |
0.6897 | ex 3901 40 00 | 30 | Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:
for use in the co-extrusion processing of films for flexible food packagingb | 0 % | m3 | 31.12.2025 |
0.6920 | ex 3901 90 80 | 53 | Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:
| 0 % | m3 | 31.12.2025 |
0.6734 | ex 3901 90 80 | 55 | Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:
| 0 % | - | 31.12.2025 |
0.5049 | ex 3901 90 80 | 67 | Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more | 0 % | - | 31.12.2025 |
0.6736 | ex 3903 90 90 | 65 | Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8) | 0 % | - | 31.12.2025 |
0.6804 | ex 3903 90 90 | 70 | Copolymer in the form of granules containing by weight:
| 0 % | m3 | 31.12.2025 |
0.4981 | ex 3904 69 80 | 81 | Poly(vinylidene fluoride) (CAS RN 24937-79-9) | 0 % | - | 31.12.2025 |
0.6672 | ex 3906 90 90 | 33 | Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm | 0 % | - | 31.12.2025 |
0.6663 | ex 3906 90 90 | 37 | Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm | 0 % | - | 31.12.2025 |
0.6891 | ex 3907 10 00 | 20 | Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine | 0 % | - | 31.12.2022 |
0.6839 | ex 3907 30 00 | 15 | Epoxide resin, halogen-free,
for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuitsb | 0 % | - | 31.12.2025 |
0.6840 | ex 3907 30 00 | 25 | Epoxide resin
| 0 % | - | 31.12.2025 |
0.4940 | ex 3907 99 80 ex 3913 90 00 | 30 20 | Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) | 0 % | - | 31.12.2025 |
0.5057 | ex 3907 99 80 | 80 | Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles | 0 % | - | 31.12.2025 |
0.5032 | ex 3909 40 00 | 20 | Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devicesb | 0 % | - | 31.12.2025 |
0.6921 | ex 3910 00 00 | 15 | Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated | 0 % | - | 31.12.2021 |
0.7217 | ex 3910 00 00 | 45 | Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8) | 0 % | - | 31.12.2021 |
0.5109 | ex 3911 90 99 | 35 | Alternated copolymer of ethylene and maleic anhydride (EMA) | 0 % | - | 31.12.2025 |
0.4953 | ex 3912 11 00 | 40 | Cellulose diacetate powder | 0 % | - | 31.12.2025 |
0.6718 | ex 3912 39 85 | 50 | Polyquaternium 10 (CAS RN 68610-92-4) | 0 % | - | 31.12.2025 |
0.4757 | ex 3919 10 80 | 37 | Polytetrafluoroethylene film:
| 0 % | - | 31.12.2025 |
0.4761 | ex 3919 10 80 ex 3919 90 80 | 43 26 | Ethylene vinyl acetate film:
| 0 % | - | 31.12.2022 |
0.6886 | ex 3919 10 80 | 63 | Reflecting film consisting of
| 0 % | - | 31.12.2025 |
0.4947 | ex 3919 90 80 | 65 | Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner | 0 % | - | 31.12.2025 |
0.4925 | ex 3919 90 80 | 70 | Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad | 0 % | - | 31.12.2025 |
0.4964 | ex 3919 90 80 | 82 | Reflecting film consisting of:
| 0 % | - | 31.12.2025 |
0.6640 | ex 3920 10 40 | 40 | Tubular layered film predominately of polyethylene:
| 0 % | - | 31.12.2025 |
0.3357 | ex 3920 62 19 | 48 | Sheets or rolls of poly(ethylene terephthalate):
| 0 % | - | 31.12.2025 |
0.2589 | ex 3920 62 19 | 52 | Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D257 method) | 0 % | - | 31.12.2023 |
0.6911 | ex 3921 19 00 | 40 | Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:
of a kind used for the manufacture of alkaline battery separators | 3.2 % | - | 31.12.2021 |
0.7263 | ex 3921 19 00 | 45 | Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
| 3.2 % | - | 31.12.2021 |
0.6742 | ex 3921 90 55 | 40 | Three layered fabric sheet, in rolls,
| 0 % | m2 | 31.12.2025 |
0.7335 | ex 3926 30 00 ex 3926 90 97 | 50 48 | Coated interior or exterior decorative parts consisting of:
for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705b | 0 % | p/st | 31.12.2022 |
0.6717 | ex 3926 90 97 | 23 | Plastic cover with clips for the exterior rear-view mirror of motor vehicles | 0 % | p/st | 31.12.2025 |
0.3850 | ex 3926 90 97 | 43 | Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm | 0 % | - | 31.12.2023 |
0.6708 | ex 4009 42 00 | 20 | Rubber brake hose with:
for use in the manufacture of goods of Chapter 87b | 0 % | - | 31.12.2025 |
0.6844 | ex 4016 93 00 | 30 | Rectangular ethylene-propylene-diene rubber gasket, with:
| 0 % | - | 31.12.2025 |
0.6884 | ex 5403 39 00 | 10 | Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industryb | 0 % | - | 31.12.2022 |
0.5059 | ex 5603 13 10 | 20 | Non-woven of spunbonded polyethylene, with a coating,
| 0 % | m2 | 31.12.2025 |
0.5987 | ex 5603 14 90 | 60 | Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:
| 0 % | m2 | 31.12.2023 |
0.4978 | ex 6909 19 00 | 20 | Silicon nitride (Si3N4) rollers or balls | 0 % | - | 31.12.2025 |
0.7619 | ex 7006 00 90 | 40 | Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:
| 0 % | - | 31.12.2023 |
0.6870 | ex 7009 10 00 | 40 | Electrochromic self-dimming inside rear-view mirror, consisting of:
for use in the manufacture of motor vehicles of Chapter 87b | 0 % | - | 31.12.2025 |
0.5021 | ex 7019 19 10 | 20 | Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate | 0 % | - | 31.12.2025 |
0.5020 | ex 7019 19 10 | 25 | Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate | 0 % | - | 31.12.2025 |
0.4853 | ex 7202 99 80 | 10 | Ferro-dysprosium, containing by weight:
| 0 % | - | 31.12.2025 |
0.7502 | ex 7318 24 00 | 40 | Tube or pipe restraint joint elements:
| 0 % | - | 31.12.2023 |
0.6680 | ex 7326 90 98 | 40 | Iron and steel weights
of a kind used for the production of remote controls | 0 % | - | 31.12.2025 |
0.5029 | ex 7604 29 10 ex 7606 12 99 ex 7606 12 99 | 10 21 25 | Sheets and bars of aluminium-lithium alloys | 0 % | - | 31.12.2022 |
0.5487 | ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 | 48 49 51 52 53 56 | Aluminium foil in rolls:
| 0 % | - | 31.12.2021 |
0.4050 | ex 7607 11 90 | 60 | Plain aluminium foil with the following parameters:
of a kind used for high voltage etching | 3.7 % | - | 31.12.2021 |
0.7698 | ex 7607 20 90 | 10 | Aluminium foil, in rolls:
for use in the manufacture of lithium-ion battery cell coversb | 3.7 % | - | 31.12.2021 |
0.6730 | ex 8101 96 00 | 10 | Tungsten wire containing by weight 99 % or more of tungsten with:
| 0 % | - | 31.12.2025 |
0.5097 | ex 8104 30 00 | 35 | Magnesium powder
| 0 % | - | 31.12.2025 |
0.4904 | ex 8108 90 30 | 45 | Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967 | 0 % | - | 31.12.2025 |
0.6805 | ex 8113 00 90 | 20 | Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules | 0 % | - | 31.12.2025 |
0.5024 | ex 8301 60 00 ex 8419 90 85 ex 8479 90 70 ex 8481 90 00 ex 8503 00 99 ex 8515 90 80 ex 8537 10 98 ex 8538 90 99 ex 8708 99 10 ex 8708 99 97 | 30 40 30 50 43 40 55 70 55 22 | Silicone or plastic keyboards, comprising:
| 0 % | p/st | 31.12.2025 |
0.4996 | ex 8407 90 90 | 20 | Compact Liquid Petroleum Gas (LPG) Engine System, with:
for use in the manufacture of vehicles of heading 8427b | 0 % | - | 31.12.2025 |
0.6160 | ex 8414 30 81 ex 8414 80 73 | 60 30 | Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:
for use in the manufacture of heat pumps for household appliances, including clothes dryersb | 0 % | - | 31.12.2023 |
0.7317 | ex 8414 80 22 | 20 | Air membrane compressor with:
of a kind used in the production of motor vehicle seats | 0 % | - | 31.12.2022 |
0.6842 | ex 8415 90 00 | 60 | Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:
| 0 % | p/st | 31.12.2025 |
0.6860 | ex 8415 90 00 | 65 | Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:
for use in the manufacture of car air-conditioning systemsb | 0 % | p/st | 31.12.2022 |
0.6821 | ex 8436 99 00 | 10 | Part containing:
and whether or not containing:
for use in the manufacture of garden shreddersb | 0 % | p/st | 31.12.2025 |
0.7380 | ex 8481 80 59 | 30 | Two-way flow control valve with housing, with:
| 0 % | - | 31.12.2022 |
0.7518 | ex 8481 90 00 | 40 | Valve armature:
| 0 % | - | 31.12.2023 |
0.4997 | ex 8483 40 90 | 80 | Transmission gearbox, with:
for use in the manufacture of goods of heading 8427b | 0 % | p/st | 31.12.2025 |
0.6854 | ex 8501 10 10 | 20 | Synchronous motor for a dishwasher with a water flow control mechanism with
| 0 % | - | 31.12.2022 |
0.6858 | ex 8501 10 99 | 64 | DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:
| 0 % | - | 30.06.2021 |
0.6880 | ex 8501 10 99 | 65 | Electric turbocharger actuator, with:
| 0 % | - | 31.12.2025 |
0.6627 | ex 8501 10 99 | 75 | Permanently excited DC motor with
| 0 % | - | 31.12.2025 |
0.4731 | ex 8501 31 00 | 37 | Permanently excited DC motor with
| 0 % | - | 31.12.2024 |
0.5577 | ex 8501 31 00 | 50 | DC motors, brushless, with:
| 0 % | - | 31.12.2022 |
0.6809 | ex 8501 31 00 ex 8501 32 00 | 53 45 | Automotive-ready, brushless and permanently excited direct current motor with:
| 0 % | - | 31.12.2025 |
| ||||||
0.6161 | ex 8503 00 99 | 55 | Stator for brushless motor, with:
of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums | 0 % | p/st | 31.12.2025 |
0.7764 | ex 8504 31 80 | 55 | Electrical transformer with:
| 0 % | - | 31.12.2024 |
0.7788 | ex 8505 11 00 | 68 | Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:
| 0 % | - | 31.12.2024 |
0.6857 | ex 8505 11 00 ex 8505 19 90 | 73 35 | Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:
| 0 % | p/st | 31.12.2022 |
0.7641 | ex 8507 60 00 | 13 | Prismatic lithium-ion electric accumulators with:
for use in the manufacture of rechargeable electric vehicle batteriesb | 1.3 % | - | 31.12.2021 |
0.6685 | ex 8507 60 00 | 15 | Cylindrical lithium-ion-accumulators or modules with:
for use in the manufacture of electric bicyclesb | 1.3 % | - | 31.12.2021 |
0.6625 | ex 8507 60 00 | 17 | Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:
| 1.3 % | - | 31.12.2021 |
0.7663 | ex 8507 60 00 | 18 | Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:
for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703b | 1.3 % | - | 31.12.2021 |
0.7717 | ex 8507 60 00 | 22 | Integrated battery system in a metal case with holders, consisting of:
for use in the manufacture of hybrid motor vehiclesb | 1.3 % | - | 31.12.2021 |
0.2907 | ex 8507 60 00 | 30 | Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteriesb | 1.3 % | - | 31.12.2021 |
0.6703 | ex 8507 60 00 | 33 | Lithium-ion accumulator, with:
| 1.3 % | - | 31.12.2021 |
0.6702 | ex 8507 60 00 | 37 | Lithium-ion accumulator, with:
| 1.3 % | - | 31.12.2021 |
0.5548 | ex 8507 60 00 | 50 | Modules for the assembly of batteries of ion lithium electric accumulators with:
| 1.3 % | - | 31.12.2021 |
0.5342 | ex 8507 60 00 | 65 | Cylindrical lithium ion cell with
| 1.3 % | - | 31.12.2021 |
0.7888 | ex 8507 60 00 | 68 | Lithium-ion accumulator in a metal housing, with
| 1.3 % | - | 31.12.2021 |
0.5356 | ex 8507 60 00 | 75 | Rectangular lithium-ion-accumulator, with
| 1.3 % | - | 31.12.2021 |
0.6753 | ex 8507 60 00 | 77 | Lithium-ion rechargeable batteries, with:
| 1.3 % | - | 31.12.2021 |
0.5014 | ex 8508 70 00 ex 8537 10 98 | 20 98 | Electronic circuit cards that:
| 0 % | p/st | 31.12.2025 |
0.6856 | ex 8512 20 00 | 30 | Lighting module, containing at least:
in an aluminium housing with a radiator, mounted at a bracket with an actuator | 0 % | p/st | 31.12.2025 |
0.6863 | ex 8512 30 90 | 20 | Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:
for use in the manufacture of goods of Chapter 87b | 0 % | p/st | 31.12.2022 |
0.6689 | ex 8529 90 65 | 28 | Electronic assembly comprising at least:
| 0 % | p/st | 31.12.2025 |
0.4893 | ex 8529 90 65 ex 8529 90 92 | 65 53 | Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module | 0 % | p/st | 31.12.2025 |
0.4890 | ex 8529 90 92 | 25 | LCD modules, not combined with touch screen facilities, solely consisting of:
for use in the manufacture of radios for motor vehiclesb | 0 % | p/st | 31.12.2025 |
0.6654 | ex 8529 90 92 | 37 | Fastening and covering ledges of aluminium alloy containing:
specifically shaped for use in the manufacture of TV setsb | 0 % | - | 31.12.2025 |
0.6629 | ex 8529 90 92 | 63 | LCD module
suitable for installation in motor vehicles of Chapter 87b | 0 % | p/st | 31.12.2025 |
0.5018 | ex 8529 90 92 | 67 | Colour LCD display panel for LCD monitors of heading 8528:
for use in the manufacture of vehicles of Chapter 87b | 0 % | p/st | 31.12.2025 |
0.6781 | ex 8529 90 92 | 85 | Colour LCD module in a housing:
for permanent installation in vehicles of Chapter 87b | 0 % | p/st | 31.12.2025 |
0.6849 | ex 8536 69 90 | 60 | Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processorsb | 0 % | p/st | 31.12.2022 |
0.5028 | ex 8536 69 90 | 84 | Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528b | 0 % | p/st | 31.12.2025 |
0.6864 | ex 8537 10 91 | 50 | Fuse control module in a plastic housing with mounting brackets comprising:
of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2025 |
0.6889 | ex 8537 10 98 | 35 | Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:
| 0 % | p/st | 31.12.2025 |
0.6866 | ex 8538 90 91 ex 8538 90 99 | 20 50 | Interior antenna for a car door locking system, comprising:
whether or not PCB including integrated circuits, diodes and transistors, for use in the manufacture of goods of Chapter 87b | 0 % | p/st | 31.12.2025 |
0.6710 | ex 8544 30 00 ex 8544 42 90 | 60 50 | Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87b | 0 % | - | 31.12.2025 |
0.6867 | ex 8544 30 00 | 85 | Extension two-core cable with two connectors, containing at least:
of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87 | 0 % | p/st | 31.12.2025 |
0.6853 | ex 8544 42 90 | 70 | Electric conductors:
for use in the manufacture of hearing aids, accessory kits and speech processorsb | 0 % | p/st | 31.12.2025 |
0.6861 | ex 8544 49 93 | 30 | Electric conductors:
for use in the manufacture of hearing aids, implants and speech processorsb | 0 % | m | 31.12.2025 |
0.5002 | ex 8545 90 90 | 40 | Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:
| 0 % | m2 | 31.12.2021 |
0.6707 | ex 8708 30 10 ex 8708 30 91 | 70 40 | Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2025 |
0.6869 | ex 8708 40 20 ex 8708 40 50 | 20 10 | Automatic hydrodynamic gearbox
for use in the manufacture of motor vehicles of Chapter 87b | 0 % | p/st | 31.12.2025 |
0.6648 | ex 8708 50 20 ex 8708 50 99 | 20 10 | Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
| 0 % | p/st | 31.12.2025 |
0.6711 | ex 8708 80 20 ex 8708 80 35 | 10 10 | Upper strut insulator containing:
for use in the manufacture of goods of Chapter 87b | 0 % | p/st | 31.12.2025 |
0.6859 | ex 8708 91 20 ex 8708 91 99 | 30 30 | Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:
of a kind used in heat exchangers for car cooling systems | 0 % | p/st | 31.12.2025 |
0.7716 | ex 8708 91 35 | 20 | Turbocharger cooling duct containing:
for use in the manufacture of compression ignition engines of motor vehiclesb | 0 % | - | 31.12.2024 |
0.6687 | ex 8708 95 10 ex 8708 95 99 | 10 20 | Inflatable safety cushion of high strength polyamide fibre:
| 0 % | p/st | 31.12.2025 |
0.6688 | ex 8708 95 10 ex 8708 95 99 | 20 30 | Inflatable safety cushion of high strength polyamide fibre:
| 0 % | p/st | 31.12.2025 |
0.7581 | ex 8708 50 20 ex 8708 50 99 | 60 15 | Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
| 0 % | - | 31.12.2024 |
0.6686 | ex 8714 10 90 | 10 |
| 0 % | p/st | 31.12.2025 |
0.6848 | ex 8714 10 90 | 70 | Motor bikes radiators in consignment of 100 pieces or more | 0 % | p/st | 31.12.2022 |
0.6879 | ex 8714 96 10 | 10 | Pedals, for use in the manufacture of bicycles (including electric bicycles)b | 0 % | - | 31.12.2025 |
0.6878 | ex 8714 99 90 | 30 | Seat posts, for use in the manufacture of bicycles (including electric bicycles)b | 0 % | p/st | 31.12.2025 |
0.4883 | ex 9001 90 00 | 85 | Light guide panel made of poly(methyl methacrylate):
for use in the manufacture of backlight units for flat screen TVsb | 0 % | - | 31.12.2025 |
0.7590 | ex 9002 11 00 | 18 | Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:
| 0 % | - | 31.12.2023 |
0.5692 | ex 9002 11 00 | 20 | Lenses:
| 0 % | - | 31.12.2022 |
0.5025 | ex 9401 90 80 | 10 | Ratchet disk for use in the manufacture of reclining car seatsb | 0 % | p/st | 31.12.2025 |
0.4846 | ex 9503 00 75 ex 9503 00 95 | 10 10 | Plastic cable car scale models, whether or not with a motor, for printingb | 0 % | p/st | 31.12.2025 |
0.6950 | ex 9607 20 10 | 10 | Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippersb | 0 % | - | 31.12.2022 |
0.6949 | ex 9607 20 90 | 10 | Narrow strips mounted with plastic chain scoops for use in the manufacture of zippersb | 0 % | - | 31.12.2025 |
the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:
a Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).’. | ||||||
Serial Number | CN code | TARIC | Description | Rate of autonomous duty | Supplementary Unit | Date foreseen for mandatory review |
---|---|---|---|---|---|---|
‘0.8021 | 2804 70 10 | Red phosphorus | 0 % | - | 31.12.2022 | |
0.8022 | 2804 70 90 | Phosphorus, other than red phosphorus | 0 % | - | 31.12.2023 | |
0.7974 | ex 2903 39 19 | 40 | 3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more | 0 % | - | 31.12.2025 |
0.8017 | ex 2903 99 80 | 25 | 2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.8018 | ex 2903 99 80 | 35 | 2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.7957 | ex 2904 99 00 | 55 | 2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more | 0 % | - | 31.12.2025 |
0.7963 | ex 2906 29 00 | 70 | 1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.8015 | ex 2914 29 00 | 35 | 4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.7955 | ex 2915 24 00 | 10 | Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.7980 | ex 2916 19 95 | 60 | Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2) | 0 % | - | 31.12.2025 |
0.7940 | ex 2916 19 95 | 70 | Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more | 0 % | - | 31.12.2025 |
0.7931 | ex 2916 20 00 | 25 | Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more | 0 % | - | 31.12.2025 |
0.7933 | ex 2916 20 00 | 35 | 2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.7929 | ex 2916 39 90 | 16 | 3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.8008 | ex 2918 29 00 | 40 | 3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 % | 0 % | - | 31.12.2025 |
0.7934 | ex 2918 99 90 | 43 | Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more | 0 % | - | 31.12.2025 |
0.7947 | ex 2921 29 00 | 70 | N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more | 0 % | - | 31.12.2025 |
0.8019 | ex 2921 49 00 | 45 | 2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.8020 | ex 2921 49 00 | 55 | 2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.7946 | ex 2922 19 00 | 29 | N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more | 0 % | - | 31.12.2025 |
0.7935 | ex 2922 19 00 | 70 | 2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.8000 | ex 2924 19 00 | 18 | 2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.8013 | ex 2925 19 95 | 40 | N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more | 0 % | - | 31.12.2025 |
0.7985 | ex 2930 90 98 | 88 | 1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more | 0 % | - | 31.12.2025 |
0.7951 | ex 2931 90 00 | 25 | N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.7958 | ex 2932 20 90 | 18 | 4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.7984 | ex 2932 20 90 | 23 | 1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more | 0 % | - | 31.12.2025 |
0.7978 | ex 2932 99 00 | 68 | 3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.7930 | ex 2932 99 00 | 73 | 5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.7936 | ex 2932 99 00 | 78 | Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.7954 | ex 2932 99 00 | 83 | 6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.7938 | ex 2933 19 90 | 43 | tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.7937 | ex 2933 29 90 | 23 | 1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.7976 | ex 2933 39 99 | 83 | 2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.7925 | ex 2933 39 99 | 84 | Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.7981 | ex 2933 39 99 | 86 | 3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.7939 | ex 2933 39 99 | 87 | 6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.7986 | ex 2933 39 99 | 88 | Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more | 0 % | - | 31.12.2025 |
0.7952 | ex 2933 69 80 | 33 | 2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more | 0 % | - | 31.12.2025 |
0.7927 | ex 2933 99 80 | 60 | 2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more | 0 % | - | 31.12.2025 |
0.7971 | ex 2933 99 80 | 70 | 5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.8014 | ex 2933 99 80 | 80 | Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more | 0 % | - | 31.12.2025 |
0.7926 | ex 2934 99 90 | 65 | Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more | 0 % | - | 31.12.2025 |
0.7944 | ex 2934 99 90 | 70 | 1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more | 0 % | - | 31.12.2025 |
0.7928 | ex 2935 90 90 | 44 | 4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more | 0 % | - | 31.12.2025 |
0.7943 | ex 3201 90 20 | 10 | Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less | 0 % | - | 31.12.2025 |
0.7975 | ex 3801 10 00 | 10 | Artificial graphite in powder form, (CAS RN 7782-42-5) with:
| 1.8 % | - | 31.12.2021 |
0.7994 | ex 3801 10 00 | 20 | Artificial graphite (CAS RN 7782-42-5) powder form, with:
| 1.8 % | - | 31.12.2021 |
0.7998 | ex 3815 90 90 | 38 | Photoinitiator, containing by weight:
| 0 % | - | 31.12.2025 |
0.7999 | ex 3815 90 90 | 48 | Photoinitiator containing by weight:
| 0 % | - | 31.12.2025 |
0.7950 | ex 3902 90 90 | 65 | Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39 | 0 % | - | 31.12.2025 |
0.7953 | ex 3910 00 00 | 65 | Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4) | 0 % | - | 31.12.2025 |
0.8009 | ex 3911 90 99 | 38 | Mixture containing by weight:
| 0 % | - | 31.12.2025 |
0.8010 | ex 3911 90 99 | 48 | Mixture containing by weight:
| 0 % | - | 31.12.2025 |
0.7949 | ex 3920 61 00 | 40 | Extruded thermoplastic foils or films of polycarbonate with:
for use in the production of retroreflective productsa | 0 % | - | 31.12.2025 |
0.8011 | ex 3920 62 19 ex 3920 62 90 | 68 20 | Poly(ethylene terephthalate) film in rolls:
| 0 % | - | 31.12.2025 |
0.8005 | ex 3920 99 28 | 48 | Thermoplastic polyurethane foil in rolls, with:
| 0 % | - | 31.12.2025 |
0.8024 | ex 5603 14 10 | 20 | Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:
| 0 % | m2 | 31.12.2023 |
0.8028 | ex 6909 19 00 | 40 | Ceramic-carbon absorption cartridges with the following characteristics:
of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles | 0 % | p/st | 31.12.2025 |
0.7913 | ex 7506 20 00 | 20 | Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:
| 0 % | - | 31.12.2025 |
0.7997 | ex 7616 99 90 | 35 | Aluminium plate with:
equipped with a polypropylene tape with:
for use in the manufacture of lithium-ion battery cells for motor vehicle batteriesa | 3 % | - | 31.12.2021 |
0.7966 | ex 8104 19 00 | 10 | Unwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium | 0 % | - | 31.12.2025 |
0.7942 | ex 8108 90 30 | 35 | Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm | 0 % | - | 31.12.2025 |
0.8012 | ex 8406 82 00 | 10 | Industrial steam turbine with:
| 0 % | - | 31.12.2025 |
0.7961 | ex 8409 91 00 ex 8481 90 00 | 55 60 | Nozzle body for the regulation of angle and distribution of fuel injection:
| 0 % | - | 31.12.2025 |
0.7965 | ex 8409 91 00 | 75 | Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:
| 0 % | - | 31.12.2025 |
0.7967 | ex 8409 91 00 ex 8481 90 00 | 80 70 | Nozzle needle for opening and closing the flow of fuel in the engine, with:
| 0 % | - | 31.12.2025 |
0.7969 | ex 8413 30 20 | 40 | High-pressure plunger pump for direct diesel injection, with:
| 0 % | - | 31.12.2025 |
0.7970 | ex 8413 30 20 | 50 | High-pressure plunger pump for direct diesel injection:
| 0 % | - | 31.12.2025 |
0.7996 | ex 8418 99 90 | 20 | Aluminium connecting block for connecting to a condenser manifold in welding process:
| 0 % | - | 31.12.2025 |
0.8004 | ex 8418 99 90 | 30 | Receiver dryer profile for connecting to a condenser manifold in welding process with:
| 0 % | - | 31.12.2025 |
0.7979 | ex 8479 89 97 | 55 | Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode | 0.8 % | - | 31.12.2021 |
0.7982 | ex 8479 89 97 | 65 | Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line | 0.8 % | - | 31.12.2021 |
0.7964 | ex 8479 90 70 | 40 | Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:
| 0 % | - | 31.12.2025 |
0.7968 | ex 8481 30 91 ex 8481 30 99 | 30 50 | Mechanical check (non-return) valve for opening and closing of the flow of fuel:
| 0 % | - | 31.12.2025 |
0.7960 | ex 8481 80 59 ex 8481 90 00 | 70 80 | Flow-control valve
| 0 % | - | 31.12.2025 |
0.7972 | ex 8527 29 00 ex 8529 90 65 | 10 38 | Satellite radio receiver module:
for use in the manufacture of products falling under heading 8527a | 0 % | - | 31.12.2025 |
0.7987 | ex 8708 50 20 ex 8708 50 55 | 15 50 | Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened | 0 % | - | 31.12.2025 |
0.7988 | ex 8708 50 20 ex 8708 50 99 | 25 45 | Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
| 0 % | - | 31.12.2025 |
0.7989 | ex 8708 50 20 ex 8708 50 99 | 35 50 | Inboard constant velocity joint tripod housing, with:
| 0 % | - | 31.12.2025 |
0.7990 | ex 8708 50 20 ex 8708 50 99 | 45 55 | Outboard constant velocity joint inner race, part of the vehicle’s drive system, with:
| 0 % | - | 31.12.2025 |
0.7991 | ex 8708 50 20 ex 8708 50 99 | 55 60 | Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:
| 0 % | - | 31.12.2025 |
0.7973 | ex 9002 11 00 | 23 | Lenses with:
| 0 % | - | 31.12.2025 |
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys