The Road Vehicles (Construction and Use) Regulations 1986

(see regulation 66)

SCHEDULE 8 E+W+S PLATES FOR CERTAIN VEHICLES

PART I E+W+S

Commencement Information

I1 Sch. 8 Pt. I in force at 11.8.1986, see reg. 1

Particulars to be shown on plate for motor vehicles (including motor vehicles forming part of articulated vehicles)

1.

Manufacturer's name.

2.

Vehicle type.

3.

Engine type and power (a).

4.

Chassis or serial number.

5.

Number of axles.

6.

Maximum axle weight for each axle (b).

7.

Maximum gross weight (c).

8.

Maximum train weight (d).

9.

Maximum weight in Great Britain for each axle (b) (e).

10.

Maximum gross weight in Great Britain (c) (e).

(a)

The power need not be shown in the case of a motor vehicle manufactured before 1st October 1972 (hereinafter in this Schedule referred to as “an excepted vehicle”) and shall not be shown in the case of any motor vehicle which is propelled otherwise than by a compression ignition engine.

(b)

This weight as respects each axle is the sum of the weights to be transmitted to the road surface by all the wheels of that axle.

(c)

This weight is the sum of the weights to be transmitted to the road surface by all the wheels of the motor vehicle (including any load imposed by a trailer, whether forming part of an articulated vehicle or not, on the motor vehicle).

(d)

This weight is the sum of the weights to be transmitted to the road surface by all the wheels of the motor vehicle and of any trailer drawn, but this item need not be completed where the motor vehicle is not constructed to draw a trailer.

b), (c), (d)

References to the weights to be transmitted to the road surface by all or any of the wheels of the vehicle or of any trailer drawn are references to the weights so to be transmitted both of the vehicle or trailer and of any load or persons carried by it.

(e)

This item need not be completed in the case of an excepted vehicle or in the case of a vehicle which is a locomotive or motor tractor.

PART II E+W+S

Commencement Information

I2 Sch. 8 Pt. II in force at 11.8.1986, see reg. 1

Particulars to be shown on plate for trailers (including trailers forming part of articulated vehicles)

1.

Manufacturer's name.

2.

Chassis or serial number.

3.

Number of axles.

4.

Maximum weight for each axle (a).

5.

Maximum load imposed on drawing vehicle (b).

6.

Maximum gross weight (c).

7.

Maximum weight in Great Britain for each axle (a) (e).

8.

Maximum gross weight in Great Britain (c) (f).

9.

Year of manufacture (d).

(a)

This weight as respects each axle is the sum of the weights to be transmitted to the road surface by all the wheels of that axle.

(b)

Only for trailers forming part of articulated vehicles or where some of the weight of the trailer or its load is to be imposed on the drawing vehicle. This item need not be completed in the case of a converter dolly [F1 manufactured before 1st February 1992]

(c)

This weight is the sum of the weights to be transmitted to the road surface by all the wheels of the trailer, including any weight of the trailer to be imposed on the drawing vehicle.

a), (b), (c)

References to the weights to be transmitted to the road surface by all or any of the wheels of the trailer are references to the weight so to be transmitted both of the trailer and of any load or persons carried by it and references to the weights to be imposed on the drawing vehicle are references to the weights so to be imposed both of the trailer and of any load or persons carried by it except where only the load of the trailer is imposed on the drawing vehicle.

(d)

This item need not be completed in the case of a trailer manufactured before 1st April 1970.

(e)

This item need not be completed in the case of a trailer manufactured before 1st October 1972.

(f)

This item need not be completed in the case of a trailer manufactured before 1st October 1972 or which forms part of an articulated vehicle.

Textual Amendments

F1 Words in Sch. 8 Pt. 2 added (1.11.1991) by The Road Vehicles (Construction and Use) (Amendment) (No. 1) Regulations 1991 (S.I. 1991/1526), regs. 1, 4

PART III E+W+S

1.  The power of an engine, which is to be shown only in the case of a compression ignition engine on the plate in respect of item 3 in Part I of this Schedule, shall be the amount in kilowatts equivalent to the installed power output shown in a type test certificate issued— E+W+S

(a) by a person authorised by the Secretary of State for the type of engine to which the engine conforms; and

(b) in accordance with either—

(i) the provisions relating to the installed brake power output specified in the British Standard Specification for the Performance of Diesel Engines for Road Vehicles published on 19th May 1971 under the number BS AU 141a: 1971;

(ii) the provisions relating to the net power specified in Community Directive 80/1269 but after allowance has been made for the power absorbed by such equipment, at its minimum power setting, driven by the engine of the vehicle as is fitted for the operation of the vehicle (other than its propulsion) such power being measured at the speed corresponding to the engine speed at which maximum engine power is developed; or

(iii) the provisions of Annex 10 of ECE Regulation 24.02 as further amended with effect from 15th February 1984 [F2 or Annex 10 of ECE Regulation 24.03 or Community Directive 88/195] relating to the method of measuring internal combustion engine net power, but after allowance has been made for the power absorbed by any disconnectable or progressive cooling fan, at its maximum setting, and by any other such equipment, at its minimum power setting, driven by the engine of the vehicle as is fitted for the operation of the vehicle (other than its propulsion), such power being measured at the speed corresponding to the engine speed at which maximum engine power is developed.

Textual Amendments

F2 Words in Sch. 8 Pt. 3 para. 1(b)(iii) inserted (26.6.1990) by The Road Vehicles (Construction and Use) (Amendment) (No. 2) Regulations 1990 (S.I. 1990/1131), regs. 1, 5

Commencement Information

I3 Sch. 8 Pt. 3 para. 1 in force at 11.8.1986, see reg. 1

2.—(1)  [F3 Subject to paragraph 3A,] the weights to be shown on the plate in relation to items 6, 7 and 8 in Part I and in relation to items 4, 5 and 6 in Part II shall be the weight limits at or below which the vehicle is considered fit for use, having regard to its design, construction and equipment and the stresses to which it is likely to be subject in use, by the Secretary of State if the vehicle is one to which the Type Approval for Goods Vehicles Regulations [F4 or the Motor Vehicles (Approval) Regulations 2001] apply, and by the manufacturer if the vehicle is one to which those Regulations do not apply.

Provided that, where alterations are made to a vehicle which may render the vehicle fit for use at weights which exceed those referred to above in this paragraph and shown on the plate—

(a) there may be shown on the plate, in place of any of those weights, such new weights as the manufacturer of the vehicle or any person carrying on business as a manufacturer of motor vehicles or trailers (or a person duly authorised on behalf of that manufacturer or any such person) or a person authorised by the Secretary of State considers to represent the weight limits at or below which the vehicle will then be fit for use, having regard to its design, construction and equipment and to those alterations and to the stresses to which it is likely to be subject in use; and

(b) the name of the person who has determined the new weights shall be shown on the plate as having made that determination and, where he is a person authorised by the Secretary of State, his appointment shall be so shown.

(2) In relation to a vehicle manufactured on or after 1st October 1972, in the foregoing paragraph—

(a) the references to equipment shall not be treated as including a reference to the type of tyres with which the vehicle is equipped; and

(b) for the words “weight limits at or below” in both places where they occur there shall be substituted the words “maximum weights at”.

Textual Amendments

F3 Words in Sch. 8 Pt. 3 para. 2(1) inserted (1.3.2001) by The Road Vehicles (Construction and Use) (Amendment) Regulations 2001 (S.I. 2001/306), regs. 1, 4(1)(a)

F4 Words in Sch. 8 Pt. 3 para. 2(1) inserted (1.3.2001) by The Road Vehicles (Construction and Use) (Amendment) Regulations 2001 (S.I. 2001/306), regs. 1, 4(1)(b)

Commencement Information

I4 Sch. 8 Pt. III para. 2 in force at 11.8.1986, see reg. 1

3.   [F5 Subject to paragraph 3A,] the weights to be shown on the plate in respect of—

(a) item 9 in Part I of this Schedule shall be the weights shown at item 6 in that Part and in respect of item 7 in Part II of this Schedule shall be the weights shown at item 4 in that Part, in each case reduced so far as necessary to indicate the maximum weight applicable to each axle of the vehicle, if the vehicle is not to be used in contravention of regulations 23, 75, 78 or 79, and if the tyres with which the vehicle is equipped are not, as respects strength, to be inadequate to support the weights to be so shown at item 9 and item 7;

(b) item 10 in the said Part I shall be the weight shown at item 7 in that Part and in respect of item 8 in the said Part II shall be the weight shown at item 6 in that Part, in each case reduced so far as necessary to indicate the maximum permissible weight applicable if the vehicle is not to be used in contravention of regulation 75 if the tyres with which the vehicle is equipped are not, as respects strength, to be inadequate to support the weights to be so shown at item 10 and item 8.

Textual Amendments

F5 Words in Sch. 8 Pt. 3 para. 3 inserted (1.3.2001) by The Road Vehicles (Construction and Use) (Amendment) Regulations 2001 (S.I. 2001/306), regs. 1, 4(2)

Commencement Information

I5 Sch. 8 Pt. III para. 3 in force at 11.8.1986, see reg. 1

[F6 3A.   In the case of a vehicle— E+W+S

(a) which complies with the requirements specified in regulation 4(2) of the Motor Vehicles (Approval) Regulations 2001;

(b) in respect of which a Minister’s approval certificate has been issued under section 58 of the 1988 Act for the purposes of the type approval requirements prescribed by those Regulations; and

(c) in respect of which a Minister’s approval certificate has not subsequently been issued under that section for the purposes of the type approval requirements prescribed by the Type Approval for Goods Vehicles Regulations,

the weight shown on the plate in relation to items 7 and 10 in Part I of this Schedule shall be 3,500 kg.]

Textual Amendments

F6 Sch. 8 Pt. 3 para. 3A inserted (1.3.2001) by The Road Vehicles (Construction and Use) (Amendment) Regulations 2001 (S.I. 2001/306), regs. 1, 4(3)

4.—(1) Subject to sub-paragraph (2) of this paragraph weights on plates first affixed to a vehicle on or after 1st October 1972 shall be shown in kilograms and weights on plates first so affixed before that date shall be shown in tons and decimals thereof. E+W+S

(2) Where a new weight is first shown on a plate by virtue of the proviso to paragraph 2(1) the weight shall be shown as if it was on a plate first affixed to a vehicle on the date it was first shown.

Commencement Information

I6 Sch. 8 Pt. III para. 4 in force at 11.8.1986, see reg. 1

5.  All letters and figures shown on the plate shall be not less than 6mm in height. E+W+S

Commencement Information

I7 Sch. 8 Pt. III para. 5 in force at 11.8.1986, see reg. 1

6.  In this Schedule references to the manufacturer of a motor vehicle or trailer are in relation to— E+W+S

(a) a vehicle constructed with a chassis which has not previously formed part of another vehicle, references to the person by whom that chassis was made;

(b) any other vehicle, references to the person by whom that vehicle was constructed.

Commencement Information

I8 Sch. 8 Pt. III para. 6 in force at 11.8.1986, see reg. 1