- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
There are currently no known outstanding effects for the The Weighing Equipment (Automatic Rail-weighbridges) Regulations 2003, SCHEDULE 6.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
regulation 9(3)
The maximum permissible errors for weighing-in-motion shall be as specified in Table 1.
Accuracy class | Percentage of mass of single wagon or total train, as appropriate | |
---|---|---|
Initial verification | In-service | |
0.2 | ±0.10% | ±0.2% |
0.5 | ±0.25% | ±0.5% |
1 | ±0.50% | ±1.0% |
2 | ±1.00% | ±2.0% |
On initial verification of an automatic rail-weighbridge weighing coupled wagons, the errors of not more than 10% of the weighing results taken from one or more passes of the test train may exceed the appropriate maximum permissible error given in Table 1 but shall not exceed two times that value.
Wagon weighing (Clause 2.8.2.1 of Part 1 of OIML R 106)
The maximum permissible error for coupled or uncoupled wagon weighing, shall be one of the following values, whichever is greater:
• the value calculated according to Table 1, rounded to the nearest scale interval;
• the value calculated according to Table 1, rounded to the nearest scale interval for the weight of a single wagon equal to 35% of the maximum wagon weight (as inscribed on the descriptive markings), or
• 1 d.
Train weighing (Clause 2.8.2.2 of Part 1 of OIML R 106)
The maximum permissible error for train weighing shall be one of the following values, whichever is greater:
• the value calculated according to Table 1, rounded to the nearest scale interval;
• the value calculated according to Table 1, for the weight of a single wagon equal to 35% of the maximum wagon weight (as inscribed on the descriptive markings) multiplied by the number of reference wagons in the train (not exceeding 10 wagons) and rounded to the nearest scale interval, or
• 1 d for each wagon in the train but not exceeding 10 d.
The maximum permissible errors on static weighing for increasing or decreasing loads shall be the appropriate values in Table 2.
Maximum permissible errors | Load (m) expressed in numbers of scale intervals |
---|---|
±0.5d | 0 �?� m �?� 500 |
±1.0d | 500 < m �?� 2 000 |
±1.5d | 2 000 < m �?� 10 000 |
For a particular method of weighing-in-motion and combination of load receptors, all weight indicating and printing devices on an automatic rail-weighbridge shall have the same scale interval.
The relationship between the accuracy class, the scale interval and the maximum wagon weight divided by the scale interval shall be as specified in Table 3.
Accuracy class | D (kg) | (maximum wagon weight)/d | |
---|---|---|---|
minimum | maximum | ||
0.2 | �?� 50 | 1 000 | 5 000 |
0.5 | �?� 100 | 500 | 2 500 |
1 | �?� 200 | 250 | 1 250 |
2 | �?� 500 | 100 | 600 |
The scale intervals of the indicating or printing devices shall be in the form of 1 × 10k, 2 × 10k or 5 × 10k, “k” being a positive or a negative whole number or zero.
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys