Chwilio Deddfwriaeth

The Natural Mineral Water, Spring Water and Bottled Drinking Water (England) Regulations 2007

 Help about what version

Pa Fersiwn

 Help about advanced features

Nodweddion Uwch

 Help about opening options

Dewisiadau AgorExpand opening options

Status:

Point in time view as at 09/04/2010.

Changes to legislation:

There are currently no known outstanding effects for the The Natural Mineral Water, Spring Water and Bottled Drinking Water (England) Regulations 2007. Help about Changes to Legislation

Regulations 2(1) and 16(2)

SCHEDULE 1E+W+SConditions for treatment of natural mineral waters and spring waters with ozone–enriched air

1.  Treatment of natural mineral waters and spring waters with ozone-enriched air shall only be carried out if—E+W+S

(a)it is for the purpose of separating compounds of iron, manganese, sulphur and arsenic from water in which they occur naturally at source;

(b)prior to treatment the requirements of paragraphs 3, 4 and 5 of Schedule 4 are satisfied; and

(c)the treatment does not have a disinfectant action.

2.  Treatment of natural mineral waters and spring waters with ozone–enriched air shall not—E+W+S

(a)modify the physico–chemical composition of the water in terms of its characteristic constituents; or

(b)leave residues in the water which could pose a risk to public health, or, in the case of the substances listed below, above the levels specified.

Treatment residueMaximum limit (µg/l)
Dissolved ozone50
Bromate3
Bromoform1

3.  A person seeking to have a treatment with ozone-enriched air authorised shall—E+W+S

(a)make application in writing to the relevant authority within whose area the water is extracted;

(b)permit representatives of that authority to examine the proposed method of treatment, and place of treatment, and take samples for analysis in accordance with regulation 17; and

(c)provide such information in support of the application as is requested by the relevant authority.

4.  The relevant authority shall assess the application and any information in its possession and shall authorise the treatment if it is satisfied that—E+W+S

(a)the treatment is justified by the composition of the water at source;

(b)the person carrying out the treatment is taking all necessary measures to ensure that the treatment is effective and safe; and

(c)the treatment otherwise complies with paragraphs 1 and 2.

5.  Where the relevant authority decides to authorise a treatment pursuant to paragraph 4, it shall inform the operator of the treatment in writing and state the date from which the authorisation for commercial use of the treatment has effect.E+W+S

6.  Where the relevant authority refuses to authorise a treatment pursuant to paragraph 4, it shall inform the operator of the treatment in writing, stating its reasons.E+W+S

7.  Where a treatment has been authorised pursuant to paragraph 4, the person carrying out the treatment must, for the purpose of enabling the relevant authority to assess whether the conditions in paragraph 4(a) and (b) continue to be satisfied—E+W+S

(a)permit representatives of the authority to examine the method of treatment and place of treatment and take samples for analysis in accordance with regulation 17; and

(b)provide such information related to the treatment as is requested by the authority.

8.  If the relevant authority is satisfied that the conditions specified in paragraph 4 are no longer fulfilled, it may withdraw authorisation of a treatment by giving the person operating that treatment a written notice stating the grounds for withdrawal.E+W+S

9.  Where the relevant authority has informed an operator under paragraph 6 of its refusal to authorise a treatment under paragraph 4 or withdraws authorisation of a treatment under paragraph 8, the person who wishes to carry out the treatment may apply to the Agency for a review of that decision.E+W+S

10.  Upon receiving the application for review, the Agency shall make such inquiry into the matter as may seem to the Agency to be appropriate and, having considered the results of that enquiry and any relevant facts elicited by it, shall either confirm the decision or direct the relevant authority to grant or restore, as appropriate, authorisation of the treatment process in operation. In the case of such a direction the relevant authority shall thereupon comply with the said direction.E+W+S

Regulations 2(1) and 16(3)

[F1SCHEDULE 1AE+W+SCONDITIONS FOR TREATMENT OF NATURAL MINERAL WATER AND SPRING WATER WITH ACTIVATED ALUMINA TO REMOVE FLUORIDE

1.  A person seeking to have authorised a treatment of natural mineral water and spring water with activated alumina in order to remove fluoride shall—E+W+S

(a)apply in writing to the relevant authority within whose area the water is extracted;

(b)permit representatives of that authority to examine the proposed method of treatment and place of treatment and take samples for analysis in accordance with regulation 17; and

(c)provide such information in support of the application as is requested by the relevant authority.

2.  The relevant authority shall assess the application and any information in its possession and shall authorise the treatment if it is satisfied that—E+W+S

(a)Articles 1 to 3 of Regulation 115/2010 are complied with in relation to the treatment; and

(b)the treatment does not have a disinfectant action.

3.  Where the relevant authority decides to authorise a treatment pursuant to paragraph 2, it shall inform the applicant in writing and state the date from which the authorisation for commercial use of the treatment has effect.E+W+S

4.  Where the relevant authority refuses to authorise a treatment pursuant to paragraph 2, it shall inform the applicant in writing, stating its reasons.E+W+S

5.  Where a treatment has been authorised pursuant to paragraph 2, the person carrying out the treatment must, for the purpose of enabling the relevant authority to assess whether the conditions in paragraph 2 continue to be satisfied—E+W+S

(a)permit representatives of the authority to examine the method of treatment and place of treatment and take samples for analysis in accordance with regulation 17; and

(b)provide such information related to the treatment as is requested by the authority.

6.  If the relevant authority is satisfied that the conditions specified in paragraph 2 are no longer fulfilled, it may withdraw authorisation of a treatment by giving the person carrying out the treatment a written notice stating the grounds for withdrawal.E+W+S

7.  Where the relevant authority has informed an applicant under paragraph 4 of its refusal to authorise a treatment under paragraph 2 or withdraws authorisation of a treatment under paragraph 6, the person who wishes to carry out the treatment may apply to the Agency for a review of that decision.E+W+S

8.  Upon receiving the application for review, the Agency shall —E+W+S

(a)make such enquiry into the matter as may seem to the Agency to be appropriate; and

(b)having considered the results of that enquiry and any relevant facts elicited by it, either confirm the decision or direct the relevant authority to grant or restore, as appropriate, authorisation of the treatment in respect of which the application was made.

9.  In the case of such a direction, the relevant authority shall comply with the direction.]E+W+S

Regulations 2(1), 10(1)(b),13, 19 and 21(2)

SCHEDULE 2E+W+SRequirements for spring water and drinking water including prescribed concentrations or values of parameters

PART 1E+W+SRequirements for spring water and drinking water

1.  Water satisfies the requirements of this Schedule if —E+W+S

(a)the water does not contain —

(i)any micro-organism (other than a parameter) or parasite, or

(ii)any property, element or substance (other than a parameter),

at a concentration or value which would constitute a potential danger to human health;

(b)the water does not contain any substance (whether or not a parameter) at a concentration or value which, in conjunction with any other property, element, substance or organism it contains (whether or not a parameter), would constitute a potential danger to human health;

(c)the water does not contain concentrations or values of any of the parameters listed in Tables A to D in Part 2 of this Schedule in excess of the prescribed concentrations or values; and

(d)in the case of water prepared from water which has been softened or desalinated, its hardness is not below a minimum concentration of 60 mg Ca/l.

2.  The concentrations or values of the parameters listed in Tables A to D in Part 2 of this Schedule shall be read in conjunction with the notes thereto.E+W+S

PART 2E+W+SPrescribed concentrations or values

Table A

Notes:

1.

The concentration (mg/l) of nitrate divided by 50 added to the concentration (mg/l) of nitrite divided by 3 must not exceed 1.

2.

Excluding tritium, potassium-40, radon and radon decay products.

Column 1ItemColumn 2ParametersColumn 3Units of MeasurementColumn 4Concentration or Value (maximum unless otherwise stated)
1.Colourmg/1 Pt/Co scale20
2.TurbidityNTU4
3.OdourDilution number3 at 25°C
4.TasteDilution number3 at 25°C
5.Sulphatemg SO4/1250
6.Sodiummg Na/l200
7.Nitratemg NO3/l50 (note 1)
8.Nitritemg NO2/l0.5 (note 1)
9.AluminiumµgAl/l200
10.Coppermg Cu/l2
11.Fluoridemg F/l1.5
12.Hydrogen ion concentrationpH units

4.5 (minimum)

9.5 (maximum)

13.Tritium (for radioactivity)Bq/l100
14.Total indicative dosemSv/year0.10 (note 2)
15.Manganeseµg Mn/l50

Table B

Notes:

1.

Pesticides” means: – organic insecticides, – organic herbicides, – organic fungicides, – organic nematocides, – organic acaricides, – organic algicides, – organic rodenticides, – organic slimicides, and related products (inter alia, growth regulators) and their relevant metabolites, degradation and reaction products.

Only those pesticides which are likely to be present in a given water need to be monitored.

2.

The maximum concentration applies to each individual pesticide. In the case of aldrin, dieldrin, heptaclor and heptachlor epoxide the maximum concentration is 0.030 µg/l.

3.

The maximum concentration for “total substances” refers to the sum of the concentrations of all individual pesticides detected and quantified in the monitoring procedure.

4.

The specified compounds are benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, indeno(1.2,3-cd) pyrene.

Column 1ItemColumn 2ParametersColumn 3Units of MeasurementColumn 4Maximum Concentration
1.Arsenicµg As/l10
2.Cadmiumµg Cd/l5
3.Cyanideµg CN/l50
4.Chromiumµg Cr/l50
5.Mercuryµg Hg/l1
6.Nickelµg Ni/l20
7.Seleniumµg Se/l10
8.Antimonyµg Sb/l5
9.Leadµg Pb/l10
10.Pesticides and related products:
- individual substancesµg/l0.10 (notes 1 and 2)
- total substancesµg/l0.50 (notes 1 and 3)
11.Polycyclic aromatic Hydrocarbonsµg/l0.1 sum of concentrations of specified compounds (note 4)
12.Bromateµg BrO3/l10

Table C

Notes:

1.

The total viable colony count should be measured within 12 hours of bottling, with the sample water being kept at a constant temperature during that 12 hour period. Any increase in the total viable colony count of the water between 12 hours after bottling and the time of sale should not be greater than that normally expected.

2.

In 72 hours on agar–agar or an agar–gelatine mixture.

3.

In 24 hours on agar–agar.

Column 1ItemColumn 2ParametersColumn 3Units of MeasurementColumn 4Maximum Concentration
1.

Escherichia coli

(E.coli)

number/250 ml0/250 ml
2.Enterococcinumber/250 ml0/250 ml
3.Colony count 22°Cnumber/ml100/ml (notes 1 and 2)
4.Colony count 37°Cnumber/ml20/ml (notes 1 and 3)
5.Pseudomonas aeruginosanumber/250/ml0/250 ml

Table D

Notes:

1.

The maximum concentration specified applies to the sum of the concentrations of the specified parameters.

2.

The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.

Column 1ItemColumn 2ParametersColumn 3Units of MeasurementColumn 4Maximum Concentration
1.Boronmg/l1.0
2.Benzo (a) pyreneµg/l0.010
3.Tetrachloroethene and Trichloroetheneµg/l10 (note 1)
4.Tetrachloromethaneµg/l3
5.Benzeneµg/l1.0
6.1,2-dichloroethaneµg/l3.0
7.Trichloromethane, Dichlororbromomethane, Dibromochloromethane and Tribromomethaneµg/l100 (note 1)
8.Epichlorohydrinµg/l0.10 (note 2)
9.Vinyl chlorideµg/l0.50 (note 2)
10.Acrylamideµg/l0.10 (note 2)

Regulations 4(1)(a) and (d)(i),(2)(a) and (c), (8) and (9) and16(1)(a)(iii)

SCHEDULE 3E+W+SRecognition of natural mineral waters

PART 1E+W+SNatural mineral waters extracted from the ground in England

1.  A person seeking to have water which is extracted from the ground in England recognised as a natural mineral water for the purposes of Article 1 shall make application in writing to the relevant authority within whose area the water is extracted, giving the particulars set out in paragraph 2.E+W+S

2.  The particulars are—E+W+S

(a)those specified in paragraph 1 of Part 3;

(b)any other information showing that the matters specified in paragraphs 2 and 3 of Part 3 are established; and

(c)such evidence as is satisfactory to show that the water contains no substance listed in Schedule 6 at a level which exceeds the maximum limit specified in relation to that substance in that Schedule.

3.  In so far as particulars of any of the anions, cations, non–ionised compounds or trace elements specified in column 1 of Schedule 5 are required to be given pursuant to sub–paragraph (b) of paragraph 2, the concentration of each such anion, cation, non–ionised compound or trace element shall be expressed in those particulars in the unit of measurement specified opposite to it in column 2 of that Schedule.E+W+S

4.  Where such particulars have been so given, the relevant authority shall assess them and shall recognise the water to which those particulars relate as natural mineral water if it is satisfied that—E+W+S

(a)the water is natural mineral water which complies with paragraph 3 of Section I of Annex I; and

(b)the characteristics of the water have been assessed in accordance with —

(i)the points numbered 1 to 4 set out in paragraph 2(a) of Section I of Annex I,

(ii)the requirements and criteria listed in Part 3 of this Schedule, and

(iii)recognised scientific methods.

5.  The relevant authority shall, on recognising a natural mineral water in accordance with paragraph 4, publish an announcement of such recognition and the grounds on which it has been granted in the London Gazette.E+W+S

PART 2E+W+SNatural mineral waters extracted from the ground in a country other than an EEA State

1.  A person seeking to have a water which is extracted from the ground in a country other than an EEA State recognised as a natural mineral water for the purposes of Article 1 shall make application in writing to the Agency, giving the particulars set out in paragraph 2.E+W+S

2.  The particulars are—E+W+S

(a)those specified in paragraph 1 of Part 3;

(b)any other information showing that the matters specified in paragraphs 2 and 3 of Part 3 are established; and

(c)such evidence as is satisfactory to show that the water contains no substance listed in Schedule 6 at a level which exceeds the maximum limit specified in relation to that substance in that Schedule.

3.  In so far as particulars of any of the anions, cations, non–ionised compounds or trace elements specified in column 1 of Schedule 5 are required to be given pursuant to sub-paragraph (b) of paragraph 2, the concentration of each such anion, cation, non–ionised compound or trace element shall be expressed in those particulars in the unit of measurement specified opposite to it in column 2 of that Schedule.E+W+S

4.  The Agency shall recognise such a water if the responsible authority of the country in which the water is extracted has certified that—E+W+S

(a)it is satisfied —

(i)that the requirements in paragraphs 2 and 3 of Part 3 are established, and

(ii)with the evidence given pursuant to sub–paragraph (c) of paragraph 2; and

(b)periodic checks are made to ascertain that—

(i)the water is natural mineral water which complies with paragraph 3 of Section I of Annex I,

(ii)the characteristics of the water are assessed in accordance with—

(aa)points numbered 1 to 4 set out in paragraph 2(a) of Section I of Annex I;

(bb)the requirements and criteria listed in Part 3; and

(cc)recognised scientific methods, and

(iii)the provisions of Schedule 4 are being applied by the person exploiting the spring.

5.  Recognition of such water shall lapse after a period of five years unless the responsible authority of the country in which the water is extracted has renewed the certification required by paragraph 4.E+W+S

6.  The Agency shall, on recognising water in accordance with this Part of this Schedule, publish an announcement of such recognition in the London Gazette, the Edinburgh Gazette and the Belfast Gazette.E+W+S

PART 3E+W+SRequirements and criteria for recognition as a natural mineral water

1.  Geological and hydrological surveys must include the following particulars—E+W+S

(a)the exact site of the catchment with an indication of its altitude, on a map with a scale of not more than 1:1,000;

(b)a detailed geological report on the origin and nature of the terrain;

(c)the stratigraphy of the hydrogeological layer;

(d)a description of the catchment operations; and

(e)the demarcation of the area or details of other measures protecting the spring against pollution.

2.  Physical, chemical and physico-chemical surveys must establish—E+W+S

(a)the rate of flow of the spring;

(b)the temperature of the water at source and the ambient temperature;

(c)the relationship between the nature of the terrain and the nature and type of minerals in the water;

(d)the dry residues at 180°C and 260°C;

(e)the electrical conductivity or resistivity, with the measurement temperature being specified;

(f)the hydrogen ion concentration (pH);

(g)the anions and cations;

(h)the non-ionised elements;

(i)the trace elements;

(j)the radio-actinological properties at source;

(k)where appropriate, the relative isotope levels of the constituent elements of water, oxygen (16O — 18O) and hydrogen (protium, deuterium, tritium); and

(l)the toxicity of certain constituent elements of the water, taking account of the limits laid down for each of them.

3.  Microbiological analysis at source must show—E+W+S

(a)the absence of parasites and pathogenic micro-organisms;

(b)quantitative determination of the revivable colony count indicative of faecal contamination, demonstrating—

(i)absence of Escherichiacoli and other coliforms in 250 ml at 37°C and 44.5°C,

(ii)absence of faecal streptococci in 250 ml,

(iii)absence of sporulated sulphite-reducing anaerobes in 50ml, and

(iv)absence of Pseudomonasaeruginosa in 250 ml; and

(c)the revivable total colony count per ml of water—

(i)at 20 to 22°C in 72 hours on agar-agar or an agar-gelatine mixture, and

(ii)at 37°C in 24 hours on agar-agar.

4.—(1) Subject to sub-paragraph (2), clinical and pharmacological analyses must be carried out in accordance with scientifically recognised methods and should be suited to the particular characteristics of the natural mineral water and its effects on the human organism, such as diuresis, gastric and intestinal functions, compensation for mineral deficiencies.E+W+S

(2) Clinical analyses may, in appropriate cases, take the place of analyses referred to in sub-paragraph (1), provided that the consistency and concordance of a substantial number of observations enable the same results to be obtained.

Regulations 4(2)(b), 5(1)(c) and (2),7(3), 9(2)(b), 10(1)(b) and (3) and16(1)(a)(iv) and paragraph 1(b) ofSchedule 1 and paragraph 4(b)(iii) of Part 2 of Schedule 3

SCHEDULE 4E+W+SExploitation and bottling requirements for natural mineral water and spring water

1.  Equipment for exploiting the water must be so installed as to avoid any possibility of contamination and to preserve the properties corresponding to those ascribed to it which the water possesses at source.E+W+S

2.  The spring or outlet must be protected against the risks of pollution.E+W+S

3.  The catchment, pipes and reservoirs must be of materials suitable for water and so built as to prevent any chemical, physico-chemical or microbiological alteration of the water.E+W+S

[F24.  The conditions of exploitation, particularly the washing and bottling equipment, must meet hygiene requirements. In particular, the containers must be so treated or manufactured as to avoid adverse effects on the microbiological and chemical characteristics of the water.]E+W+S

5.—(1) Subject to sub-paragraphs (2) and (3), water must not be transported in containers other than those authorised for distribution to the ultimate consumer.E+W+S

(2) Natural mineral water may be transported from the spring to the bottling plant in a container which is not for distribution to the ultimate consumer if on or before 17th July 1980 water from that spring was so transported.

[F3(3) Water distributed to the ultimate consumer in a bottle marked or labelled with the description “spring water” may be transported from the spring to the bottling plant in a container which is not for distribution to the ultimate consumer if, on or before 13th December 1996, water from that spring was so transported.]

6.—(1) The revivable total colony count of the water at source, determined according to sub-paragraph (2), shall conform to the normal viable colony count of that water and shall not show that the source of that water is contaminated.E+W+S

(2) The colony count is that determined per ml of water—

(a)at 20 to 22 oC in 72 hours on agar-agar or an agar-gelatine mixture; and

(b)at 37 oC in 24 hours on agar-agar.

7.—(1) After bottling, the total colony count of the water at source may not exceed—E+W+S

(a)100 per ml at 20 to 22 oC in 72 hours on agar-agar or an agar-gelatine mixture; and

(b)20 per ml at 37 oC in 24 hours on agar-agar.

(2) The total colony count shall be measured within the period of 12 hours following bottling, the water being maintained at 4 oC +/- 1 oC during the period before which it is measured.

[F48.  Both at source and during its marketing, water shall be free from—E+W+S

(a)parasites and pathogenic micro-organisms;

(b)Escherichia coli and other coliforms and faecal streptococci in any 250 ml sample examined;

(c)sporulated sulphite-reducing anaerobes in any 50 ml sample examined; and

(d)Pseudomonas aeruginosa in any 250 ml sample examined.]

Regulation 4(9) and paragraph 3 of Part 1 of Schedule 3

SCHEDULE 5E+W+SParticulars of anions, cations, non–ionised compounds and trace elements

AnionsUnit of measurement
Borate BO3mg/1
Carbonate CO32–mg/1
Chloride Clmg/1
Fluoride Fmg/l
Hydrogen Carbonate HCO3mg/1
Nitrate NO3mg/1
Nitrite NO2mg/1
Phosphate PO43–mg/1
Silicate SiO2mg/1
Sulphate SO42–mg/1
Sulphide S2–mg/1
CationsUnit of measurement
Aluminium A1mg/1
Ammonium NH4+mg/1
Calcium Camg/1
Magnesium Mgmg/1
Potassium Kmg/l
Sodium Namg/1
Non–ionised compoundsUnit of measurement
Total organic carbon Cmg/1
Free carbon dioxide CO2mg/1
Silica SiO2mg/1
Trace elementsUnit of measurement
Barium Baµg/l
Bromine (total) Brµg/l
Cobalt Coµg/l
Copper Cuµg/l
Iodine (total) Iµg/l
Iron Feµg/l
Lithium Liµg/l
Manganese Mnµg/l
Molybdenum Moµg/l
Strontium Srµg/l
Zinc Znµg/1

Regulation 7(1) and (2) andparagraph 2(c)of Part 1 of Schedule 3,paragraph 2(c) of Part 2 of Schedule 3and Notes 1 and 2 of Schedule 7

SCHEDULE 6E+W+SMaximum limits for constituents of natural mineral waters

Note:

The constituents described above refer to constituents naturally present in the water at source and not to substances present as the result of contamination.

ConstituentsMaximum limits (mg/l)
Antimony0.0050
Arsenic0.010 (as total)
Barium1.0
Cadmium0.003
Chromium0.050
Copper1.0
Cyanide0.070
Fluoride5.0
Lead0.010
Manganese0.50
Mercury0.0010
Nickel0.020
Nitrate50
Nitrite0.1
Selenium0.010

Regulation 7(2)

SCHEDULE 7E+W+SPerformance characteristics for analysing the constituents in Schedule 6

Notes:

1.

The method of analysis used to measure the concentration of the constituents in Schedule 6 shall be capable of measuring concentrations equal to the parametric value with the specified accuracy, precision and detection limits.

2.

Regardless of the sensitivity of the method of analysis, the result must be expressed to at least the same number of decimal places as the maximum limit set out in Schedule 6 for the particular constituent being analysed.

3.

Accuracy is the systematic error and represents the difference between the average value of a large number of repeated measurements and the exact value.

4.

Precision represents the random error and is expressed in general as the standard deviation (within a batch and between batches) of a sample of results from the average.

5.

Acceptable precision is equal to twice the relative standard deviation.

6.

The detection limit is—

(a)

three times the relative standard deviation within a batch of a natural sample containing a low concentration of the constituent; or

(b)

five times the relative standard deviation within a batch of a virgin sample.

7.

The method should make it possible to determine cyanide in all its forms.

ConstituentAccuracy of parametric value in %Precision of parametric valueDetection limit of parametric value in %
Antimony252525
Arsenic101010
Barium252525
Cadmium101010
Chromium101010
Copper101010
Cyanides101010
Fluoride101010
Lead101010
Manganese101010
Mercury201020
Nickel101010
Nitrate101010
Nitrite101010
Selenium101010

Regulation 8(1)(e)

SCHEDULE 8E+W+SLabelling indications for natural mineral water and criteria for use

IndicationCriteria
Low mineral contentMineral salt content, calculated as a fixed residue, not greater than 500 mg/l
Very low mineral contentMineral salt content, calculated as a fixed residue, not greater than 50 mg/l
Rich in mineral saltsMineral salt content. Calculated as a fixed residue, greater than 1500 mg/l
Contains bicarbonateBicarbonate content greater than 600 mg/l
Contains sulphateSulphate content greater than 200 mg/l
Contains chlorideChloride content greater than 200 mg/l
Contains calciumCalcium content greater than 150 mg/l
Contains magnesiumMagnesium content greater than 50 mg/l
Contains fluorideFluoride content greater than 1 mg/l
Contains ironBivalent iron content greater than 1 mg/l
AcidicFree carbon dioxide content greater than 250 mg/l
Contains sodiumSodium content greater than 200 mg/l
Suitable for a low-sodium dietSodium content less than 20 mg/l

Regulation 16(5)(a)(iii), (b)(ii) and (d)

[F5SCHEDULE 9 E+W+SPROPERTIES, ELEMENTS, SUBSTANCES AND ORGANISMS, NOT BEING PARAMETERS, WHOSE CONCENTRATION OR VALUE IN BOTTLED DRINKING WATER AND SPRING WATER MUST BE DETERMINED BY AUDIT MONITORING

Property, element, substance or organismConcentration or valueUnitNotes
Ammonium0,50mg/l
Chloride250mg/lNote 1
Clostridum perfringens (including spores)0

number/

100 ml

Note 2
Conductivity2500µS cm-1 at 20oCNote 1
Iron200µg/l
Oxidisability5,0mg/ l O2Note 3
Coliform bacteria0Number/250 ml
Total organic carbon (TOC)No abnormal changeNote 4
Note 1:The water should not be aggressive.
Note 2:This need not be measured unless the water originates from or is influenced by surface water.
Note 3:This need not be measured if the TOC is analysed.
Note 4:This need not be applied for supplies less than 10000 m3 per day.]

Regulation 16(5)(b) (i)

[F5SCHEDULE 10 E+W+SPARAMETERS , PROPERTIES, ELEMENTS, SUBSTANCES AND ORGANISMS IN RELATION TO WHICH CHECK MONITORING MUST BE CARRIED OUT

Aluminium (Note 1)
Ammonium
Colour
Conductivity
Clostridium perfringens (including spores) (Note 2)
Escherichia coli (E. Coli)
Hydrogen ion concentration
Iron (Note 1)
Nitrite (Note 3)
Odour
Pseudomonas aeruginosa
Taste
Colony count 22°C and 37°C
Coliform bacteria
Turbidity
Note 1:Necessary only when used as flocculant
Note 2:Necessary only if the water originates from or is influenced by surface water
Note 3:Necessary only when chloramination is used as a disinfectant]

Regulation 16(5)(c)

[F5SCHEDULE 11 E+W+SMINIMUM FREQUENCIES FOR SAMPLING AND ANALYSIS OF SPRING WATER AND BOTTLED DRINKING WATER

Minimum frequency of sampling and analysis for water put into bottles or

containers intended for sale

Volume of water produced for offering for sale in bottles or containers each day (1) m3Check monitoring number of samples per yearAudit monitoring number of samples per year
≤ 1011
> 10 ≤ 60121
> 601 for each 5 m3 and part thereof of the total volume1 for each 100 m3 and part thereof of the total volume
(1) The volumes are calculated as averages taken over a calendar year.]

Yn ôl i’r brig

Options/Help