6.—(1) Where, in the absence of specific provisions in [F1any relevant enactment] governing the safety of a product, the product conforms to the specific rules of [F2any other law] of part of the United Kingdom laying down the health and safety requirements which the product must satisfy in order to be marketed in the United Kingdom, the product shall be deemed safe so far as concerns the aspects covered by such rules.
(2) Where a product conforms to a [F3standard (“S”) which—
(a)is a voluntary national standard of the United Kingdom or a standard adopted by an international standardising body, and
(b)meets the conditions in paragraph (2A),
the product] shall be presumed to be a safe product so far as concerns the risks and categories of risk covered by that national standard. The Secretary of State shall publish the reference number of such national standards in such manner as he considers appropriate.
[F4(2A) The conditions referred to in paragraph (2) are that—
(a)the Secretary of State considers S appropriate for the purposes of giving rise to the presumption of conformity; and
(b)the Secretary of State has published the reference to S in a manner the Secretary of State considers appropriate.]
(3) In circumstances other than those referred to in paragraphs (1) and (2), the conformity of a product to the general safety requirement shall be assessed taking into account—
F5(a). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(b)F6... national standards drawn up in the United Kingdom,
(c)recommendations of the [F7Secretary of State] setting guidelines on product safety assessment,
(d)product safety codes of good practice in the sector concerned,
(e)the state of the art and technology, and
(f)reasonable consumer expectations concerning safety.
(4) Conformity of a product with the criteria designed to ensure the general safety requirement is complied with, in particular the provisions mentioned in paragraphs (1) to (3), shall not bar an enforcement authority from exercising its powers under these Regulations in relation to that product where there is evidence that, despite such conformity, it is dangerous.
[F8(5) In this regulation “international standardising body” has the same meaning as it has for the purposes of the Agreement on Technical Barriers to Trade, part of Annex 1A to the agreement establishing the World Trade Organisation signed at Marrakesh on 15 April 1994 (as modified from time to time).]
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Words in reg. 6(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 9 para. 4(2)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in reg. 6(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 9 para. 4(2)(b) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in reg. 6(2) substituted (E.W.S.) (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 2(a); S.I. 2020/1662, reg. 2(ee)
F4Reg. 6(2A) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 9 para. 4(4) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F5Reg. 6(3)(a) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 9 para. 4(5)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Word in reg. 6(3)(b) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 9 para. 4(5)(b) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F7Words in reg. 6(3)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 9 para. 4(5)(c) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F8Reg. 6(5) inserted (E.W.S.) (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 2(b); S.I. 2020/1662, reg. 2(ee)
6.—(1) Where, in the absence of specific provisions in [F9any NI Protocol obligation] governing the safety of a product, the product conforms to the specific rules of the law of part of the United Kingdom laying down the health and safety requirements which the product must satisfy in order to be marketed in the United Kingdom, the product shall be deemed safe so far as concerns the aspects covered by such rules.
(2) Where a product conforms to a voluntary national standard of the United Kingdom giving effect to a European standard the reference of which has been published in the Official Journal of the European Union in accordance with Article 4 of the GPS Directive, the product shall be presumed to be a safe product so far as concerns the risks and categories of risk covered by that national standard. The Secretary of State shall publish the reference number of such national standards in such manner as he considers appropriate.
(3) In circumstances other than those referred to in paragraphs (1) and (2), the conformity of a product to the general safety requirement shall be assessed taking into account—
(a)any voluntary national standard of the United Kingdom giving effect to a European standard, other than one referred to in paragraph (2),
(b)other national standards drawn up in the United Kingdom,
(c)recommendations of the European Commission setting guidelines on product safety assessment,
(d)product safety codes of good practice in the sector concerned,
(e)the state of the art and technology, and
(f)reasonable consumer expectations concerning safety.
(4) Conformity of a product with the criteria designed to ensure the general safety requirement is complied with, in particular the provisions mentioned in paragraphs (1) to (3), shall not bar an enforcement authority from exercising its powers under these Regulations in relation to that product where there is evidence that, despite such conformity, it is dangerous.
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F9Words in reg. 6(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 3 para. 1(4)