- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (01/09/1986)
- Gwreiddiol (a wnaed Fel)
Version Superseded: 29/04/1996
Point in time view as at 01/09/1986.
This revised version has been created from an electronic version contributed by Westlaw which was originally derived from the printed publication. Read more
There are currently no known outstanding effects for the The Weighing Equipment (Filling and Discontinuous Totalisting Automatic Weighing Machines) Regulations 1986, PART I.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. Discontinuous totalisers to which the requirements of Regulations 9 and 24 do not apply, ie are provided with a display of totalised weight only, shall be subject to material testing in accordance with the provisions of Part II of this Schedule.E+W+S
Commencement Information
I1Sch. 2 para. 1 in force at 1.9.1986, see reg. 1
2. Discontinuous totalisers which embody the facilities in Regulation 9 but not those in Regulation 24 shall be subject to the requirements of Regulation 32(2) in addition to the provisions of Part II of this Schedule.E+W+S
Commencement Information
I2Sch. 2 para. 2 in force at 1.9.1986, see reg. 1
3. Discontinuous totalisers to which Regulations 9 and 24 are applicable may, as an alternative to the testing in paragraph 2 above, be tested in accordance with the provisions of Part III of this Schedule.E+W+S
Commencement Information
I3Sch. 2 para. 3 in force at 1.9.1986, see reg. 1
4.—(1) Subject to sub-paragraph (2) below, in testing any discontinuous totaliser, the inspector shall satisfy himself that:—E+W+S
(a)it is properly balanced or set to zero when unloaded;
(b)any beam or leverwork has sufficient room for oscillation and returns to the position of equilibrium when the load is removed;
(c)any indicator returns to the zero mark or given point when the load is removed.
(2) Sub-paragraphs (1)(a) and (c) above shall not apply in the case of a discontinuous totaliser of a pattern in respect of which a certificate of approval is in force, if, in the certificate of approval or the notice of examination in respect of that pattern, it is described as not being so constructed as to balance when unloaded.
Commencement Information
I4Sch. 2 para. 4 in force at 1.9.1986, see reg. 1
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys