Chwilio Deddfwriaeth

The Lifts Regulations 2016

Status:

Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol).

Conformity assessment procedures for lifts

47.—(1) For the assessment of conformity of a lift, the installer must carry out one of the following procedures—

(a)if the lift is designed and manufactured in accordance with a model lift that has undergone an EU-type examination set out in Part B of Annex IV to the Directive (as amended from time to time)—

(i)final inspection for lifts set out in Annex V to the Directive (as amended from time to time);

(ii)conformity to type based on product quality assurance for lifts set out in Annex X to the Directive (as amended from time to time);

(iii)conformity to type based on production quality assurance for lifts set out in Annex XII to the Directive (as amended from time to time);

(b)if the lift is designed and manufactured under a quality assurance system approved in accordance with Annex XI to the Directive (as amended from time to time)—

(i)final inspection for lifts set out in Annex V to the Directive (as amended from time to time);

(ii)conformity to type based on product quality assurance for lifts set out in Annex X to the Directive (as amended from time to time);

(iii)conformity to type based on production quality assurance for lifts set out in Annex XII to the Directive (as amended from time to time);

(c)conformity based on unit verification for lifts set out in Annex VIII to the Directive (as amended from time to time);

(d)conformity based on full quality assurance plus design examination for lifts set out in Annex XI to the Directive (as amended from time to time).

(2) Where one of the procedures in paragraph (1)(a) or (1)(b) is carried out and the person responsible for the design and manufacture of the lift and the person responsible for the installation and testing of the lift are not the same person, the former must supply to the latter all the necessary documents and information to enable the latter to ensure the correct and safe installation and testing of the lift.

(3) Where one of the procedures in paragraph (1)(a) is carried out, the installer must ensure that all permitted variations between the model lift and the lifts derived from the model lift are clearly specified (with maximum and minimum values) in the technical documentation referred to in regulation 7(b).

(4) When using the procedure in paragraph 9(1)(a), in order to demonstrate the conformity of a lift with the essential health and safety requirements, the installer may demonstrate the similarity of a range of equipment—

(a)by calculation;

(b)on the basis of design plans; or

(c)using both of the methods specified in sub-paragraphs (a) and (b).

Yn ôl i’r brig

Options/Help

Print Options

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel deddfwyd fersiwn a ddefnyddiwyd am y copi print
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Asesiadau Effaith

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel gwnaed fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill