xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

SCHEDULE 4N.I.LABELLING PARTICULARS FOR DANGEROUS SUBSTANCES, DANGEROUS PREPARATIONS AND FOR CERTAIN OTHER PREPARATIONS

PART IIN.I.PARTICULAR PROVISIONS CONCERNING CERTAIN PREPARATIONS

BN.I.SPECIAL PROVISIONS APPLYING TO ANY PREPARATION

Paints and varnishes containing leadN.I.

1.—(1) The label on the packaging of paints and varnishes containing lead in quantities exceeding 0.15% (expressed as weight of lead out of the total weight of the preparation and determined in accordance with ISO Standard 6503/1984) shall bear the following inscription—

(2) In the case of packages containing less than 125 millilitres of the preparations referred to in sub-paragraph (1), the inscription on the label may be—

Commencement Information

I1Sch. 4 Pt. II Ch. B para. 1 in operation at 27.7.2009, see reg. 1

Cyanoacrylate based adhesivesN.I.

2.—(1) The label on the immediate packaging of glues based on cyanoacrylates shall bear the following inscription—

(2) Appropriate safety advice shall accompany the package.

Commencement Information

I2Sch. 4 Pt. II Ch. B para. 2 in operation at 27.7.2009, see reg. 1

Preparations containing isocyanatesN.I.

3.  The label on the packaging of preparations containing isocyanates (whether as monomers, oligomers, prepolymers etc. or as preparations thereof) shall bear the following inscription—

Commencement Information

I3Sch. 4 Pt. II Ch. B para. 3 in operation at 27.7.2009, see reg. 1

Certain preparations containing epoxy constituentsN.I.

4.  The label on the packaging of preparations containing epoxy constituents with an average molecular weight ≤ 700 shall bear the following inscription—

Commencement Information

I4Sch. 4 Pt. II Ch. B para. 4 in operation at 27.7.2009, see reg. 1

Preparations intended to be sold to the general public that contain active chlorineN.I.

5.  The label on the packaging of preparations containing more than 1% of active chlorine which are intended to be sold to the general public shall bear the following inscription—

Commencement Information

I5Sch. 4 para. 5 in operation at 27.7.2009, see reg. 1

Preparations containing cadmium (alloys) intended to be used for brazing or solderingN.I.

6.  The label on the packaging of preparations containing cadmium (alloys) intended to be used for brazing or soldering shall bear the following inscription—

Commencement Information

I6Sch. 4 para. 6 in operation at 27.7.2009, see reg. 1

Preparations not classified as sensitising but containing at least one sensitising substanceN.I.

7.  The label on the packaging of preparations containing at least one substance classified as sensitising and being present in a concentration ≥ 0.1% or in a concentration greater than or equal to that specified under a specific note for the substance in Table 3.2 of part 3 of Annex VI of the CLP Regulation shall bear the inscription—

Commencement Information

I7Sch. 4 para. 7 in operation at 27.7.2009, see reg. 1

Liquid preparations containing halogenated hydrocarbonsN.I.

8.  For liquid preparations which show no flashpoint or a flashpoint higher than 55°C and contain a halogenated hydrocarbon and more than 5% flammable or highly flammable substances, the label on the packaging shall bear the following inscription as appropriate—

Commencement Information

I8Sch. 4 para. 8 in operation at 27.7.2009, see reg. 1

Preparations containing a substance assigned the risk phrase R67N.I.

9.  When a preparation contains one or more substances assigned the risk phrase R67, the label on the packaging of the preparation shall bear the following inscription—

Commencement Information

I9Sch. 4 para. 9 in operation at 27.7.2009, see reg. 1

Cement and cement preparationsN.I.

10.—(1) The label on the packaging of any cement or cement preparation which would contain, when hydrated, more than 0.0002% soluble chromium (VI) of the total dry weight of the cement but for the use of reducing agents shall be marked with information on the packing date, and on the storage conditions and the storage period appropriate to maintaining the activity of the reducing agent and to preventing the content of soluble chromium (VI) from exceeding 0.0002% of the total dry weight of the cement, unless it is supplied or used for controlled, closed and totally automated processes in which cement and cement-containing preparations are handled solely by machines and in which there is no possibility of contact with the skin.

(2) The label on the packaging of any cement or cement preparation containing more than 0.0002% soluble chromium (VI) of the total dry weight of the cement shall bear the inscription:

Commencement Information

I10Sch. 4 para. 10 in operation at 27.7.2009, see reg. 1