The Simple Pressure Vessels (Safety) Regulations 2016

[F1 Obligations which are met by complying with obligations in the Directive E+W+S

38A.— (1) In this regulation—

(a) any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive;

(b) “CE marking” has the meaning given to it in Article 2(17);

(c) “harmonised standard” has the meaning given to it in Article 2(9).

(2) Subject to paragraphs (6) and (7), paragraph (3) applies where, before placing a category A vessel on the market, the manufacturer—

(a) ensures that the vessel has been designed and manufactured in accordance with the essential safety requirements set out in Annex I;

(b) ensures that the relevant conformity assessment procedures that apply to that vessel in accordance with Article 13(1) and (2) have been carried out;

(c) draws up the technical documentation referred to in Annex II;

(d) ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedures are prepared in or translated into English;

(e) affixes a CE marking and the inscriptions, in accordance with Articles 15 and 16(1) to (4);

(f) draws up an EU declaration of conformity, in accordance with Article 14; and

(g) ensures that the EU declaration of conformity is prepared in or translated into English.

(3) Where this paragraph applies—

(a) the requirements of regulations 4(1), 5, 6(1) to (3) and (5) are to be treated as being satisfied;

(b) regulations 2(5)(a), 6(4), 8, 9(2), 16(2) and 38 apply subject to the modifications in paragraph (10);

(c) Part 3 does not apply; and

(d) regulation 62 does not apply.

(4) Subject to paragraphs (6) and (7), paragraph (5) applies where, before placing a category A vessel on the market, the importer ensures that—

(a) the relevant conformity assessment procedures that apply to that vessel in accordance with Article 13(1) and (2) have been carried out;

(b) the manufacturer has drawn up the technical documentation referred to in Annex II; and

(c) the vessel bears the CE marking and inscriptions referred to in point 1 of Annex III.

(5) Where this paragraph applies—

(a) the requirements of regulation 18(a) to (c) are to be treated as being satisfied; and

(b) regulations 2(5)(a), 19(1), 23 and 26 apply subject to the modifications in paragraph (10).

(6) This paragraph applies where there is no designated standard or part of a designated standard which corresponds exactly to a harmonised standard or part of a harmonised standard referred to in Article 12.

(7) Where paragraph (6) applies, paragraphs (2)(b) and (4)(a) are to be treated as requiring the manufacturer to have carried out—

(a) the conformity assessment procedure set out in Article 13(1)(b); and

(b) the relevant conformity assessment procedure that applies to that product in accordance with Article 13(2).

(8) Paragraph (9) applies where, before making a category A vessel available on the market, a distributor ensures that the vessel bears the CE marking and inscriptions referred to in point 1 of Annex III.

(9) Where this paragraph applies—

(a) regulation 29(a)(i) is to be treated as being satisfied; and

(b) regulations 2(5)(a), 30(1) and 32 apply subject to the modifications in paragraph (10).

(10) The modifications referred to in paragraphs (3)(b), (5)(b) and (9)(b) are that—

(a) any reference to “declaration of conformity” is to be read as a reference to the EU declaration of conformity;

(b) any reference to “UK marking” is to be read as a reference to the CE marking;

(c) any reference to “essential safety requirements” is to be read as a reference to the essential safety requirements referred to in Annex I;

(d) any reference to “designated standard” is to be read as a reference to a harmonised standard;

(e) any reference to “relevant conformity assessment procedure” is to be read as a reference to the conformity assessment procedures that apply to the vessel in accordance with Article 13(1) and (2);

(f) any reference to “technical documentation” is a reference to the technical documentation referred to in Annex II.]

Textual Amendments

F1 Regs. 38A-38D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 21 para. 24 (with Sch. 21 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 13(6)); 2020 c. 1, Sch. 5 para. 1(1)