55 Type approval certificates.E+W+S
(1)Where the Secretary of State is satisfied on application made to him by the manufacturer of a vehicle of a class to which regulations under section 54 of this Act apply and after examination of the vehicle—
(a)that the vehicle complies with the relevant type approval requirements, and
(b)that adequate arrangements have been made to secure that other vehicles purporting to conform with that vehicle in the relevant aspects of design, construction, equipment and marking will so conform in all respects or with such variations as may be permitted,
he may approve that vehicle as a type vehicle.
(2)Where the Secretary of State approves a vehicle as a type vehicle he must issue a certificate (in this Part of this Act referred to as a “type approval certificate”) stating that the vehicle complies with the relevant type approval requirements and specifying—
(a)the permitted variations from the type vehicle, and
(b)the design weights for vehicles so conforming in all respects and for vehicles so conforming with any such variations.
(3)In the following provisions of this section and in sections 56 to 59 of this Act “conform” means conform in all respects or with any permitted variation.
(4)Subject to subsection (6) below, a type approval certificate may be issued for a type vehicle where the Secretary of State is satisfied that one or more, but not all, of the relevant type approval requirements are complied with in the case of that vehicle.
(5)A further type approval certificate may be issued by virtue of subsection (4) above on the application of any person—
(a)who manufactures any part of the vehicle, or
(b)by whom the vehicle is finally assembled;
and references in the following provisions of this section and in sections 56 to 59 of this Act to a manufacturer shall be construed accordingly.
(6)The first type approval certificate issued for a type vehicle by virtue of subsection (4) above must specify the design weights for conforming vehicles, and accordingly—
(a)so much of subsection (2) above or section 57 (1) to (3) of this Act as requires the Secretary of State or a manufacturer to specify in any certificate under this or that section the design weights or plated weights for a vehicle or as requires the Secretary of State or a manufacturer to mark or secure the marking of the plated weights on a vehicle does not apply to a subsequent type approval certificate issued by virtue of subsection (4) above or to the certificates of conformity issued in consequence of such a type approval certificate, and
(b)so much of section 58 (2) of this Act as requires the Secretary of State to specify in any certificate issued by him the design weights and plated weights for a vehicle or to secure that the plated weights are marked on a vehicle does not apply to a Minister’s approval certificate issued by virtue of subsection (4) above.
(7)Subsection (6) above does not apply in relation to vehicle parts.
(8)Where the Secretary of State determines on an application under this section not to issue a type approval certificate in respect of a vehicle, he must give to the applicant a written notification of the determination, stating the grounds on which it is based.