Chwilio Deddfwriaeth

Chwiliad Uwch

The Electrical Equipment (Safety) Regulations 2016

Status:

Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol).

PART 3Conformity assessment

Presumption of conformity on the basis of harmonised standards

36.—(1) Electrical equipment which is in conformity with a harmonised standard (or part of such a standard) the reference to which has been published in the Official Journal is to be presumed to be in conformity with the principal elements of the safety objectives covered by that standard (or that part of that standard).

(2) The presumption in paragraph (1) is rebuttable.

Conformity with other standards and requirements

37.—(1) Where there are no relevant harmonised standards, electrical equipment which satisfies safety provisions of international standards notified by the Commission is to be presumed to be in conformity with the principal elements of the safety objectives unless there are reasonable grounds for suspecting that the electrical equipment does not so comply.

(2) When there are no relevant harmonised standards and no relevant international safety provisions, electrical equipment is to be taken to comply with the principal elements of the safety objectives where—

(a)the equipment has been manufactured in accordance with the national safety provisions applicable to that equipment in the member State of manufacture; and

(b)as a result of its compliance with those national safety provisions, at the time when it is made available on the market it is at least as safe as it would be if it were in conformity with the principal elements of the safety objectives.

(3) In this regulation, “international standards notified by the Commission” means international standards set out by the International Electrotechnical Commission—

(a)which have been notified by the European Commission to the member States; and

(b)in respect of which no objection to their recognition has been made by a member State within three months of that notification.

EU declaration of conformity

38.  The EU declaration of conformity for electrical equipment must—

(a)state that the fulfilment of the principal elements of the safety objectives has been demonstrated in respect of the electrical equipment;

(b)have the model structure set out in Schedule 8; and

(c)contain the elements specified in Schedule 2 for Module A Internal production control.

CE marking

39.—(1) The CE marking must be affixed visibly, legibly and indelibly to the electrical equipment or to its data plate.

(2) Where it is not possible or warranted, on account of the nature of the electrical equipment, to affix the CE marking in accordance with paragraph (1), the CE marking must be affixed to—

(a)the packaging; and

(b)the accompanying documents.

Yn ôl i’r brig

Options/Help

Print Options

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Memorandwm Esboniadol

Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel deddfwyd fersiwn a ddefnyddiwyd am y copi print
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Asesiadau Effaith

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel gwnaed fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill