- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
There are multiple versions of this provision on screen. These apply to different geographical extents.
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
There are currently no known outstanding effects for the The Veterinary Medicines Regulations 2013, Paragraph 11.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
11.—(1) The qualified person (manufacture) must ensure that each batch of veterinary medicinal product manufactured under that person’s responsibility is manufactured and checked in compliance with these Regulations and in accordance with the data submitted in support of the application for the marketing authorisation.
(2) If a manufacturer imports a veterinary medicinal product from [F1another] country,F2..., the qualified person (manufacture) must ensure that, following importation, each production batch imported is fully tested F3..., including a full qualitative analysis, a quantitative analysis of at least all the active substances and all the other tests or controls necessary to ensure the quality of a veterinary medicinal product is in accordance with the requirements of the marketing authorisation.
(3) Sub-paragraph (2) does not apply [F4where the exporting country has demonstrated equivalent standards to those of the United Kingdom or ] where appropriate arrangements have been made F5...with the exporting country to ensure that the manufacturer of the veterinary medicinal product applies standards of good manufacturing practice at least equivalent to those laid down in Commission Directive 91/412/EEC and to ensure that the controls in sub‑paragraph (2) have been carried out in the exporting country.
(4) At each stage of manufacture, including release for sale, the qualified person (manufacture) must certify in writing that all control tests required under the marketing authorisation have been carried out, and that the production batch complies with the marketing authorisation.
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Word in Sch. 2 para. 11(2) substituted (E.W.S.) (31.12.2020) by The Veterinary Medicines and Animals and Animal Products (Examination of Residues and Maximum Residue Limits) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/676), regs. 1(2)(b), 3(33)(b)(i) (as amended by S.I. 2020/1461, regs. 1(2)(a), 3(2)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in Sch. 2 para. 11(2) omitted (E.W.S.) (31.12.2020) by virtue of The Veterinary Medicines and Animals and Animal Products (Examination of Residues and Maximum Residue Limits) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/676), regs. 1(2)(b), 3(33)(b)(ii) (as amended by S.I. 2020/1461, regs. 1(2)(a), 3(2)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in Sch. 2 para. 11(2) omitted (E.W.S.) (31.12.2020) by virtue of The Veterinary Medicines and Animals and Animal Products (Examination of Residues and Maximum Residue Limits) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/676), regs. 1(2)(b), 3(33)(b)(iii) (as amended by S.I. 2020/1461, regs. 1(2)(a), 3(2)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in Sch. 2 para. 11(3) inserted (E.W.S.) (31.12.2020) by The Veterinary Medicines and Animals and Animal Products (Examination of Residues and Maximum Residue Limits) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/676), regs. 1(2)(b), 3(33)(c)(i) (as amended by S.I. 2020/1461, regs. 1(2)(a), 3(2)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F5Words in Sch. 2 para. 11(3) omitted (E.W.S.) (31.12.2020) by virtue of The Veterinary Medicines and Animals and Animal Products (Examination of Residues and Maximum Residue Limits) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/676), regs. 1(2)(b), 3(33)(c)(ii) (as amended by S.I. 2020/1461, regs. 1(2)(a), 3(2)(b)); 2020 c. 1, Sch. 5 para. 1(1)
11.—(1) The qualified person (manufacture) must ensure that each batch of veterinary medicinal product manufactured under that person’s responsibility is manufactured and checked in compliance with these Regulations and in accordance with the data submitted in support of the application for the marketing authorisation.
(2) If a manufacturer imports a veterinary medicinal product from a third country, including a product manufactured in a member State, the qualified person (manufacture) must ensure that, following importation, each production batch imported is fully tested in a member State, including a full qualitative analysis, a quantitative analysis of at least all the active substances and all the other tests or controls necessary to ensure the quality of a veterinary medicinal product is in accordance with the requirements of the marketing authorisation.
(3) Sub-paragraph (2) does not apply where appropriate arrangements have been made by the European Union with the exporting country to ensure that the manufacturer of the veterinary medicinal product applies standards of good manufacturing practice at least equivalent to those laid down in Commission Directive 91/412/EEC and to ensure that the controls in sub‑paragraph (2) have been carried out in the exporting country.
(4) At each stage of manufacture, including release for sale, the qualified person (manufacture) must certify in writing that all control tests required under the marketing authorisation have been carried out, and that the production batch complies with the marketing authorisation.
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
Yr Offeryn Cyfan you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys