Chwilio Deddfwriaeth

The Renewable Heat Incentive Scheme Regulations 2018

Status:

Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol).

Regulation 6(c)

SCHEDULE 1Content of RHI emission certificates

This Atodlen has no associated Memorandwm Esboniadol

1.  The name and address of the testing laboratory by which tests have been carried out.

2.  The name and signature of the person authorised by the testing laboratory to issue the certificate.

3.  The date of issue of the certificate together with a certificate reference number.

4.  Where the testing laboratory is accredited to BS EN ISO/IEC 17025:2005(1)—

(a)the date of that accreditation; and

(b)the accreditation number.

5.  The name, model, manufacturer and installation capacity of the plant tested.

6.  The date of the testing.

7.  Confirmation that emissions of NOₓ and PM have been tested on the same occasion in accordance with the requirements specified in paragraph 8 or 9.

8.  The requirements of this paragraph are that testing is carried out in accordance with the provisions relevant to emissions of PM and NOₓ in either BS EN 303-5:1999(2) or BS EN 303-5:2012(3), whichever standard is current at the time of testing.

9.  The requirements of this paragraph are that—

(a)testing is carried out in accordance with—

(i)BS EN 14792:2005(4) in respect of NOₓ emissions; and

(ii)BS EN 13284-1:2002(5) or BS ISO 9096:2003(6) in respect of PM emissions;

(b)the emissions of PM represent the average of at least three measurements of emissions of PM, each of at least 30 minutes duration; and

(c)the value for NOₓ emissions is derived from the average of measurements made throughout the PM emission tests.

10.  Confirmation that the test was carried out at no less than 85% of the installation capacity of the plant.

11.  Confirmation that when tested as specified in paragraphs 7 to 10—

(a)emissions of PM from the plant did not exceed 30 grams of PM per gigajoule net heat input; and

(b)emissions of NOₓ did not exceed 150 grams of NOₓ per gigajoule net heat input.

12.  The actual emissions of PM and NOₓ measured when the plant was tested as specified in paragraphs 7 to 10.

13.  A list of—

(a)the types of fuel used during the testing; and

(b)the types of fuel which can be used so as to ensure that the emission limits referred to in paragraph 11 are not exceeded.

14.  The moisture content of the fuel used during testing and the maximum moisture content which can be used so as to ensure that the emission limits referred to in paragraph 11 are not exceeded.

15.  A statement indicating whether or not the plant tested was a manually stoked natural draught plant.

16.  A list of plants, other than the plant tested, in the type-testing range of plants to which the certificate applies, if any.

(1)

The ISBN for the English language version of this standard is ISBN 0 580 46330 3. This standard was published by the British Standards Institution on 29th June 2005 and copies, including hard copies, can be obtained at www.bsigroup.com.

(2)

The ISBN for the English language version of this standard is ISBN 0 580 32356 0. This standard was published by the British Standards Institution on 15th November 1999 and copies, including hard copies, can be obtained at www.bsigroup.com.

(3)

The ISBN for the English language version of this standard is ISBN 978 0 580 71785 7. This standard was published by the British Standards Institution on 31st August 2012 and copies, including hard copies, can be obtained at www.bsigroup.com.

(4)

The ISBN for the English language version of this standard is ISBN 0 580 46990 5. This standard was published by the British Standards Institution on 4th January 2006 and copies, including hard copies, can be obtained at www.bsigroup.com.

(5)

The ISBN for the English language version of this standard is ISBN 0 580 38920 0. This standard was published by the British Standards Institution on 25th January 2002 and copies, including hard copies, can be obtained at www.bsigroup.com.

(6)

The ISBN for the English language version of this standard is ISBN 0 580 41276 8. This standard was published by the British Standards Institution on 24th February 2003 and copies, including hard copies, can be obtained at www.bsigroup.com.

Yn ôl i’r brig

Options/Help

Print Options

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Memorandwm Esboniadol

Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel deddfwyd fersiwn a ddefnyddiwyd am y copi print
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Asesiadau Effaith

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel gwnaed fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill