- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol). This item of legislation is currently only available in its original format.
3. A plant which is a biomass plant, heat pump or solar thermal plant is eligible for accreditation where it meets the requirements (“the eligibility criteria”) set out in—
(a)regulation 4, 5, or 6 (whichever is applicable to the plant);
(c)if the plant is not the first and only plant to provide heat to a property, regulation 12; and
(d)if regulation 13 requires that the heat generated by the plant must be metered, regulation 14.
4.—(1) Where the plant is a biomass plant, the applicable requirements referred to in regulation 3(a) are that—
(a)where—
(i)the plant is designed and installed to use both a permitted source of energy and another source of energy; and
(ii)that other source of energy is not used solely for ignition,
paragraph (2) is satisfied in respect of any part of the plant which uses that other source of energy (“the non-biomass part”);
(b)it provides heating—
(i)solely to a single eligible property;
(ii)for an eligible purpose; and
(iii)if the plant is a biomass stove, it provides heating for that eligible purpose using a liquid-filled heat exchanger enclosed within it;
(c)it is a condensing plant or meets the requirements set out in—
(i)at least one of the standards specified in paragraph 1(2) of Schedule 1 which is relevant to the plant and which is applicable on the plant’s first commissioning date, if the plant is a biomass boiler; or
(ii)the standard specified in paragraph 1(3) of Schedule 1, if the plant is a biomass stove; and
(d)it has a first commissioning date which is—
(i)earlier than the relevant date; or
(ii)on or after the relevant date and an RHI emissions certificate has been issued for the plant, a plant of the same make, model and installation capacity as the plant, or any other plant in the same type-testing range as the plant.
(2) For the purposes of paragraph (1)(a), this paragraph is satisfied where the non-biomass part—
(a)comprises an immersion heater for a domestic hot water cylinder or otherwise solely generates heat for the purpose of heating domestic hot water; or
(b)comprises a supplementary electric heater and a single control system governs the whole plant.
(3) In paragraph (1), “permitted source of energy” means, if the source of energy is used by—
(a)a biomass boiler, solid biomass; and
(b)a biomass stove, wood pellets.
(4) Schedules 2 and 3 have effect.
5. Where the plant is a heat pump, the applicable requirements referred to in regulation 3(a) are that—
(a)it provides heating—
(i)solely to a single eligible property; and
(ii)for an eligible purpose using liquid as a medium for delivering that heat;
(b)it meets the requirements set out in the standards for heat pumps specified in paragraph 1(4)(a), (b), (c) or (d) of Schedule 1 which are applicable on the plant’s first commissioning date;
(c)it has a seasonal performance factor of 2.5 or above;
(d)it uses a compressor which is driven by electricity; and
(e)if it is an air source heat pump, it is not designed to use heat in air which has been expelled from an appliance or building.
6. Where the plant is a solar thermal plant, the applicable requirements referred to in regulation 3(a) are that it—
(a)is designed and installed to provide heating solely to a single eligible property and solely for an eligible purpose using liquid as a medium for delivering that heat;
(b)meets the requirements set out in whichever of the standards for solar thermal plants specified in paragraph 1(5)(a) and (b) of Schedule 1 are relevant to the plant and are applicable on the plant’s first commissioning date;
(c)cannot also be used to generate electricity.
7. The requirements referred to in regulation 3(b) are that, on the RHI date for the plant, all parts of the plant have the same first commissioning date and that date is on or after 15th July 2009.
8.—(1) The requirements referred to in regulation 3(b) are that the plant is certified under—
(a)the Microgeneration Certification Scheme(1) as installed in accordance with the relevant installation standard in that scheme; or
(b)a scheme accredited under EN 45011(2) or EN ISO/IEC 17065:2012(3) as installed in accordance with the installation requirements applicable to the plant which apply under that scheme where—
(i)that scheme is equivalent to the Microgeneration Certification Scheme; and
(ii)the requirements are those which apply on the plant’s first commissioning date and which are equivalent to the relevant installation standard.
(2) In paragraph (1), “relevant installation standard” means, if the first commissioning date for the plant is—
(a)on or after the relevant date—
(i)where the plant is a biomass plant, version 4.0 of the document entitled “Microgeneration Installation Standard: MIS 3004 requirements for contractors undertaking the supply, design, installation, set to work, commissioning and handover of solid biofuel heating systems” published on 16th December 2013(4);
(ii)where the plant is a heat pump, version 4.0 of the document entitled “Microgeneration Installation Standard: MIS 3005 requirements for contractors undertaking the supply, design, installation, set to work, commissioning and handover of microgeneration heat pump systems” published on 16th December 2013(5); or
(iii)where the plant is a solar thermal plant, version 4.0 of the document entitled “Microgeneration Installation Standard: MIS 3001 requirements for contractors undertaking the supply, design, installation, set to work, commissioning and handover of solar heating microgeneration systems” published on 16th December 2013(6); or
(b)earlier than the relevant date, any installation requirements applicable to the plant under the Microgeneration Certification Scheme on the first commissioning date.
9.—(1) The requirements referred to in regulation 3(b) are that no part of the plant which generates heat, other than any of the components listed in paragraph (2), was used before the plant’s first commissioning date.
(2) The components referred to in paragraph (1) are—
(a)immersion heaters and other components which solely generate heat for the purpose of heating domestic hot water;
(b)supplementary electric heaters; and
(c)circulation pumps.
10. The requirements referred to in regulation 3(b) are that—
(a)some or all of the costs of the purchase or installation of the plant are met by any owner or former owner of the plant using that person’s own funds (including a loan which that person was liable to repay or a Green Deal Plan for which that person is liable to make, or has made, payments); or
(b)the plant is owned by a local authority.
11. The requirements referred to in regulation 3(b) are that the plant is not, and has not been at any time, an accredited RHI installation.
12.—(1) The requirements referred to in regulation 3(c) are that where the plant (“plant A”) provides heat to a property to which any other plant provides heat or has previously provided heat, in relation to that other plant, or if there is more than one in relation to each such plant, (“plant B”),—
(a)paragraph (2) or (3) applies; and
(b)paragraph (4) applies.
(2) This paragraph applies if plant B—
(a)is not, and has not at any time been, an accredited domestic plant; and
(b)is not a plant for which an accreditation application has been made and has not been rejected.
(3) This paragraph applies if plant B is, or has previously been, an accredited domestic plant and—
(a)either plant A or plant B (but not both) is a solar thermal plant; or
(b)plant B is an original plant and plant A is a replacement plant.
(4) This paragraph applies if plant B—
(a)is not, and has not at any time been, an accredited RHI installation; and
(b)is not a plant for which an application for accreditation has been made and not withdrawn by the applicant (and accreditation has not been refused) under the Renewable Heat Incentive Scheme Regulations 2011(7).
13.—(1) The heat generated by the plant (“plant A”) must be metered if—
(a)plant A is not a solar thermal plant; and
(b)plant A falls within paragraph (2), (3), (4) or (5).
(2) Plant A falls within this paragraph where it provides heat to the same property as another plant (“plant B”), except where plant B—
(a)is a solar thermal plant;
(b)is designed and installed to heat only one room;
(c)captures heat from air which is expelled from a property and transfers that heat into fresh air entering that property without generating additional heat;
(d)is an immersion heater for a domestic hot water cylinder or is any other plant which solely generates heat for the purpose of heating domestic hot water; or
(e)is a supplementary electric heater which is controlled by the same control system as the control system governing plant A.
(3) Plant A falls within this paragraph where it is a biomass plant with an installation capacity which is not sufficient to provide space heating for all parts of the property to which it provides heat and its first commissioning date is on or after the relevant date.
(4) Plant A falls within this paragraph where the property to which it provides heat was occupied for less than 183 days in the 12 month period ending on its RHI date.
(5) Plant A falls within this paragraph where it is a heat pump and is capable of using a fuel when generating heat for an eligible purpose.
14.—(1) The requirements referred to in regulation 3(d) are that, in relation to all eligible meters used in relation to the plant—
(a)the requirements set out in paragraph (2) are met (“the metering requirements”); or
(b)the metering requirements in paragraph (2)(a) are met and the Authority is satisfied that, were the plant given accreditation, no participant would, as a consequence of the failure to meet the other metering requirements, be entitled to receive RHI payments which are materially greater than would be the case were all the metering requirements met.
(2) The requirements referred to in paragraph (1)(a) are that—
(a)a certified installer was responsible—
(i)for the installation of any eligible meter installed before, on or after the relevant date; or
(ii)in the case of any eligible meter installed before the relevant date, for checking that it was properly installed;
(b)each eligible meter—
(i)is positioned in accordance with the requirements specified in regulation 15 if the plant is a biomass plant or regulation 16 if the plant is a heat pump;
(ii)is properly calibrated;
(iii)is properly installed and in good working order; and
(iv)bears a label which identifies the meter using a unique reference number which enables the meter to be consistently identified when the information recorded by the meter is submitted to the Authority.
15.—(1) For the purposes of regulation 14(2)(b), where the plant (“plant A”) is a biomass plant, meters must be positioned in accordance with paragraph (2), (3) or (4).
(2) Meters are positioned in accordance with this paragraph if one or more eligible heat meters are installed to record the heat output delivered by a liquid from plant A.
(3) Meters are positioned in accordance with this paragraph if one or more eligible heat meters are installed to record separately—
(a)the combined heat output of plant A and any other plant (“plant B”); and
(b)the heat output of plant B.
(4) Meters are positioned in accordance with this paragraph if one or more eligible meters are installed to record separately—
(a)the combined heat output of plant A and plant B; and
(b)any energy consumption by plant B.
16.—(1) For the purposes of regulation 14(2)(b), where the plant (“plant A”) is a heat pump, meters must be positioned in accordance with paragraph (2), (3), (4), or (5).
(2) Meters are positioned in accordance with this paragraph if one or more eligible meters are installed to record separately—
(a)the heat output from any component of plant A which is a compressor, and any other components of plant A which the owner of plant A will be seeking to be included in the calculation of eligible metered heat (“the metered components”); and
(b)any relevant energy consumption by the components of plant A that are metered under this paragraph.
(3) Meters are positioned in accordance with this paragraph if one or more eligible meters are installed to record separately—
(a)the combined heat output of the metered components and any other plant (“plant B”);
(b)the heat output of plant B; and
(c)any relevant energy consumption by the metered components.
(4) Meters are positioned in accordance with this paragraph if one or more eligible meters are installed to record separately—
(a)the combined heat output of the metered components and plant B;
(b)any energy consumption by plant B; and
(c)any relevant energy consumption by the metered components.
(5) Meters are positioned in accordance with this paragraph if plant A is capable of providing heating as well as cooling and one or more eligible meters are installed to record sufficient information about plant A to enable the eligible metered heat generated by plant A to be determined.
(6) In this regulation, “relevant energy consumption” means consumption of energy which is not energy from—
(a)a liquid filled flat plate or evacuated tube solar collector; or
(b)a source other than heat from the air, water or the ground.
Details of which are available at www.microgenerationcertification.org.
The ISBN for the English language version of this standard is ISBN 0580294153. Copies can be obtained from the British Standards Institution at www.bsigroup.com .
The ISBN for the English language version of this standard is ISBN 978 0 580 78472 9. Copies can be obtained from the British Standards Institution at www.bsigroup.com .
Published on www.microgenerationcertification.org.
Published on www.microgenerationcertification.org.
Published on www.microgenerationcertification.org.
S.I. 2011/2860, amended by S.I. 2012/1999, S.I. 2013/1033, S.I. 2013/2410 and S.I. 2013/3179.
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys