- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (31/12/2020)
- Gwreiddiol (a wnaed Fel)
Version Superseded: 01/01/2023
Point in time view as at 31/12/2020.
There are currently no known outstanding effects for the The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009, PART 4.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
[F119.—(1) Regulations 19A to 19F apply to transportable pressure equipment within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2)(a) of that Directive [F2, subject to the modification in paragraph (1A)].
[F3(1A) The modification referred to in paragraph (1) is that the reference to “making it available on the market” in that article is to be read as a reference to making it available on the GB market, as defined by these Regulations.]
(2) For the avoidance of doubt, any reference in those regulations to a manufacturer, importer, distributor, owner or operator as “it” is not to be construed as excluding a natural person.
[F4(3) Where transportable pressure equipment has been—
(a)placed on the GB market by an importer; or
(b)made available on the GB market by a distributor
prior to IP completion day, references to those economic operators in the regulations identified in paragraph (4) include such economic operators established in a relevant territory.
(4) The regulations referred to in paragraph (3) are—
(a)in respect of an importer—
(i)regulation 19CA(1)(b) and (2)(a),
(ii)regulation 19D(3)(a) and (4)(a), and
(iii)regulation 19E(2)(a), and
(b)in respect of a distributor, regulation 19E(2)(a).]]
Textual Amendments
F1Reg. 19 substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 7(1)
F2Words in reg. 19(1) inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 8(2)
19A.—(1) A manufacturer, importer, distributor, owner or operator may only place or make available on the market, put into service or use equipment if it ensures that the equipment meets the requirements of the Dangerous Goods Directive.
(2) On receipt of a request from the Health and Safety Executive, a manufacturer, importer, distributor, owner or operator must identify to the Executive any manufacturer, importer, distributor or owner who has supplied it with, or to whom it has supplied, equipment over at least the previous 10 years.
(3) A request made pursuant to paragraph (2) must—
(a)be in writing; and
(b)contain a date by which a response is to be provided with that date being reasonable in all the circumstances.
(4) Paragraph (5) applies where a manufacturer, importer, distributor or owner provides to an operator information about equipment it has placed or made available on the market, or put into service.
[F6(5) The information must comply with—
(a)the Annexes in respect of UK TPE; or
(b)the Directives in respect of pi marked TPE.]
(6) This regulation does not apply to an owner who is a private individual using or intending to use equipment in the circumstances set out in article 8(4) of the Transportable Pressure Equipment Directive.]
Textual Amendments
F5Regs. 19A-19F inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 7(2)
19AA.—(1) A manufacturer of equipment to be placed on the GB market must comply with paragraph (2) or (3).
(2) Where it is intended that the equipment becomes UK TPE, the manufacturer must—
(a)ensure a conformity assessment is carried out by an appointed body;
(b)mark equipment in accordance with regulation 22B; and
(c)keep the technical documentation specified in—
(i)section 1.8.7 of ADR; or
(ii)section 1.8.7 of RID,
for the period specified in those Agreements.
(3) Where it is intended that the equipment becomes pi marked TPE, the manufacturer must—
(a)ensure a conformity assessment is carried out by a notified body;
(b)mark equipment in accordance with articles 14 and 15 of the Transportable Pressure Equipment Directive; and
(c)keep the technical documentation specified in the Dangerous Goods Directive for the period specified in that Directive.
Textual Amendments
19AB.—(1) This regulation applies to equipment bearing the UK TPE marking that a manufacturer has placed on the GB market.
(2) Where a manufacturer knows or has reason to believe that the equipment does not comply with regulation 19AA(2) or the Annexes, that manufacturer must—
(a)take immediate corrective measures to ensure that the equipment complies with—
(i)regulation 19AA(2); and
(ii)the Annexes;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
(3) Where a manufacturer considers that the equipment presents a risk, that manufacturer must immediately inform the GB competent authority and Northern Ireland competent authority of—
(a)the risk, including providing details of any non-compliance with regulation 19AA(2) or the Annexes; and
(b)any action taken in accordance with paragraph (2).
(4) A manufacturer must record—
(a)each instance of non-compliance with regulation 19AA(2) or the Annexes; and
(b)any corrective measure taken,
and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(5) On receipt of a reasoned request from the GB competent authority, a manufacturer must—
(a)provide that authority with all information and documents necessary to show that the equipment meets the requirements of—
(i)regulation 19AA(2); and
(ii)the Annexes; and
(b)cooperate with that authority in any action it takes to eliminate risks posed by that equipment.]
Textual Amendments
19B.—[F9(1) This regulation applies to equipment bearing the pi marking that a manufacturer has placed on the GB market.]
(2) Where a manufacturer knows or has reason to believe that equipment [F10bearing the pi marking that] it has placed on the market does not comply with the Directives, that manufacturer must—
(a)take immediate corrective measures to ensure that the equipment complies with the Directives;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
(3) Where a manufacturer considers that equipment it has placed on the market presents a risk, that manufacturer must immediately inform the TPED competent authority [F11for any relevant territory on which the equipment has been placed] of the risk, including providing details of any non-compliance with the Directives and any action taken in accordance with paragraph (2).
(4) A manufacturer must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(5) On receipt of a reasoned request from a TPED competent authority, a manufacturer must—
(a)provide that authority, in a language that it easily understands, all information and documents necessary to show that the equipment meets the requirements of the Directives; and
(b)cooperate with that authority in any action it takes to eliminate risks posed by that equipment.
F12(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .]
Textual Amendments
F5Regs. 19A-19F inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 7(2)
F8Words in reg. 19B heading inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 11(2)
F9Reg. 19B(1) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 11(3)
F10Words in reg. 19B(2) inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 11(4)
F11Words in reg. 19B(3) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 11(5)
F12Reg. 19B(6) omitted (31.12.2020) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 11(6)
19BA. Regulations 19AA to 19B apply to an importer or a distributor as if that person were a manufacturer where the importer or distributor—
(a)places equipment on the GB market under the importer or distributor’s own name or trademark; or
(b)modifies equipment already placed on the GB market in such a way that it may affect compliance—
(i)of UK TPE with these Regulations or the Annexes; or
(ii)of pi marked TPE with the Directives.
Textual Amendments
19BB.—(1) Before placing equipment on the GB market, an importer must ensure that—
(a)the equipment has been marked in accordance with—
(i)regulation 22B; or
(ii)articles 14 and 15 of the Transportable Pressure Equipment Directive;
(b)the manufacturer has complied with conformity assessment and drawn up the technical documentation in accordance with—
(i)the Annexes, in respect of UK TPE; or
(ii)the Dangerous Goods Directive, in respect of pi marked TPE; and
(c)the certificate of conformity for the equipment either contains the name and address of the importer or has this information attached to it.
(2) Where an importer considers that equipment presents a risk before it has been placed on the GB market, that importer must inform the manufacturer and the Health and Safety Executive of the risk.
Textual Amendments
19BC.—(1) This regulation applies to equipment bearing the UK TPE marking that an importer has placed on the GB market.
(2) The importer must ensure that—
(a)the conditions in which equipment under the responsibility of the importer is stored and transported do not jeopardise the equipment’s compliance with the Annexes; and
(b)the technical documentation specified in the Annexes is kept for the period set out in that Directive.
(3) Where an importer knows or has reason to believe that equipment it has placed on the GB market does not comply with—
(a)this regulation;
(b)regulation 19BB(1)(a)(i), (b)(i) or (c); or
(c)the Annexes,
that importer must act as required by paragraph (4).
(4) The actions required by paragraph (3) are to—
(a)take immediate corrective measures to ensure that the equipment complies with—
(i)this regulation;
(ii)regulation 19BB(1)(a)(i), (b)(i) or (c); and
(iii)the Annexes;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
(5) Where an importer considers that equipment it has placed on the GB market presents a risk, that importer must immediately inform the manufacturer, the GB competent authority and Northern Ireland competent authority of the risk, including details of any non-compliance with—
(a)this regulation;
(b)regulation 19BB(1)(a)(i), (b)(i) or (c); or
(c)the Annexes,
and any action taken in accordance with paragraph (4).
(6) An importer must record each instance of non-compliance with—
(a)this regulation;
(b)regulation 19BB(1)(a)(i), (b)(i) or (c); or
(c)the Annexes,
and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(7) On receipt of a reasoned request from the GB competent authority, an importer must—
(a)provide that authority with all information and documents necessary to show that the equipment meets the requirements of—
(i)this regulation;
(ii)regulation 19BB(1)(a)(i), (b)(i) or (c); and
(iii)the Annexes;
(b)cooperate with that authority in any action taken to eliminate risks posed by that equipment.]
Textual Amendments
19C.—[F15(A1) This regulation applies to equipment bearing the pi marking that a manufacturer has placed on the GB market.]
(1) An importer must ensure that—
F16(a). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F16(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F16(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(d)the conditions in which equipment under the responsibility of the importer is stored and transported do not jeopardise the equipment’s compliance with the Dangerous Goods Directive; and
(e)the technical documentation specified in the Dangerous Goods Directive is kept for the period set out in that Directive.
(2) Where an importer knows or has reason to believe that equipment it has placed on the market does not comply with the Directives, that importer must—
(a)take immediate corrective measures to ensure that the equipment complies with the Directives;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
F17(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) Where an importer considers that equipment it has placed on the market presents a risk, that importer must immediately inform the manufacturer and the TPED competent authority [F18for any relevant territory on which the equipment has been placed] of the risk, including details of any non-compliance with the Directives and any action taken in accordance with paragraph (2).
(5) An importer must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(6) On receipt of a reasoned request from a TPED competent authority, an importer must—
(a)provide that authority, in a language that it easily understands, all information and documents necessary to show that the equipment meets the requirements of the Directives; and
(b)cooperate with that authority in any action taken to eliminate risks posed by that equipment.]
Textual Amendments
F5Regs. 19A-19F inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 7(2)
F14Words in reg. 19C heading inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 13(2)
F15Reg. 19C(A1) inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 13(3)
F16Reg. 19C(1)(a)-(c) omitted (31.12.2020) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 13(4)
F17Reg. 19C(3) omitted (31.12.2020) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 13(5)
F18Words in reg. 19C(4) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 13(6)
19CA.—(1) Before making transportable pressure equipment available on the GB market, a distributor must ensure that—
(a)the equipment has been marked in accordance with—
(i)regulation 22B; or
(ii)articles 14 and 15 of the Transportable Pressure Equipment Directive; and
(b)the certificate of conformity for the equipment either contains the name and address of the importer or has this information attached to it.
(2) Where a distributor considers that equipment presents a risk before it has been made available on the GB market, that distributor must inform—
(a)the manufacturer or the importer; and
(b)the Health and Safety Executive
of the risk.
Textual Amendments
19CB.—(1) This regulation applies to equipment bearing the UK TPE marking that a distributor has made available on the GB market.
(2) The distributor must ensure that the conditions in which equipment under the responsibility of the distributor is stored and transported do not jeopardise the equipment’s compliance with the Annexes.
(3) Where a distributor knows or has reason to believe that equipment does not comply with—
(a)this regulation;
(b)regulation 19CA(1)(a)(i) or (b); or
(c)the Annexes,
that distributor must act as required by paragraph (4).
(4) The actions required by paragraph (3) are to—
(a)take immediate corrective measures to ensure that the equipment complies with—
(i)this regulation;
(ii)regulation 19CA(1)(a)(i) or (b); and
(iii)the Annexes;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
(5) Where a distributor considers that equipment it has made available on the GB market presents a risk, that distributor must immediately inform the manufacturer, the GB competent authority and Northern Ireland competent authority of the risk, including details of any non-compliance with—
(a)this regulation;
(b)regulation 19CA(1)(a)(i) or (b); or
(c)the Annexes,
and any action taken in accordance with paragraph (4).
(6) A distributor must record each instance of non-compliance with—
(a)this regulation;
(b)regulation 19CA(1)(a)(i) or (b); or
(c)the Annexes,
and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(7) On receipt of a reasoned request from the GB competent authority, a distributor must—
(a)provide that authority with all information and documents necessary to show that the equipment meets the requirements of—
(i)this regulation;
(ii)regulation 19CA(1)(a)(i) or (b); and
(iii)the Annexes;
(b)cooperate with that authority in any action taken to eliminate risks posed by that equipment.]
Textual Amendments
19D.—[F21(A1) This regulation applies to equipment bearing the pi marking that a distributor has made available on the GB market.]
[F22(1) A distributor must ensure that the conditions in which equipment under the responsibility of the distributor is stored and transported do not jeopardise the equipment’s compliance with the Directives.]
(2) Where a distributor knows or has reason to believe that equipment it made available on the market does not comply with the Directives, that distributor must—
(a)take immediate corrective measures to ensure that the equipment complies with the Directives;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
F23(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) Where a distributor considers that equipment it has made available on the market presents a risk, that distributor must immediately inform—
(a)the manufacturer or the importer; and
(b)the TPED competent authority [F24for any relevant territory on which the equipment has been made available],
of the risk, including details of any non-compliance with the Directives and any action taken in accordance with paragraph (2).
(5) A distributor must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(6) On receipt of a reasoned request from a TPED competent authority, a distributor must—
(a)provide that authority, in a language that it easily understands, all information and documents necessary to show that the equipment meets the requirements of the Directives; and
(b)cooperate with that authority in any action taken to eliminate risks posed by that equipment.]
Textual Amendments
F5Regs. 19A-19F inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 7(2)
F20Words in reg. 19D heading inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 15(2)
F21Reg. 19D(A1) inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 15(3)
F22Reg. 19D(1) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 15(4)
F23Reg. 19D(3) omitted (31.12.2020) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 15(5)
F24Words in reg. 19D(4)(b) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 15(6)
19E.—(1) An owner must ensure that equipment for which it is responsible is stored and transported in conditions that do not jeopardise the compliance of that equipment with the Dangerous Goods Directive.
(2) Where an owner considers that the owner’s equipment presents a risk, it must inform—
(a)the manufacturer, importer or distributor; and
(b)the Health and Safety Executive,
of the risk.
[F25(2A) An owner of UK TPE must record each instance of non-compliance with—
(a)this regulation;
(b)regulation 21A; or
(c)the Annexes,
and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.]
(3) An owner [F26of pi marked TPE] must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(4) This regulation does not apply to private individuals using or intending to use equipment in the circumstances set out in article 8(4) of the Transportable Pressure Equipment Directive.]
Textual Amendments
F5Regs. 19A-19F inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 7(2)
19F. Where an operator considers that equipment presents a risk, that operator must inform the owner and the Health and Safety Executive of the risk.]
Textual Amendments
F5Regs. 19A-19F inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 7(2)
[F2720.—[F28(1) Subject to paragraph (3), a manufacturer may appoint in writing a person established in a relevant territory (“an authorised representative”) to carry out some or all of the duties imposed on the manufacturer by—
(a)regulations 19A, 19AA and 19AB in respect of equipment that bears, or will bear, the UK TPE marking; or
(b)regulations 19A, 19AA and 19B in respect of equipment that bears, or will bear, the pi marking.]
(2) An appointment made in accordance with paragraph (1) must include at least the following duties—
(a)keeping technical documentation;
[F29(b)in respect of UK TPE—
(i)providing to the GB competent authority or Northern Ireland competent authority, in response to a reasoned request, the information and documents necessary to show that the equipment meets the requirements of these Regulations and the Annexes; and
(ii)cooperating with those competent authorities in any action they take to eliminate risks posed by the equipment; and
(c)in respect of pi marked TPE—
(i)providing to a TPED competent authority, in response to a reasoned request and in a language that it easily understands, the information and documents necessary to show that the equipment meets the requirements of the Directives; and
(ii)cooperating with that competent authority in any action they take to eliminate risks posed by the equipment.]
(3) An authorised representative must not be appointed to carry out duties imposed by regulation 19A(2), [F3019AA(2)(a), (2)(b), (3)(a) or (3)(b)].
(4) The name and address of the authorised representative must be included on the certificate of conformity.
[F31(5) An authorised representative must only provide information to an operator that complies with the requirements of—
(a)the Annexes in respect of UK TPE; or
(b)the Directives in respect of pi marked TPE.]]
Textual Amendments
F27Reg. 20 substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 8
F28Reg. 20(1) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 17(2)
F29Reg. 20(2)(b)(c) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 17(3)
F30Words in reg. 20(3) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 17(4)
F31Reg. 20(5) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 17(5)
20A.—(1) This regulation applies to transportable pressure equipment which does not bear the conformity markings provided for in—
(a)regulation 22B;
(b)the Transportable Pressure Equipment Directive; or
(c)Council Directive 1999/36/EC of 29 April 1999 on transportable pressure equipment,
for the purposes of reassessment of conformity.
(2) Equipment may be reassessed for conformity in accordance with this regulation.
(3) The equipment is to be—
(a)reassessed by a type A appointed body in accordance with the procedure set out in Annex III to the Transportable Pressure Equipment Directive, subject to the modifications in paragraph (6); and
(b)inspected by an appointed body appointed for periodic inspection of that equipment and marked in accordance with the requirements of regulation 22B.
(4) If a pressure receptacle has been manufactured in series to a design type for which a—
(a)type A notified body notified for; or
(b)type A appointed body appointed for
reassessment of conformity has issued a certificate of type reassessment, the reassessment of conformity may be undertaken by an appointed body appointed for periodic inspection of that pressure receptacle.
(5) In this regulation—
(a)“certificate of type reassessment” means a certificate issued in accordance with paragraph 6 of Annex III to the Transportable Pressure Equipment Directive, subject to the modifications in paragraph (6); and
(b)“type A appointed body” means an appointed body conforming to standard EN ISO/IEC 17020 type A as revised or reissued from time to time.
(6) The modifications referred to in paragraphs (3)(a) and (5)(a) apply to Annex III to the Transportable Pressure Equipment Directive and are that—
(a)any reference to “a notified body” is to be read as a reference to an appointed body;
(b)any reference to a “type A notified body” is to be read as a reference to a type A appointed body;
(c)any reference to “notified” is to be read as a reference to appointed;
(d)any reference to the “pi marking” is to be read as a reference to the UK TPE marking; and
(e)any reference to “Member States” is to be read as a reference to the GB competent authority.]
Textual Amendments
21.—(1) This regulation applies to [F34pi marked TPE] within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2) [F35(c)] of that Directive.
(2) Equipment may be reassessed for conformity in accordance with this regulation.
(3) The equipment is to be—
(a)reassessed by a [F36type A] notified body in accordance with the procedure set out in [F37Annex III] to the Transportable Pressure Equipment Directive; and
[F38(b)inspected by a notified body notified for periodic inspection of that equipment and marked in accordance with the requirements of articles 14 and 15 of that Directive.]
[F39(4) But if a pressure receptacle has been manufactured in series to a design type for which a type A notified body notified for reassessment of conformity has issued a certificate of type reassessment, the reassessment of conformity may be undertaken by a notified body notified for periodic inspection of that pressure receptacle.]
[F40(5) In this regulation—
(a)“certificate of type reassessment” means a certificate issued in accordance with paragraph 7 of Annex III to the Transportable Pressure Equipment Directive; and
(b)“type A notified body” means a notified body conforming to standard EN ISO/IEC 17020 type A as revised or reissued from time to time.]
Textual Amendments
F33Words in reg. 21 heading inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 19(2)
F34Words in reg. 21(1) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 19(3)
F35Word in reg. 21(1) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(2)
F36Words in reg. 21(3)(a) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(3)(a)
F37Words in reg. 21(3)(a) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(3)(b)
F38Reg. 21(3)(b) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(4)
F39Reg. 21(4) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(5)
F40Reg. 21(5) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(6)
21A.—(1) This regulation applies to UK TPE, for the purposes of its periodic inspections, intermediate inspections, exceptional checks and use.
(2) If the equipment bears the marking provided for in regulation 22B, it is to be subject to—
(a)periodic inspection; and
(b)if required by ADR or RID, intermediate inspection,
in accordance with the frequency identified as being applicable to that type of equipment in Chapter 6.2 of ADR or Chapter 6.2 of RID.
(3) The periodic inspection or, where necessary, intermediate inspection must be conducted by an appointed body.
(4) The date of the periodic inspection or intermediate inspection, must be marked on the equipment along with the identification number of the appointed body responsible for the inspection.]
Textual Amendments
22.—(1) This regulation applies to [F43pi marked TPE] within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2) [F44(b)] of that Directive.
(2) If the equipment bears a marking referred to in [F45articles 14 and 15] of the Transportable Pressure Equipment Directive F46..., it is to be subject to periodic inspection in accordance with the requirements of [F47the Dangerous Goods Directive].
F48(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) The marking requirements applicable to periodic inspections [F49of pi marked TPE] set out in [F50articles 14 and 15] of the Transportable Pressure Equipment Directive are to be complied with in relation to the equipment.
Textual Amendments
F42Words in reg. 22 heading inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 21(2)
F43Words in reg. 22(1) substituted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 21(3)
F44Word in reg. 22(1) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(2)
F45Words in reg. 22(2) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(3)(a)
F46Words in reg. 22(2) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(3)(b)
F47Words in reg. 22(2) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(3)(c)
F48Reg. 22(3) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(4)
F49Words in reg. 22(4) inserted (31.12.2020) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1111), regs. 1, 21(4)
F50Words in reg. 22(4) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(5)
22A.—(1) This regulation applies to equipment bearing the pi marking—
(a)that is due to be subject to a periodic or intermediate inspection in accordance with the requirements of the Dangerous Goods Directive;
(b)that will, following the inspection, not be used for carriage within the territory of an EU member State other than for the transport of dangerous goods between EU member States and non-member States, where that carriage—
(i)complies with the requirements of the ADR or RID, and
(ii)is not prohibited within the Annexes; and
(c)whose owner wishes it to be marked with the UK TPE marking.
(2) The inspection must be conducted by an appointed body.
(3) The equipment must be marked in accordance with regulation 22B and, adjacent to that marking, be marked with—
(a)the date of the periodic inspection or, where appropriate, the intermediate inspection, and
(b)the identification number of the appointed body responsible for the periodic or intermediate inspection.
Textual Amendments
22B.—(1) The Secretary of State must publish the form of the UK TPE marking as set out in Schedule 1A on the Gov.uk website (www.gov.uk).
(2) Schedule 1A (UK TPE marking) has effect.
(3) The UK TPE marking may not be affixed to a product unless these Regulations provide for its affixing.]
Textual Amendments
[F5223.—(1) No person is to affix a marking on transportable pressure equipment which is likely to mislead third parties with regard to the meaning of the graphics of—
(a)the UK TPE marking; or
(b)the pi marking.
(2) Any other marking may be affixed to transportable pressure equipment provided that the visibility and legibility of—
(a)the UK TPE marking; or
(b)the pi marking
is not reduced.]
Textual Amendments
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys