Road Traffic (Northern Ireland) Order 1981

[F1 Supplementary provisions relating to type approval and other certificates N.I.

31B.— (1) A type approval certificate may be issued under Article 31A(2) subject to conditions with respect to—

(a) the inspection by any person authorised for the purposes of this paragraph by the Department of motor vehicles purporting to conform with the type vehicle in the relevant aspects of design, construction, equipment and marking and the entry of premises where they are manufactured; and

(b) the notification by the manufacturer of differences of design, construction, equipment or marking (other than permitted variations) between any such motor vehicles and the type vehicle which might affect the type approval requirements.

(2) A type approval certificate may be issued under Article 31A(2) for a type vehicle where the Department is satisfied that one or more, but not all, of the relevant type approval requirements are complied with in the case of that vehicle, and—

(a) a further type approval certificate may be issued by virtue of this paragraph on the application of any person who manufactures any part of the vehicle or by whom the vehicle is finally assembled, and references in Article 31A and this Article to a manufacturer shall be construed accordingly;

(b) any certificate of conformity issued in consequence of any type approval certificate issued by virtue of this paragraph shall relate only to the requirement or requirements to which that type approval certificate relates;

(c) where a certificate of conformity issued in respect of a motor vehicle relates to one or more, but not all, of the relevant type approval requirements, the Department may issue in respect of that vehicle a Department's approval certificate relating to one or more of the other relevant type approval requirements.

(3) The Department may by notice in writing given to the manufacturer or owner of a motor vehicle for which a Department's approval certificate is issued direct that any specified alteration in any of the relevant aspects of design, construction, equipment or marking to which the direction relates shall be notified to the Department.

(4) Without prejudice to Article 31D, the Department may by regulations require that a Department's approval certificate issued for any motor vehicle shall specify any additional alteration to that vehicle required by any direction under paragraph (3) to be notified to the Department.

(5) If it appears to the Department that there has been a breach of a condition subject to which a type approval certificate has been granted or if the Department ceases to be satisfied as to any other matter relevant to a type approval certificate, the Department may cancel or suspend the certificate and where it does so, the Department shall give a written notification of that fact to the holder of the certificate stating the grounds for the cancellation or suspension; but the cancellation or suspension shall not affect the validity of any certificate of conformity previously issued in consequence of the type approval certificate.]

F1 1985 NI 6