- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (01/07/2022)
- Gwreiddiol (a wnaed Fel)
Version Superseded: 17/07/2023
Point in time view as at 01/07/2022. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, Paragraph 7.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
7. In paragraph 5, “the 2020 Regulations” means the Hazardous Substances and Packaging (Legislative Functions and Amendment) (EU Exit) Regulations 2020.
No. | Application | Maximum quantity exempted (if any) | Corresponding EU exemption | Categories of EEE to which exemption applies | Expiry date or status |
---|---|---|---|---|---|
(1) OJ No L 326, 19.12.1969, p.36, as last amended by Council Directive 2006/96/EC (OJ No L 363, 20.12.2006, p.81). | |||||
(2) EUR 2016/1628. | |||||
1 | Mercury in single capped (compact) fluorescent lamps: | ||||
1.1 | For general lighting purposes < 30 W | 2.5 mg per burner | Annex 3, 1(a) | all categories | transitional case |
1.2 | For general lighting purposes ≥ 30 W and < 50 W | 3.5 mg per burner | Annex 3, 1(b) | all categories | transitional case |
1.3 | For general lighting purposes ≥ 50 W and < 150 W | 5 mg per burner | Annex 3, 1(c) | all categories | transitional case |
1.4 | For general lighting purposes ≥ 150 W | 15 mg per burner | Annex 3, 1(d) | all categories | transitional case |
1.5 | For general lighting purposes with circular or square structural shape and tube diameter ≤ 17 mm | 7 mg per burner | Annex 3, 1(e) | all categories | transitional case |
1.6 | For special purposes | 5 mg per burner | Annex 3, 1(f) | 1-7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
1.7 | For general lighting purposes < 30 W with a lifetime equal or above 20,000 h | 3.5 mg per burner | Annex 3, 1(g) | all categories | transitional case |
2 | Mercury in double-capped linear fluorescent lamps for general lighting purposes: | ||||
2.1 | Tri-band phosphor with normal lifetime (< 25,000 h) and a tube diameter < 9 mm (e.g. T2) | 4 mg per lamp | Annex 3, 2(a)(1) | all categories | transitional case |
2.2 | Tri-band phosphor with normal lifetime (< 25,000 h) and a tube diameter ≥ 9 mm and ≤ 17 mm (e.g. T5) | 3 mg per lamp | Annex 3, 2(a)(2) | all categories | transitional case |
2.3 | Tri-band phosphor with normal lifetime (< 25,000 h) and a tube diameter > 17 mm and ≤ 28 mm (e.g. T8) | 3.5 mg per lamp | Annex 3, 2(a)(3) | all categories | transitional case |
2.4 | Tri-band phosphor with normal lifetime (< 25,000 h) and a tube diameter > 28 mm (e.g. T12) | 3.5 mg per lamp | Annex 3, 2(a)(4) | all categories | transitional case |
2.5 | Tri-band phosphor with long lifetime (≥ 25,000 h) | 5 mg per lamp | Annex 3, 2(a)(5) | all categories | transitional case |
3 | Mercury in other fluorescent lamps: | ||||
3.1 | Non-linear tri-band phosphor lamps with tube diameter > 17 mm (e.g. T9). | 15 mg per lamp | Annex 3, 2(b)(3) | 1-7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
3.2 | Lamps for other general lighting and special purposes (e.g. induction lamps). | 15 mg per lamp | Annex 3, 2(b)(4) | 1-7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
4 | Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes: | ||||
4.1 | Short length (≤ 500 mm) | 3.5 mg per lamp | Annex 3, 3(a) | 1-7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
4.2 | Medium length (> 500 mm and ≤ 1500 mm) | 5 mg per lamp | Annex 3, 3(b) | 1-7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
4.3 | Long length (> 1500 mm) | 13 mg per lamp | Annex 3, 3(c) | 1-7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
5 | Mercury in other low pressure discharge lamps. | 15 mg per lamp | Annex 3, 4(a) | 1-7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
6 | Mercury in High Pressure Sodium (vapour) lamps for general lighting purposes in lamps with improved colour rendering index Ra > 60: | ||||
6.1 | P ≤ 155 W | 30 mg per burner | Annex 3, 4(b)-I | all categories | transitional case |
6.2 | 155 W < P ≤ 405 W | 40 mg per burner | Annex 3, 4(b)-II | all categories | transitional case |
6.3 | P > 405 W | 40 mg per burner | Annex 3, 4(b)-III | all categories | transitional case |
7 | Mercury in other High Pressure Sodium (vapour) lamps for general lighting purposes: | ||||
7.1 | P ≤ 155 W | 25 mg per burner | Annex 3, 4(c)-I | all categories | transitional case |
7.2 | 155 W < P ≤ 405 W | 30 mg per burner | Annex 3, 4(c)-II | all categories | transitional case |
7.3 | P > 405 W | 40 mg per burner | Annex 3, 4(c)-III | all categories | transitional case |
8 | Mercury in metal halide lamps. | Annex 3, 4(e) | 1–7, 10 | transitional case | |
8x, 9x | 21st July 2021 | ||||
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
9 | Mercury in other discharge lamps for special purposes not specifically mentioned in another entry in this Table. | Annex 3, 4(f) | 1-7, 8x, 9x, 10 | transitional case | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
10 | Lead in glass of cathode ray tubes. | Annex 3, 5(a) | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
11 | Lead in glass of fluorescent tubes. | 0.2% lead by weight | Annex 3, 5(b) | 1–7, 10 | transitional case |
8x, 9x | 21st July 2021 | ||||
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
12 | Lead as an alloying element in steel for machining purposes and in galvanised steel. | 0.35% lead by weight | Annex 3, 6(a) | 8, 9 | transitional case |
11 | 21st July 2024 | ||||
13 | Lead as an alloying element in steel for machining purposes. | 0.35% lead by weight | Annex 3, 6(a)-I | 1-7, 10 | transitional case |
14 | Lead as an alloying element in batch hot dip galvanised steel components. | 0.2% lead by weight | Annex 3, 6(a)-I | 1-7, 10 | transitional case |
15 | Lead as an alloying element in aluminium. | 0.4% lead by weight | Annex 3, 6(b) | 8, 9 | transitional case |
11 | 21st July 2024 | ||||
16 | Lead as an alloying element in aluminium, provided it stems from lead-bearing aluminium scrap recycling. | 0.4% lead by weight | Annex 3, 6(b)-I | 1-7, 10 | transitional case |
17 | Lead as an alloying element in aluminium for machining purposes. | 0.4% lead by weight | Annex 3, 6(b)-II | 1-7, 10 | transitional case |
18 | Copper alloy containing lead. | 4% lead by weight | Annex 3, 6(c) | 1-10 | transitional case |
11 | 21st July 2024 | ||||
19 | Lead in high melting temperature type solders, i.e. lead-based alloys containing 85% by weight or more lead. This entry does not apply to applications covered by entry 42. | Annex 3, 7(a) | 1-10 | transitional case | |
11 | 21st July 2024 | ||||
20 | Lead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signalling, transmission, and network management for telecommunications. | Annex 3, 7(b) | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
21 | Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound. This entry does not apply to applications covered by entry 49. | Annex 3, 7(c)-I | 1-10 | transitional case | |
11 | 21st July 2024 | ||||
22 | Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher. This entry does not apply to applications covered by entry 21 or 23. | Annex 3, 7(c)-II | 1 – 10 | transitional case | |
11 | 21st July 2024 | ||||
23 | Lead in PZT based dielectric ceramic materials for capacitors which are part of integrated circuits or discrete semiconductors. | Annex 3, 7(c)-IV | 1-7, 8x, 9x, 10 | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
24 | Cadmium and its compounds in electrical contacts. | Annex 3, 8(b) | 8, 9 | transitional case | |
11 | 21st July 2024 | ||||
25 | Cadmium and its compounds in electrical contacts used in: — circuit breakers, — thermal sensing controls, — thermal motor protectors (excluding hermetic thermal motor protectors), — AC switches rated at: (a) 6 A and more at 250 V AC and more, or (b) 12 A and more at 125 V AC and more, — DC switches rated at 20 A and more at 18 V DC and more, and — switches for use at voltage supply frequency ≥ 200 Hz. | Annex 3, 8(b)-I | 1-7, 10 | transitional case | |
26 | Hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0.75 % by weight in the cooling solution. | Annex 3, 9 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
27 | Lead in bearing shells and bushes for refrigerant-containing compressors for heating, ventilation, air conditioning and refrigeration (HVACR) applications. | Annex 3, 9(b) | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
28 | Lead in white glasses used for optical applications. | Annex 3, 13(a) | all categories | transitional case | |
29 | Cadmium and lead in filter glasses and glasses used for reflectance standards. | Annex 3, 13(b) | 8, 9, 11 | transitional case | |
30 | Lead in ion coloured optical filter glass types. | Annex 3, 13(b)-(I) | 1-7, 10 | transitional case | |
31 | Cadmium in striking optical filter glass types. | Annex 3, 13(b)-(II) | 1-7, 10 | transitional case | |
32 | Cadmium and lead in glazes used for reflectance standards. | Annex 3, 13(b)-(III) | 1-7, 10 | transitional case | |
33 | Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages. | Annex 3, 15 | 8, 9 | transitional case | |
11 | 21st July 2024 | ||||
34 | Lead in solders to complete a viable electrical connection between the semiconductor die and carrier within integrated circuit flip chip packages where at least one of the following criteria applies: — a semiconductor technology node of 90 nm or larger; — a single die of 300 mm² or larger in any semi-conductor technology node; — stacked die packages with die of 300 mm² or larger, or silicon interposers of 300mm2 or larger. | Annex 3, 15(a) | 1–7, 10 | transitional case | |
35 | Lead halide as radiant agent in high intensity discharge (HID) lamps used for professional reprography applications. | Annex 3, 17 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
36 | Lead as activator in the fluorescent powder of discharge lamps containing phosphors such as BSP (BaSi2O5:Pb) when used as sun tanning lamps. | 1% lead by weight or less | Annex 3, 18(b) | 1–7, 8x, 9x, 10 | transitional case |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
37 | Lead as activator in the fluorescent powder of discharge lamps containing phosphors such as BSP (BaSi2O5:Pb) when used in medical phototherapy equipment. This entry does not apply to applications covered by entry 88. | 1% lead by weight or less | Annex 3, 18(b)-I | 5, 8 | transitional case |
38 | Lead and cadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses. | Annex 3, 21 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
39 | Cadmium when used in colour printed glass to provide filtering functions, used as a component in lighting applications installed in displays and control panels of EEE. | Annex 3, 21(a) | 1–7, 10 | 21st July 2021 | |
40 | Cadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses. | Annex 3, 21(b) | 1–7, 10 | 21st July 2021 | |
41 | Lead in printing inks for the application of enamels on other than borosilicate glasses. | Annex 3, 21(c) | 1–7, 10 | 21st July 2021 | |
42 | Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors. | Annex 3, 24 | 1–10 | transitional case | |
11 | 21st July 2024 | ||||
43 | Lead oxide in surface conduction electron emitter displays (SED) used in structural elements, notably in the seal frit and frit ring. | Annex 3, 25 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
44 | Lead bound in crystal glass as defined in Annex I (Categories 1, 2, 3 and 4) of Council Directive 69/493/EEC(1). | Annex 3, 29 | 1–7, 10, 11 | transitional case | |
8x, 9x | 21st July 2021 | ||||
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
45 | Cadmium alloys as electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB (A) and more. | Annex 3, 30 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
46 | Lead in soldering materials in mercury free flat fluorescent lamps (which e.g. are used for liquid crystal displays, design or industrial lighting). | Annex 3, 31 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
47 | Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes. | Annex 3, 32 | 1–7, 8x, 9, 10 | transitional case | |
8iv | 21st July 2023 | ||||
11 | 21st July 2024 | ||||
48 | Lead in solders for the soldering of thin copper wires of 100 μm diameter and less in power transformers. | Annex 3, 33 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
49 | Lead in cermet-based trimmer potentiometer elements. | Annex 3, 34 | 1–10 | transitional case | |
11 | 21st July 2024 | ||||
50 | Lead in the plating layer of high voltage diodes on the basis of a zinc borate glass body. | Annex 3, 37 | 1–7, 8x, 9x, 10 | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
51 | Cadmium and cadmium oxide in thick film pastes used on aluminium bonded beryllium oxide. | Annex 3, 38 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind, 11 | 21st July 2024 | ||||
52 | Cadmium selenide in downshifting cadmium-based semiconductor nanocrystal quantum dots for use in display lighting applications (< 0.2 μg Cd per mm² of display screen area). | Annex 3, 39(a) | all categories | transitional case | |
53 | Lead in solders and termination finishes of electrical and electronic components and finishes of printed circuit boards used in ignition modules and other electrical and electronic engine control systems, which for technical reasons must be mounted directly on or in the crankcase or cylinder of hand-held combustion engines (category NRSh in Regulation (EU) 2016/1628 of the European Parliament and of the Council(2)). | Annex 3, 41 | 1–7, 10, 11 | 31st March 2022 | |
8x, 9x | 21st July 2021 | ||||
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
54 | Lead in bearings and bushes of diesel or gaseous fuel powered internal combustion engines applied in non-road professional use equipment: — with engine total displacement ≥ 15 litres; or — with engine total displacement < 15 litres and the engine is designed to operate in applications where the time between signal to start and full load is required to be less than 10 seconds; or regular maintenance is typically performed in a harsh and dirty outdoor environment, such as mining, construction, and agriculture applications. This entry does not apply to applications covered by entry 18. | Annex 3, 42 | 8x, 9x | transitional case | |
11 | 21st July 2024 | ||||
55 | Bis(2-ethylhexyl) phthalate in rubber components in engine systems, designed for use in equipment that is not intended solely for consumer use and provided that no plasticised material comes into contact with human mucous membranes or into prolonged contact with human skin. This entry applies where the concentration value of bis(2-ethylhexyl) phthalate does not exceed: 30 % by weight of the rubber for: gasket coatings; solid-rubber gaskets; or rubber components included in assemblies of at least three components using electrical, mechanical or hydraulic energy to do work, and attached to the engine. 10% by weight of the rubber for rubber-containing components not referred to in point (a). For the purposes of this entry, ‘prolonged contact with human skin’ means continuous contact of more than 10 minutes duration or intermittent contact over a period of 30 minutes, per day. | Annex 3, 43 | 9ind | 15th July 2023 | |
11 | 21st July 2024 | ||||
56 | Lead in solder of sensors, actuators, and engine control units of combustion engines within the scope of Regulation (EU) 2016/1628 of the European Parliament and of the Council, installed in equipment used at fixed positions while in operation which is designed for professionals, but also used by non-professional users. | Annex 3, 44 | 11 | 21st July 2024 | |
57 | Lead, cadmium and mercury in detectors for ionising radiation. | Annex 4, 1 | 8x, 9x, 9ind | transitional case | |
8iv | 21st July 2023 | ||||
58 | Lead bearings in X-ray tubes. | Annex 4, 2 | 8x, 9x | transitional case | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
59 | Lead in electromagnetic radiation amplification devices: micro-channel plate and capillary plate. | Annex 4, 3 | 8, 9 | transitional case | |
60 | Lead in glass frit of X-ray tubes and image intensifiers and lead in glass frit binder for assembly of gas lasers and for vacuum tubes that convert electromagnetic radiation into electrons. | Annex 4, 4 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
61 | Lead in shielding for ionising radiation. | Annex 4, 5 | 8x, 9 | transitional case | |
8iv | 21st July 2023 | ||||
62 | Lead in X-ray test objects. | Annex 4, 6 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
63 | Lead stearate X-ray diffraction crystals. | Annex 4, 7 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
64 | Radioactive cadmium isotope source for portable X-ray fluorescence spectrometers. | Annex 4, 8 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
65 | Lead and cadmium in ion selective electrodes including glass of pH electrodes. | Annex 4, 1a | 8x, 9 | transitional case | |
8iv | 21st July 2023 | ||||
66 | Lead anodes in electrochemical oxygen sensors. | Annex 4, 1b | 8x, 9 | transitional case | |
8iv | 21st July 2023 | ||||
67 | Lead, cadmium and mercury in infra-red light detectors. | Annex 4, 1c | 8, 9 | transitional case | |
68 | Mercury in reference electrodes: low chloride mercury chloride, mercury sulphate and mercury oxide. | Annex 4, 1d | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
69 | Cadmium in helium-cadmium lasers. | Annex 4, 9 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
70 | Lead and cadmium in atomic absorption spectroscopy lamps. | Annex 4, 10 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
71 | Lead in alloys as a superconductor and thermal conductor in MRI. | Annex 4, 11 | 8x, 9x | transitional case | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
72 | Lead and cadmium in metallic bonds creating superconducting magnetic circuits in MRI, SQUID, NMR (Nuclear Magnetic Resonance) or FTMS (Fourier Transform Mass Spectrometer) detectors. | Annex 4, 12 | 8x, 9 | transitional case | |
8iv | 30th June 2021 | ||||
73 | Lead in counterweights. | Annex 4, 13 | 8x, 9x | transitional case | |
38iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
74 | Lead in single crystal piezoelectric materials for ultrasonic transducers. | Annex 4, 14 | 8x, 9x | transitional case | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
75 | Lead in solders for bonding to ultrasonic transducers. | Annex 4, 15 | 8x, 9x | transitional case | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
76 | Mercury in very high accuracy capacitance and loss measurement bridges and in high frequency RF switches and relays in monitoring and control instruments. | 20mg of mercury per switch or relay | Annex 4, 16 | 8x, 9x | 21st July 2021 |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
77 | Lead in solders in portable emergency defibrillators. | Annex 4, 17 | 8x, 9x | transitional case | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
78 | Lead in solders of high performance infrared imaging modules to detect in the range 8-14 μm. | Annex 4, 18 | 8x, 9x | transitional case | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
79 | Lead in liquid crystal on silicon (LCoS) displays. | Annex 4, 19 | 8x, 9x | 21st July 2021 | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
80 | Cadmium in X-ray measurement filters. | Annex 4, 20 | 8x, 9x | transitional case | |
8iv | 21st July 2023 | ||||
9ind | 21st July 2024 | ||||
81 | Lead acetate marker for use in stereotactic head frames for use with CT and MRI and in positioning systems for gamma beam and particle therapy equipment. | Annex 4, 22 | 8, 9 | 30th June 2021 | |
82 | Lead as an alloying element for bearings and wear surfaces in medical equipment exposed to ionising radiation. | Annex 4, 23 | 8, 9 | 30th June 2021 | |
83 | Lead in the surface coatings of pin connector systems. requiring nonmagnetic connectors which are used durably at a temperature below –20 °C under normal operating and storage conditions. | Annex 4, 25 | 8, 9 | 30th June 2021 | |
84 | Lead in the following applications that are used durably at a temperature below –20 °C under normal operating and storage conditions: (c) solders on printed circuit boards; (d) termination coatings of electrical and electronic components and coatings of printed circuit boards; (e) solders for connecting wires and cables; (f) solders connecting transducers and sensors. Lead in solders of electrical connections to temperature measurement sensors in devices which are designed to be used periodically at temperatures below –150 °C. | Annex 4, 26 | 8x, 9 | transitional case | |
8iv | 30th June 2021 | ||||
85 | Lead in: — solders, — termination coatings of electrical and electronic components and printed circuit boards, — connections of electrical wires, shields and enclosed connectors, which are used in: (g) magnetic fields within the sphere of 1 m radius around the isocentre of the magnet in medical magnetic resonance imaging equipment, including patient monitors designed to be used within this sphere, or (h) magnetic fields within 1 m distance from the external surfaces of cyclotron magnets, magnets for beam transport and beam direction control applied for particle therapy. | Annex 4, 27 | 8, 9x | transitional case | |
86 | Lead in alloys, as a superconductor or thermal conductor, used in cryo-cooler cold heads and/or in cryo-cooled cold probes and/or in cryo-cooled equipotential bonding systems, in medical devices or in industrial monitoring and control instruments. | Annex 4, 29 | 8x | transitional case | |
8iv, 9ind | 30th June 2021 | ||||
87 | Lead, cadmium, hexavalent chromium, and polybrominated diphenyl ethers (PBDE) in spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, or electron microscopes and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer. | Annex 4, 31a | 8, 9x | transitional case | |
9ind | 21st July 2024 | ||||
88 | Lead as an activator in the fluorescent powder of discharge lamps when used for extracorporeal photopheresis lamps containing BSP (BaSi2O5:Pb) phosphors. | Annex 4, 34 | 8, 9 | 22nd July 2021 | |
89 | Mercury in cold cathode fluorescent lamps for back-lighting liquid crystal displays, not exceeding 5 mg per lamp, used in industrial monitoring and control instruments placed on the market before 22 July 2017. | Annex 4, 35 | 9ind | 21st July 2024 | |
90 | Lead in platinized platinum electrodes used for conductivity measurements where at least one of the following conditions applies: (i) wide-range measurements with a conductivity range covering more than 1 order of magnitude (e.g. range between 0.1 mS/m and 5 mS/m) in laboratory applications for unknown concentrations; (j) measurements of solutions where an accuracy of +/– 1 % of the sample range and where high corrosion resistance of the electrode are required for any of the following: (i) solutions with an acidity < pH 1; (ii) solutions with an alkalinity > pH 13; (iii) corrosive solutions containing halogen gas; (k) measurements of conductivities above 100 mS/m that must be performed with portable instruments. | Annex 4, 37 | 8, 9 | 31st December 2025 | |
91 | Lead in micro-channel plates (MCPs) used in equipment where at least one of the following properties is present: (l) a compact size of the detector for electrons or ions, where the space for the detector is limited to a maximum of 3 mm/MCP (detector thickness + space for installation of the MCP), a maximum of 6 mm in total, and an alternative design yielding more space for the detector is scientifically and technically impracticable; (m) a two-dimensional spatial resolution for detecting electrons or ions, where at least one of the following applies: (i) a response time shorter than 25 ns; (ii) a sample detection area larger than 149 mm² ; (iii) a multiplication factor larger than 1.3 × 10³ . (n) a response time shorter than 5 ns for detecting electrons or ions; (o) a sample detection area larger than 314 mm² for detecting electrons or ions; (p) a multiplication factor larger than 4.0 × 107. | Annex 4, 39 | 8, 9 | transitional case | |
92 | Lead as a thermal stabiliser in polyvinyl chloride (PVC) used as base material in amperometric, potentiometric and conductometric electrochemical sensors which are used in in-vitro diagnostic medical devices for the analysis of blood and other body fluids and body gases. | Annex 4, 41 | 8iv | 31st March 2022 | |
93 | Mercury in electric rotating connectors used in intravascular ultrasound imaging systems capable of high operating frequency (> 50 MHz) modes of operation. | Annex 4, 42 | 8x, 9x | [F230th June 2026] | |
94 | Cadmium anodes in Hersch cells for oxygen sensors used in industrial monitoring and control instruments, where sensitivity below 10 ppm is required. | Annex 4, 43 | 9ind | 15th July 2023 | |
95 | Cadmium in radiation tolerant video camera tubes designed for cameras with a centre resolution greater than 450 TV lines which are used in environments with ionising radiation exposure exceeding 100 Gy/hour and a total dose in excess of 100kGy. | Annex 4, 44 | 8x, 9 | 31st March 2027 | |
[F396 | Lead diazide, lead styphnate, lead dipicramate, orange lead (lead tetroxide), lead dioxide in electric and electronic initiators of explosives for civil (professional) use and barium chromate in long time pyrotechnic delay charges of electric initiators of explosives for civil (professional) use | Annex 3, 45 | 11 | 20th April 2026] | |
[F497 | Bis(2-ethylhexyl) phthalate (DEHP) in ion selective electrodes applied in point of care analysis of ionic substances present in human body fluids and/or in dialysate fluids. | Annex 4, 45 | 8 | 21st July 2028 | |
98 | Bis(2-ethylhexyl) phthalate (DEHP) in plastic components in magnetic resonance imaging (MRI) detector coils. | Annex 4, 46 | 8 | 1st January 2024 | |
99 | Bis(2-ethylhexyl) phthalate (DEHP), butyl benzyl phthalate (BBP), and diisobutyl phthalate (DIBP) in spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer. | Annex 4, 47 | 8 | 21st July 2028] |
No. | Application | Categories of EEE to which exemption applies |
---|---|---|
1 | Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC, where used in spare parts for EEE placed on the market before 1st January 2013. | all categories |
2 | Cadmium and its compounds in one shot pellet type thermal cut-offs, where used in spare parts for EEE placed on the market before 1st January 2012. | all categories |
3 | Lead used in C-press compliant pin connector systems, where used in spare parts for EEE placed on the market before 24th September 2010. | all categories |
4 | Lead used in other than C-press compliant pin connector systems, where used in spare parts for EEE placed on the market before 1st January 2013. | all categories |
5 | Lead as a coating material for the thermal conduction module C-ring, where used in spare parts for EEE placed on the market before 24th September 2010. | all categories |
6 | Lead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors with a lead content of more than 80% and less than 85% by weight, where used in spare parts for EEE placed on the market before 1st January 2011. | all categories |
7 | Lead in finishes of fine pitch components other than connectors with a pitch of 0.65 mm and less, where used in spare parts for EEE placed on the market before 24th September 2010. | all categories |
8 | Cadmium in phosphor coatings in image intensifiers for X-ray images, in spare parts for X-ray systems placed on the market before 1st January 2020. | 8, 9 |
9 | Hexavalent chromium in alkali dispensers used to create photocathodes in X-ray image intensifiers, where used in spare parts for X-ray systems placed on the market before 1st January 2020. | 8, 9 |
10 | Lead used in other than C-press compliant pin connector systems, where used in spare parts for industrial monitoring and control instruments placed on the market before 1st January 2021. | 9ind |
11 | Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC, where used in spare parts for industrial monitoring and control instruments placed on the market before 1st January 2021. | 9ind] |
Textual Amendments
F1Sch. A2 inserted (E.W.S.) (31.12.2020) by The Hazardous Substances and Packaging (Legislative Functions and Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1647), reg. 1(3), Sch. 2
F2Words in Sch. A2 Table 1 substituted (1.1.2022) by The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2021 (S.I. 2021/1395), regs. 1(2), 2(3)(a)
F3Words in Sch. A2 Table 1 inserted (1.1.2022) by The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2021 (S.I. 2021/1395), regs. 1(2), 2(3)(b)
F4Words in Sch. A2 Table 1 inserted (1.7.2022) by The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Amendment) Regulations 2022 (S.I. 2022/622), regs. 1(2), 2(2)(c)
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys