- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol). This item of legislation is currently only available in its original format. The electronic version of this UK Statutory Instrument has been contributed by Westlaw and is taken from the printed publication. Read more
51.—(1) The adjusting holes in weights made of iron other than those of the flat-circular type, shall be rectangular or circular, and shall not be greater in area than the area of a rectangle of the following approximate dimensions:—
Purported value of weight | Length | Width | Approximate minimum distance of lead from surface when new |
---|---|---|---|
inches | inches | inches | |
56 pounds | 2½ | 1¼ | 1¼ |
50 pounds | 2½ | 1¼ | 1¼ |
28 Pounds | 2 | 1 | 1 |
20 Pounds | 1½ | ¾ | ¾ |
14 pounds | 1¼ | ⅝ | ⅝ |
10 pounds | 1 | ½ | ½ |
7 pounds | 1 | ½ | ½ |
5 pounds | ¾ | ½ | ½ |
4 pounds | ¾ | ½ | ½ |
2 pounds | ⅝ | ½ | ½ |
1 pounds | ⅝ | ½ | ½ |
8 ounces | ⅝ | ⅜ | ¼ |
4 ounces | ½ | No math image to display | ¼ |
(2) The minimum distance of the lead (when new) from the surface of the weight shall correspond approximately to that specified in the fourth column of the foregoing table.
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys: