50.—(1) The CE marking must be affixed visibly, legibly and indelibly to the lift carrier or the safety component for lifts.
(2) Where it is not possible, on account of the nature of a safety component for lifts, to affix the CE marking in accordance with paragraph (1), the CE marking must be affixed to a label inseparably attached to the safety component for lifts.
(3) The CE marking on a lift must be followed by the identification number of the notified body involved in any of the following conformity assessment procedures—
(a)the final inspection referred to in Annex V to the Directive (as amended from time to time);
(b)unit verification referred to in Annex VIII to the Directive (as amended from time to time);
(c)quality assurance referred to in Annexes X, XI or XII to the Directive (as amended from time to time).
(4) The CE marking on a safety component for lifts must be followed by the identification number of the notified body involved in any of the following conformity assessment procedures—
(a)product quality assurance referred to in Annex VI to the Directive (as amended from time to time);
(b)full quality assurance referred to in Annex VII to the Directive (as amended from time to time);
(c)conformity to type with random checking for safety components for lifts referred to in Annex IX to the Directive (as amended from time to time).
(5) The identification number of the notified body must be affixed—
(a)by the notified body itself; or
(b)under the instructions of the notified body, by the installer or the installer’s authorised representative or by the manufacturer or the manufacturer’s authorised representative.