Chwilio Deddfwriaeth

The Democratic People's Republic of Korea (Sanctions) (EU Exit) Regulations 2019

 Help about what version

Pa Fersiwn

 Help about advanced features

Nodweddion Uwch

Changes over time for: SCHEDULE 2

 Help about opening options

Alternative versions:

Changes to legislation:

There are outstanding changes not yet made by the legislation.gov.uk editorial team to The Democratic People's Republic of Korea (Sanctions) (EU Exit) Regulations 2019. Any changes that have already been made by the team appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to Schedule 2:

Changes and effects yet to be applied to the whole Instrument associated Parts and Chapters:

Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):

Regulation 64

SCHEDULE 2U.K.Other arms- and WMD-related goods and technology

This Atodlen has no associated Memorandwm Esboniadol

InterpretationU.K.

1.  For the purposes of this Schedule—

(a)a reference to any item includes that item whether it is new or used;

(b)a thing is specified in or by a Dual-Use code if it would be specified in or by that code in accordance with the Dual-Use Regulation;

[F1(c)a reference to a “CAS No” followed by a numerical sequence is a reference to the CAS Registry Numbers (CAS numbers) assigned to chemicals by the Chemical Abstracts Service, a division of the American Chemical Society. In some instances chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers;]

(d)a “Dual-Use code” means an alphanumeric code as it is used in Annex I to the Dual-Use Regulation; and

(e)software” has the meaning given to it in the Dual-Use Regulation.

Textual Amendments

Commencement Information

I1Sch. 2 para. 1 not in force at made date, see reg. 1(2)

I2Sch. 2 para. 1 in force at 31.12.2020 by S.I. 2019/627, reg. 7(2); 2020 c. 1, Sch. 5 para. 1(1)

Principal elementU.K.

2.—(1) Any item (“A”) not listed in any of paragraphs 3 to 79 is included in this Schedule if—

(a)an item listed in any of paragraphs 3 to 79 is a principal element of A, and

(b)that principal element can be removed and used separately.

(2) Whether an item is a principal element of any other item shall be determined having regard to quantity, value, technological know-how involved and any other relevant factors.

Commencement Information

I3Sch. 2 para. 2 not in force at made date, see reg. 1(2)

Nuclear materials, facilities, and equipmentU.K.

3.  Hollow cathode lamps as follows—

(a)iodine hollow cathode lamps with windows in pure silicon or quartz;

(b)uranium hollow cathode lamps.

Commencement Information

I5Sch. 2 para. 3 not in force at made date, see reg. 1(2)

4.  Faraday isolators in the wavelength range 500 nm-650 nm.U.K.

Commencement Information

I7Sch. 2 para. 4 not in force at made date, see reg. 1(2)

5.  Optical gratings in the wavelength range 500 nm-650 nm.U.K.

Commencement Information

I9Sch. 2 para. 5 not in force at made date, see reg. 1(2)

6.  Optical fibres in the wavelength range 500 nm-650 nm coated with anti-reflecting layers in the wavelength range 500 nm-650 nm and having a core diameter greater than 0.4 mm but not exceeding 2 mm.U.K.

Commencement Information

I11Sch. 2 para. 6 not in force at made date, see reg. 1(2)

7.  Nuclear reactor vessel components and testing equipment, other than those specified in Dual-Use code 0A001, as follows—U.K.

(a)seals;

(b)internal components;

(c)sealing, testing and measurement equipment.

Commencement Information

I13Sch. 2 para. 7 not in force at made date, see reg. 1(2)

8.—(1) Nuclear detection systems, other than those specified in Dual-Use codes 0A001.j. or 1A004.c., for detection, identification or quantification of radioactive materials or radiation of nuclear origin and specially designed components thereof.U.K.

(2) Sub-paragraph (1) does not include personal equipment.

Commencement Information

I15Sch. 2 para. 8 not in force at made date, see reg. 1(2)

9.  Bellows-sealed valves other than those specified in Dual-Use codes 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L.U.K.

Commencement Information

I17Sch. 2 para. 9 not in force at made date, see reg. 1(2)

10.—(1) Laser mirrors, other than those specified in Dual-Use code 6A005.e., consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 ℃ (e.g. fused silica or sapphire).U.K.

(2) Sub-paragraph (1) does not include optical systems specially designed for astronomical applications, except if the mirrors contain fused silica.

Commencement Information

I19Sch. 2 para. 10 not in force at made date, see reg. 1(2)

11.  Laser lenses, other than those specified in Dual-Use code 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10– 6 K– 1 or less at 20 °C (e.g. fused silica).U.K.

Commencement Information

I21Sch. 2 para. 11 not in force at made date, see reg. 1(2)

12.  Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in Dual-Use code 2B350.h.1.U.K.

Commencement Information

I23Sch. 2 para. 12 not in force at made date, see reg. 1(2)

13.  Vacuum pumps other than those specified in Dual-Use code 0B002.f.2. or 2B231, as follows—U.K.

(a)turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s;

(b)roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m³/h;

(c)bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps.

Commencement Information

I25Sch. 2 para. 13 not in force at made date, see reg. 1(2)

14.  Shielded enclosures for the manipulation, storage and handling of radioactive substances (also known as hot cells).U.K.

Commencement Information

I27Sch. 2 para. 14 not in force at made date, see reg. 1(2)

15.—(1) Natural uranium, depleted uranium or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in Dual-Use code 0C001.U.K.

(2) In this paragraph “natural uranium” and “depleted uranium” each have the meaning given to them in the Dual-Use Regulation.

Commencement Information

I29Sch. 2 para. 15 not in force at made date, see reg. 1(2)

16.  Detonation chambers having a capacity of explosion absorption of more than 2.5 kg TNT equivalent.U.K.

Commencement Information

I31Sch. 2 para. 16 not in force at made date, see reg. 1(2)

Special materials and related equipmentU.K.

17.  Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) [F2(CAS No 298-07-07)] solvent in any quantity, with a purity greater than 90 %.

Textual Amendments

Commencement Information

I33Sch. 2 para. 17 not in force at made date, see reg. 1(2)

I34Sch. 2 para. 17 in force at 31.12.2020 by S.I. 2019/627, reg. 7(2); 2020 c. 1, Sch. 5 para. 1(1)

18.  Fluorine gas [F3(CAS No 7782-41-4)], with a purity of at least 95 %.U.K.

Textual Amendments

Commencement Information

I35Sch. 2 para. 18 not in force at made date, see reg. 1(2)

I36Sch. 2 para. 18 in force at 31.12.2020 by S.I. 2019/627, reg. 7(2); 2020 c. 1, Sch. 5 para. 1(1)

19.  Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials—U.K.

(a)copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching;

(b)fluorinated polyimides containing 10 % by weight or more of combined fluorine;

(c)fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine;

(d)polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®);

(e)fluoro-elastomers (e.g. Viton ®, Tecnoflon ®);

(f)polytetrafluoroethylene (PTFE).

Commencement Information

I37Sch. 2 para. 19 not in force at made date, see reg. 1(2)

20.  Personal equipment for detecting radiation of nuclear origin, other than that specified in Dual-Use code 1A004.c., including personal dosimeters.U.K.

Commencement Information

I39Sch. 2 para. 20 not in force at made date, see reg. 1(2)

21.  Electrolytic cells for fluorine production, other than those specified in Dual-Use code 1B225, with an output capacity greater than 100 g of fluorine per hour.U.K.

Commencement Information

I41Sch. 2 para. 21 not in force at made date, see reg. 1(2)

22.  Catalysts, other than those specified in Dual-Use codes 1A225 or 1B231, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.U.K.

Commencement Information

I43Sch. 2 para. 22 not in force at made date, see reg. 1(2)

23.—(1) Aluminium and its alloys, other than those specified in Dual-Use codes 1C002.b.4. or 1C202.a., in crude or semi-fabricated form having either of the following characteristics—U.K.

(a)capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or

(b)having a tensile strength of 415 MPa or more at 298 K (25 °C).

(2) In this paragraph, a reference to an alloy “capable of” something encompasses alloys before or after heat treatment.

Commencement Information

I45Sch. 2 para. 23 not in force at made date, see reg. 1(2)

24.—(1) Magnetic metals, of all types and of whatever form, other than those specified in Dual-Use code 1C003.a. having an initial relative permeability of 120,000 or more and a thickness between 0.05 mm and 0.1 mm.U.K.

(2) For the purposes of sub-paragraph (1), the measurement of initial relative permeability means that measurement performed on fully annealed materials.

Commencement Information

I47Sch. 2 para. 24 not in force at made date, see reg. 1(2)

25.—(1) Fibrous or filamentary materials or prepregs, other than those specified in Dual-Use codes 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows—U.K.

(a)aramid fibrous or filamentary materials having either of the following characteristics—

(i)specific modulus exceeding 10 × 106 m; or

(ii)specific tensile strength exceeding 17 × 104 m;

(b)glass fibrous or filamentary materials having either of the following characteristics:

(i)specific modulus exceeding 3,18 × 106 m; or

(ii)specific tensile strength exceeding 76.2 × 103 m;

(c)thermoset resin-impregnated continuous yarns, rovings, tows or tapes with a width of 15 mm or less (once prepregs), made from glass fibrous or filamentary materials other than those specified in 26(1)(a)below;

(d)carbon fibrous or filamentary materials;

(e)thermoset resin-impregnated continuous yarns, rovings, tows, or tapes, made from carbon fibrous or filamentary materials;

(f)polyacrylonitrile (PAN) continuous yarns, rovings, tows or tapes;

(g)para-aramid fibrous or filamentary materials (Kevlar® and other Kevlar®-like fibres).

(2) In this paragraph the following terms have the meaning given to them in the Dual-Use Regulation—

  • “fibrous or filamentary materials”

  • “specific modulus”

  • “specific tensile strength”

  • “yarns”

  • “rovings”

  • “tows”

  • “tapes”.

Commencement Information

I49Sch. 2 para. 25 not in force at made date, see reg. 1(2)

26.—(1) Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon-coated fibres (preforms) or carbon fibre preforms, as follows—U.K.

(a)made from fibrous or filamentary materials specified in paragraph 25;

(b)epoxy resin matrix impregnated carbon fibrous or filamentary materials (prepregs), specified in Dual-Use codes 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm;

(c)prepregs specified in Dual-Use codes 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature.

(2) In this paragraph the following terms have the meaning given to them in the Dual-Use Regulation—

  • “carbon fibre preforms”;

  • “fibrous or filamentary materials”;

  • “matrix”.

Commencement Information

I51Sch. 2 para. 26 not in force at made date, see reg. 1(2)

27.—(1) Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in missiles, other than those specified in Dual-Use code 1C107.U.K.

(2) In this paragraph, “missiles” has the meaning given to it in the Dual-Use Regulation.

Commencement Information

I53Sch. 2 para. 27 not in force at made date, see reg. 1(2)

28.  Tantalum, tantalum carbide, tungsten, tungsten carbide and alloys thereof, other than those specified in Dual-Use code 1C226, having both of the following characteristics—U.K.

(a)in forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; and

(b)a mass greater than 5 kg.

Commencement Information

I55Sch. 2 para. 28 not in force at made date, see reg. 1(2)

29.—(1) Elemental powders of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm.U.K.

(2) In this paragraph “elemental powder” means a high purity powder of one element.

Commencement Information

I57Sch. 2 para. 29 not in force at made date, see reg. 1(2)

30.  Pure tributyl phosphate (TBP) [F4(CAS No 126-73-8)] or any mixture having a TBP content of more than 5 % by weight.U.K.

Textual Amendments

Commencement Information

I59Sch. 2 para. 30 not in force at made date, see reg. 1(2)

I60Sch. 2 para. 30 in force at 31.12.2020 by S.I. 2019/627, reg. 7(2); 2020 c. 1, Sch. 5 para. 1(1)

31.—(1) Maraging steel, other than those specified by Dual-Use codes 1C116 or 1C216.U.K.

(2) In this paragraph, “maraging steels” means iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy.

Commencement Information

I61Sch. 2 para. 31 not in force at made date, see reg. 1(2)

32.  Metals, metal powders and material as follows—U.K.

(a)tungsten and tungsten alloys, other than those specified in Dual-Use code 1C117, in the form of uniform spherical or atomized particles of 500 μm (micrometre) diameter or less with a tungsten content of 97 % by weight or more;

(b)molybdenum and molybdenum alloys, other than those specified in Dual-Use code 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a molybdenum content of 97 % by weight or more;

(c)tungsten materials in the solid form, other than those specified in Dual-Use code 1C226 having material compositions as follows—

(i)tungsten and alloys containing 97 % by weight or more of tungsten;

(ii)copper infiltrated tungsten containing 80 % by weight or more of tungsten; or

(iii)silver infiltrated tungsten containing 80 % by weight or more of tungsten.

Commencement Information

I63Sch. 2 para. 32 not in force at made date, see reg. 1(2)

33.  Soft magnetic alloys, other than those specified in Dual-Use code 1C003, having a chemical composition as follows—U.K.

(a)iron content between 30 % and 60 %; and

(b)cobalt content between 40 % and 60 %.

Commencement Information

I65Sch. 2 para. 33 not in force at made date, see reg. 1(2)

34.  Graphite, other than that specified in Dual-Use code 0C004 or 1C107.a., designed or specified for use in Electrical Discharge Machining (EDM) machines.U.K.

Commencement Information

I67Sch. 2 para. 34 not in force at made date, see reg. 1(2)

35.—(1) Steel alloys in sheet or plate form, having any of the following characteristics—U.K.

(a)steel alloys capable of ultimate tensile strength of 1 200 MPa or more, at 293 K (20 °C); or

(b)nitrogen-stabilised duplex stainless steel.

(2) In this paragraph—

(a)nitrogen-stabilised duplex stainless steel” means steel with a two-phase microstructure consisting of grains of ferritic and austenitic steel with the addition of nitrogen to stabilise the microstructure;

(b)a reference to an alloy “capable of” something encompasses alloys before or after heat treatment.

Commencement Information

I69Sch. 2 para. 35 not in force at made date, see reg. 1(2)

36.  Carbon-Carbon Composite material.U.K.

Commencement Information

I71Sch. 2 para. 36 not in force at made date, see reg. 1(2)

37.  Nickel alloys in crude or semi-fabricated form, containing 60 % by weight or more nickel.U.K.

Commencement Information

I73Sch. 2 para. 37 not in force at made date, see reg. 1(2)

38.—(1) Titanium alloys in sheet or plate form capable of an ultimate tensile strength of 900 MPa or more at 293 K (20 °C).U.K.

(2) In this regulation, a reference to an alloy “capable of” something encompasses alloys before or after heat treatment

Commencement Information

I75Sch. 2 para. 38 not in force at made date, see reg. 1(2)

39.  Titanium alloys, other than those specified in Dual-Use codes 1C002 and 1C202.U.K.

Commencement Information

I77Sch. 2 para. 39 not in force at made date, see reg. 1(2)

40.  Zirconium and zirconium alloys, other than those specified in Dual-Use codes 1C011, 1C111 and 1C234.U.K.

Commencement Information

I79Sch. 2 para. 40 not in force at made date, see reg. 1(2)

41.  Explosive materials other than those specified in Dual-Use code 1C239, or materials or mixtures containing more than 2 % by weight of such explosive materials, with a crystalline density higher than 1.5 g/cm³ and with a detonation speed higher than 5,000 m/sU.K.

Commencement Information

I81Sch. 2 para. 41 not in force at made date, see reg. 1(2)

Materials processingU.K.

42.—(1) Vibration test systems, equipment and components thereof, other than those specified in Dual-Use code 2B116—

(a)vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured “bare table”;

(b)digital controllers, combined with specially designed vibration test software, with a real-time control bandwidth greater than 5 kHz designed for use with vibration test systems specified in paragraph (a);

(c)vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured “bare table”, and usable in vibration test systems specified in paragraph (a);

(d)rest piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured “bare table”, and usable in vibration systems specified in paragraph (a).

(2) In this paragraph—

bare table” means a flat table, or surface, with no fixture or fittings.

real-time control bandwidth” means the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals.

Commencement Information

I83Sch. 2 para. 42 not in force at made date, see reg. 1(2)

43.  Machine tools, other than those specified in Dual-Use codes 2B001 or 2B201 and any combination thereof, for removing (or cutting) metals, ceramics, or composites that, according to the manufacturer's technical specification, can be equipped with electronic devices for numerical control, having positioning accuracies of equal to or less (better) than 30 30 μm according to ISO 230/2 (1988) (or national equivalents) along any linear axis.U.K.

Commencement Information

I85Sch. 2 para. 43 not in force at made date, see reg. 1(2)

44.  Components and numerical controls, specially designed for machine tools specified in Dual-Use codes 2B001, 2B201 or paragraph 43.U.K.

Commencement Information

I87Sch. 2 para. 44 not in force at made date, see reg. 1(2)

45.  Balancing machines and related equipment as follows—U.K.

(a)balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics—

(i)not capable of balancing rotors/assemblies having a mass greater than 3 kg;

(ii)capable of balancing rotors/assemblies at speeds greater than 12 500 rpm;

(iii)capable of correcting unbalance in two planes or more; and

(iv)capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass;

(b)indicator heads (sometimes known as balancing instrumentation) designed or modified for use with machines specified in paragraph (a).

Commencement Information

I89Sch. 2 para. 45 not in force at made date, see reg. 1(2)

46.—(1) Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in Dual-Use codes 2B225, having either of the following characteristics—U.K.

(a)a capability of penetrating a hot cell wall of 0.3 m or more (through the wall operation); or

(b)a capability of bridging over the top of a hot cell wall with a thickness of 0.3 m or more (over the wall operation).

(2) For the purposes of this paragraph, remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad.

Commencement Information

I91Sch. 2 para. 46 not in force at made date, see reg. 1(2)

47.  Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C, excluding tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics.U.K.

Commencement Information

I93Sch. 2 para. 47 not in force at made date, see reg. 1(2)

48.—(1) Pressure transducers, other than those defined in Dual-Use codes 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics—U.K.

(a)pressure sensing elements made of or protected by materials resistant to corrosion by uranium hexafluoride (UF6); and

(b)having either of the following characteristics:

(i)a full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or

(ii)a full scale of 200 kPa or greater and an accuracy of better than 2 kPa.

(2) In this paragraph, the following terms have the meaning given to them in the Dual-Use Regulation—

  • “accuracy”;

  • “pressure transducer”;

  • “materials resistant to corrosion by uranium hexafluoride (UF6)”.

Commencement Information

I95Sch. 2 para. 48 not in force at made date, see reg. 1(2)

49.—(1) Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials—U.K.

(a)alloys with more than 25 % nickel and 20 % chromium by weight;

(b)fluoropolymers;

(c)glass (including vitrified or enamelled coating or glass lining);

(d)graphite or carbon graphite;

(e)nickel or alloys with more than 40 % nickel by weight;

(f)tantalum or tantalum alloys;

(g)titanium or titanium alloys;

(h)zirconium or zirconium alloys; or

(i)stainless steel.

(2) In this paragraph, “carbon graphite” is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight.

Commencement Information

I97Sch. 2 para. 49 not in force at made date, see reg. 1(2)

50.—(1) Industrial equipment and components, other than those specified in Dual-Use code 2B350.d., consisting of heat exchangers or condensers with a heat transfer surface area greater than 0.05 m2, and less than 30 m²; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials—U.K.

(a)alloys with more than 25 % nickel and 20 % chromium by weight;

(b)fluoropolymers;

(c)glass (including vitrified or enamelled coating or glass lining);

(d)graphite or carbon graphite;

(e)nickel or alloys with more than 40 % nickel by weight;

(f)tantalum or tantalum alloys;

(g)titanium or titanium alloys;

(h)zirconium or zirconium alloys;

(i)silicon carbide;

(j)titanium carbide; or

(k)stainless steel.

(2) Sub-paragraph (1) does not include vehicle radiators.

(3) For the purposes of this paragraph—

(a)the materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger;

(b)carbon graphite” has the meaning given to it in the Dual-Use Regulation.

Commencement Information

I99Sch. 2 para. 50 not in force at made date, see reg. 1(2)

51.—(1) Multiple-seal, and seal-less pumps, other than those specified in Dual-Use code 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials—U.K.

(a)alloys with more than 25 % nickel and 20 % chromium by weight;

(b)ceramics;

(c)ferrosilicon;

(d)fluoropolymers;

(e)glass (including vitrified or enamelled coatings or glass lining);

(f)graphite or carbon graphite;

(g)nickel or alloys with more than 40 % nickel by weight;

(h)tantalum or tantalum alloys;

(i)titanium or titanium alloys;

(j)zirconium or zirconium alloys;

(k)niobium (columbium) or niobium alloys;

(l)stainless steel;

(m)aluminium alloys; or

(n)rubber, including all kinds of natural and synthetic rubbers.

(2) For the purposes of this paragraph—

(a)the materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump;

(b)carbon graphite” has the meaning given to it in the Dual-Use Regulation.

Commencement Information

I101Sch. 2 para. 51 not in force at made date, see reg. 1(2)

52.—(1) Centrifugal separators, other than those specified in Dual-Use code 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from—U.K.

(a)alloys with more than 25 % nickel and 20 % chromium by weight;

(b)fluoropolymers;

(c)glass (including vitrified or enamelled coating or glass lining);

(d)nickel or alloys with more than 40 % nickel by weight;

(e)tantalum or tantalum alloys;

(f)titanium or titanium alloys; or

(g)zirconium or zirconium alloys.

(2) In this paragraph, centrifugal separators include decanters.

Commencement Information

I103Sch. 2 para. 52 not in force at made date, see reg. 1(2)

53.  Sintered metal filters, other than those specified in Dual-Use code 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight.U.K.

Commencement Information

I105Sch. 2 para. 53 not in force at made date, see reg. 1(2)

54.—(1) Spin-forming machines and flow-forming machines, other than those specified by Dual-Use code 2B009, 2B109 or 2B209 and specially designed components therefor.U.K.

(2) For the purpose of sub-paragraph (1), machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines.

Commencement Information

I107Sch. 2 para. 54 not in force at made date, see reg. 1(2)

55.—(1) Equipment and reagents, other than those specified in Dual-Use codes 2B350 or 2B352, as follows—U.K.

(a)fermenters capable of cultivation of pathogenic microorganisms or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more;

(b)agitators for fermenters as mentioned in (a);

(c)laboratory equipment as follows—

(i)polymerase chain reaction (PCR)-equipment;

(ii)genetic sequencing equipment;

(iii)genetic synthesizers;

(iv)electroporation equipment;

(v)specific reagents associated with the equipment in (c)(i) to (iv);

(d)filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects;

(e)ultracentrifuges, rotors and adaptors for ultracentrifuges;

(f)freeze drying equipment.

(2) In this paragraph—

  • “fermenters” include bioreactors, chemostats and continuous-flow systems;

  • Microorganisms” has the meaning given to it in the Dual-Use Regulation

Commencement Information

I109Sch. 2 para. 55 not in force at made date, see reg. 1(2)

56.  Equipment, other than that specified in Dual-Use code 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor—U.K.

(a)chemical vapour deposition (CVD) production equipment;

(b)physical vapour deposition (PVD) production equipment;

(c)production equipment for deposition by means of inductive or resistance heating.

Commencement Information

I111Sch. 2 para. 56 not in force at made date, see reg. 1(2)

57.  Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0.5 m³ (500 litres), where all surfaces that come in direct contact with the chemical being processed or contained are made from any of the following materials—U.K.

(a)alloys with more than 25 % nickel and 20 % chromium by weight;

(b)fluoropolymers;

(c)glass (including vitrified or enamelled coatings or glass lining);

(d)nickel or alloys with more than 40 % nickel by weight;

(e)tantalum or tantalum alloys;

(f)titanium or titanium alloys;

(g)zirconium or zirconium alloys;

(h)niobium (columbium) or niobium alloys;

(i)stainless steel;

(j)wood; or

(k)rubber, including all kinds of natural and synthetic rubbers.

Commencement Information

I113Sch. 2 para. 57 not in force at made date, see reg. 1(2)

ElectronicsU.K.

58.  High voltage direct current power supplies, other than those specified in Dual-Use code 0B001.j.5. or 3A227, having both of the following characteristics—

(a)capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; and

(b)Current or voltage stability better than 0,1 % over a time period of four hours.

Commencement Information

I115Sch. 2 para. 58 not in force at made date, see reg. 1(2)

59.—(1) Mass spectrometers, other than those specified in Dual-Use code 0B002.g. or 3A233, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources therefor—U.K.

(a)inductively coupled plasma mass spectrometers (ICP/MS);

(b)glow discharge mass spectrometers (GDMS);

(c)thermal ionisation mass spectrometers (TIMS);

(d)electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to corrosion by uranium hexafluoride (UF6);

(e)molecular beam mass spectrometers having either of the following characteristics:

(i)a source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or

(ii)a source chamber constructed from, lined with or plated with materials resistant to uranium hexafluoride (UF6);

(f)mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides.

(2) In this paragraph “materials resistant to corrosion by UF6” has the meaning given to it in the Dual-Use Regulation.

Commencement Information

I117Sch. 2 para. 59 not in force at made date, see reg. 1(2)

60.—(1) Frequency changers or generators, other than those specified by Dual-Use code 0B001.b.13. or 3A225, having all of the following characteristics, and specially designed components and software therefor—U.K.

(a)multiphase output capable of providing a power of 40 W or greater;

(b)capable of operating in the frequency range between 600 and 2 000 Hz; and

(c)frequency control better (less) than 0.1 %.

(2) In this paragraph, “frequency changers” includes converters, inverters, generators, electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives.

(3) The functionality specified in this paragraph may be met by certain equipment marketed as electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives.

Commencement Information

I119Sch. 2 para. 60 not in force at made date, see reg. 1(2)

61.  Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material.U.K.

Commencement Information

I121Sch. 2 para. 61 not in force at made date, see reg. 1(2)

Sensors and lasersU.K.

62.  For the purposes of paragraphs 66 to 70 and 74, “lasers” has the meaning given to it in the Dual-Use Regulation.

Commencement Information

I123Sch. 2 para. 62 not in force at made date, see reg. 1(2)

63.  Yttrium aluminium garnet (YAG) rods.U.K.

Commencement Information

I125Sch. 2 para. 63 not in force at made date, see reg. 1(2)

64.  Optical equipment and components, other than those specified in Dual-Use code 6A002 or 6A004.b consisting of infrared optics in the wavelength range 9μm-17μm and components thereof, including cadmium telluride (CdTe) components.U.K.

Commencement Information

I127Sch. 2 para. 64 not in force at made date, see reg. 1(2)

65.—(1) Wave front corrector systems, other than mirrors specified in Dual-Use code 6A004.a., 6A005.e. or 6A005.f., for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and deformable mirrors including bimorph mirrors.U.K.

(2) In this paragraph, “deformable mirrors” has the meaning given to it in the Dual-Use Regulation.

Commencement Information

I129Sch. 2 para. 65 not in force at made date, see reg. 1(2)

66.  Argon ion lasers, other than those specified in Dual-Use codes 0B001.g.5., 6A005.a.6. and/or 6A205.a., having an average output power equal to or greater than 5 W.U.K.

Commencement Information

I131Sch. 2 para. 66 not in force at made date, see reg. 1(2)

67.—(1) Subject to sub-paragraph (2), semiconductor lasers, other than those specified in Dual-Use code 0B001.g.5., 0B001.h.6. or 6A005.b., and components thereof, as follows—U.K.

(a)Individual semiconductor lasers with an output power greater than 200 mW each, in quantities larger than 100;

(b)Semiconductor laser arrays having an output power greater than 20 W

(2) Sub-paragraph (1) does not include laser diodes with a wavelength in the range 1,2 μm-2,0 μm.

(3) In this paragraph “semiconductor lasers” includes items commonly called laser diodes.

Commencement Information

I133Sch. 2 para. 67 not in force at made date, see reg. 1(2)

68.  Tunable semiconductor lasers and tunable semiconductor laser arrays, other than those specified in Dual-Use codes 0B001.h.6. or 6A005.b., of a wavelength between 9 μm and 17 μm, as well as array stacks of semiconductor lasers containing at least one tunable semiconductor laser array of such wavelength.U.K.

Commencement Information

I135Sch. 2 para. 68 not in force at made date, see reg. 1(2)

69.—(1) Solid state tunable lasers, other than those specified in Dual-Use code 0B001.g.5., 0B001.h.6. or 6A005.c.1., and specially designed components thereof, as follows:U.K.

(a)titanium-sapphire lasers;

(b)alexandrite lasers.

(2) In this paragraph, “tunable” has the meaning given to it in the Dual-Use Regulation.

Commencement Information

I137Sch. 2 para. 69 not in force at made date, see reg. 1(2)

70.  Neodymium-doped (other than glass) lasers, other than those specified in Dual-Use code 6A005.c.2.b., having an output wavelength greater than 1,0 μm but not exceeding 1,1 μm and output energy exceeding 10 J per pulse.U.K.

Commencement Information

I139Sch. 2 para. 70 not in force at made date, see reg. 1(2)

71.  Components of acousto-optics, as follows—U.K.

(a)framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz;

(b)recurrence frequency supplies;

(c)pockels cells.

Commencement Information

I141Sch. 2 para. 71 not in force at made date, see reg. 1(2)

72.—(1) Radiation-hardened cameras, or lenses thereof, other than those specified in Dual-Use code 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 103 Gy (silicon) (5 × 106 rad (silicon)) without operational degradation.U.K.

(2) In this paragraph, the term Gy (silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation.

Commencement Information

I143Sch. 2 para. 72 not in force at made date, see reg. 1(2)

73.  Tunable pulsed dye laser amplifiers and oscillators, other than those specified in Dual-Use codes 0B001.g.5., 6A005 and or 6A205.c., having all of the following characteristics—U.K.

(a)operating at wavelengths between 300 nm and 800 nm;

(b)an average output power greater than 10 W but not exceeding 30 W;

(c)a repetition rate greater than 1 kHz; and

(d)pulse width less than 100 ns[F5,]

F6(e). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

[F7but excluding single mode oscillators.]

Textual Amendments

Commencement Information

I145Sch. 2 para. 73 not in force at made date, see reg. 1(2)

I146Sch. 2 para. 73 in force at 31.12.2020 by S.I. 2019/627, reg. 7(2); 2020 c. 1, Sch. 5 para. 1(1)

74.  Pulsed carbon dioxide lasers, other than those specified in, Dual-Use code 0B001.h.6., 6A005.d. or 6A205.d., having all of the following characteristics—U.K.

(a)operating at wavelengths between 9 μm and 11 μm;

(b)a repetition rate greater than 250 Hz;

(c)an average output power greater than 100 W but not exceeding 500 W; and

(d)pulse width less than 200 ns.

Commencement Information

I147Sch. 2 para. 74 not in force at made date, see reg. 1(2)

75.  Lasers, other than those specified in Dual-Use code 6A005 or 6A205.U.K.

Commencement Information

I149Sch. 2 para. 75 not in force at made date, see reg. 1(2)

Navigation and avionicsU.K.

76.—(1) Inertial navigation systems and specially designed components thereof, as follows—

(a)inertial navigation systems which are certified for use on civil aircraft by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows—

(i)inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft, land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof—

(aa)navigation error (free inertial) subsequent to normal alignment of 0.8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or

(bb)specified to function at linear acceleration levels exceeding 10 g;

(ii)hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation (DBRN) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP);

(iii)inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof:

(aa)designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or

(bb)designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec.

(b)theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof;

(c)inertial or other equipment using accelerometers specified in Dual-Use code 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.

(2) The parameters set out in sub-paragraph (1)(a)(i) and (ii) are applicable with any of the following environmental conditions—

(a)input random vibration with an overall magnitude of 7.7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following—

(i)a constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1 000 Hz; and

(ii)the PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1 000 to 2 000 Hz;

(b)a roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or

(c)according to national standards equivalent to (i) or (ii) above.

(3) Sub-paragraph (1)(a)(ii) refers to systems in which an Inertial Navigation System and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance.

(4) In this paragraph—

(a)the following terms have the meaning given to them in the Dual-Use Regulation—

  • “aircraft”;

  • “circular error probable”;

  • “civil aircraft”;

  • “Data-Based Referenced Navigation” ;

  • “spacecraft”.

Commencement Information

I151Sch. 2 para. 76 not in force at made date, see reg. 1(2)

Aerospace and propulsionU.K.

77.  Explosive bolts.

Commencement Information

I153Sch. 2 para. 77 not in force at made date, see reg. 1(2)

78.—(1) Internal combustion engines F8... designed or modified for propelling aircraft or lighter-than-air-vehicles [F9.]U.K.

[F10(2) Specially designed components for the engines specified in sub-paragraph (1).]

(3) For the purposes of this paragraph—

(a)internal combustion engines” includes engines of axial piston and rotary piston type;

(b)The following terms have the meaning given to them in the Dual-Use Regulation—

  • “aircraft”;

  • “airship”;

  • “lighter-than-air vehicle”.

Textual Amendments

Commencement Information

I155Sch. 2 para. 78 not in force at made date, see reg. 1(2)

I156Sch. 2 para. 78 in force at 31.12.2020 by S.I. 2019/627, reg. 7(2); 2020 c. 1, Sch. 5 para. 1(1)

79.  Trucks, other than those specified in Dual-Use code 9A115, having more than one motorised axle and a payload exceeding 5 tonnes, including flatbed trailers, semi trailers and other trailers.U.K.

Commencement Information

I157Sch. 2 para. 79 not in force at made date, see reg. 1(2)

Software and TechnologyU.K.

80.—(1) Software required for the development, production or use of goods listed in paragraphs 3 to 79 of this Schedule.

(2) Subject to sub-paragraph (2) technology required for the development, production or use of goods listed in paragraphs 3 to 79 of this Schedule.

(3) In this paragraph, the following terms have the meaning given to them in the Dual-Use Regulation—

  • “development”

  • “required”;

  • “production”

  • “technology”

  • “use”.

Commencement Information

I159Sch. 2 para. 80 not in force at made date, see reg. 1(2)

Certain key components for the ballistic-missile sector.U.K.

81.  Any goods listed in Part III of Annex II of Council Regulation (EU) No 2017/1509 of 30 August 2017 concerning restrictive measures against the Democratic People's Republic of Korea and repealing Regulation (EC) No 329/2007, as it has effect immediately before [F11IP completion day].

Textual Amendments

Commencement Information

I161Sch. 2 para. 81 not in force at made date, see reg. 1(2)

I162Sch. 2 para. 81 in force at 31.12.2020 by S.I. 2019/627, reg. 7(2); 2020 c. 1, Sch. 5 para. 1(1)

Yn ôl i’r brig

Options/Cymorth

Print Options

You have chosen to open The Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Instrument as a PDF

The Whole Instrument you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open yr Offeryn Cyfan

Yr Offeryn Cyfan you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.

Close

Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys

Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Memorandwm Esboniadol

Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel deddfwyd fersiwn a ddefnyddiwyd am y copi print
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel gwnaed fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill