xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
Textual Amendments
F1Words in Sch. 3 heading inserted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(a)
1. The following Commission Decisions [F2have effect, in relation to England and Wales, and Scotland, as if they were repealed] —
(a)Commission Decision 94/23/EC of 17 January 1994 on common procedural rules for European technical approval;
(b)Commission Decision 97/571/EC of 22 July 1997 on the general format of European Technical Approval for construction products;
(c)Commission Decision 2003/312/EC of 9 April 2003 on the publication of the reference of standards relating to thermal insulation products, geotextiles, fixed firefighting equipment and gypsum blocks in accordance with Council Directive 89/106/EEC;
(d)Commission Decision 2006/893/EC of 5 December 2006 on the withdrawal of the reference of standard EN 10080:2005 ‘Steel for the reinforcement of concrete – Weldable reinforcing steel – General’ in accordance with Council Directive 89/106/EC.
Textual Amendments
F2Words in Sch. 3 para. 1 substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(b)
Commencement Information
I1Sch. 3 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
2.—(1) The relevant Commission Decisions have effect [F3, in relation to England and Wales, and Scotland,] as if—
(a)any reference to a mandate for a harmonised standard were a reference to a standardisation mandate under the 2011 Regulation;
(b)any Article providing that the decision is addressed to the member States were omitted;
(c)any reference to the European standardisation bodies were a reference to a recognised standardisation body under the 2011 Regulation;
(d)any reference to a relevant harmonised standard were a reference to a [F4designated standard] prepared under Article 18A of the 2011 Regulation;
(e)any reference to at least one member State having no legal requirement at all for a characteristic were a reference to there being no legal requirement at all for the characteristic in [F5Great Britain];
(f)any reference to the European Organisation for Technical Approval were a reference to the responsible TAB under the 2011 Regulation;
(g)any reference to a mandate for relevant guidelines for European Technical Approval, or to the relevant guidelines themselves, were a reference to a relevant UK Assessment Document under the 2011 Regulation;
(h)any reference to the “mandates for European technical specifications” were a reference to a relevant UK Assessment Document under the 2011 Regulation;
(i)any reference to a requirement to indicate a procedure “in the mandates and in the technical specifications referred to in Article 4 of the Construction Products Directive” were a reference to a requirement to indicate the procedure in the standardisation mandates and the UK Assessment Documents under the 2011 Regulation and in the standards prepared under Article 18A of that Regulation;
(j)any reference to a requirement to indicate the procedure for attesting conformity in the relevant European technical approvals were a reference to a requirement to indicate the procedure for attesting conformity in the relevant UK Assessment Documents under the 2011 Regulation;
(k)any reference to specifying a system of attestation of conformity in the relevant European technical approval were a reference to specifying a system of attestation of conformity in the relevant UK Assessment Document under the 2011 Regulation.
(2) The “relevant Commission Decisions” are—
(a)Commission Decision 95/467/EC of 24 October 1995 implementing Article 20(2) of Council Directive 89/106/EEC on construction products;
(b)Commission Decision 96/577/EC of 24 June 1996 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards fixed fire-fighting systems;
(c)Commission Decision 96/578/EC of 24 June 1996 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards sanitary appliances;
(d)Commission Decision 96/579/EC of 24 June 1996 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards circulation fixtures;
(e)Commission Decision 96/580/EC of 24 June 1996 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards curtain walling;
(f)Commission Decision 96/582/EC of 24 June 1996 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards structural sealant glazing systems and metal anchors for concrete;
(g)Commission Decision 97/161/EC of 17 February 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards metal anchors for use in concrete for fixing lightweight systems;
(h)Commission Decision 97/176/EC of 17 February 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards structural timber products and ancillaries;
(i)Commission Decision 97/177/EC of 17 February 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards metal injection anchors for use in masonry;
(j)Commission Decision 97/462/EC of 27 June 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards wood-based panels;
(k)Commission Decision 97/463/EC of 27 June 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards plastic anchors for use in concrete and masonry;
(l)Commission Decision 97/555/EC of 14 July 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards cements, building limes and other hydraulic binders;
(m)Commission Decision 97/556/EC of 14 July 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards external thermal insulation composite systems/kits with rendering (ETICS);
(n)Commission Decision 97/597/EC of 14 July 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards reinforcing and prestressing steel for concrete;
(o)Commission Decision 97/638/EC of 19 September 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards fasteners for structural timber;
(p)Commission Decision 97/740/EC of 14 October 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards masonry and related products;
(q)Commission Decision 97/808/EC of 20 November 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards floorings;
(r)Commission Decision 98/143/EC of 3 February 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards systems of mechanically fastened flexible roof waterproofing membranes;
(s)Commission Decision 98/213/EC of 9 March 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards internal partition kits;
(t)Commission Decision 98/214/EC of 9 March 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards structural metallic products and ancillaries;
(u)Commission Decision 98/279/EC of 5 December 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards non load-bearing permanent shuttering kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete;
(v)Commission Decision 98/436/EC of 22 June 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards roof coverings, rooflights, roof windows and ancillary products;
(w)Commission Decision 98/437/EC of 30 June 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards internal and external wall and ceiling finishes;
(x)Commission Decision 98/456/EC of 3 July 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards post-tensioning kits for the prestressing of structures;
(y)Commission Decision 98/598/EC of 9 October 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards aggregates;
(z)Commission Decisions 98/599/EC of 12 October 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards liquid applied roof waterproofing kits;
(aa)Commission Decision 98/600/EC of 12 October 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards self-supporting translucent roof kits (except glass-based kits);
(bb)Commission Decision 98/601/EC of 13 October 1998 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards road construction products;
(cc)Commission Decision 1999/ 89/ EC of 25 January 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards prefabricated stair kits;
(dd)Commission Decision 1999/90/EC of 25 January 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards membranes;
(ee)Commission Decision 1999/91/EC of 25 January 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards thermal insulating products;
(ff)Commission Decision 1999/92/EC of 25 January 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards light composite wood-based beams and columns;
(gg)Commission Decision 1999/93/EC of 25 January 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards doors, windows, shutters, blinds, gates and related building hardware;
(hh)Commission Decision 1999/94/EC of 25 January 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards precast normal/lightweight/autoclaved aerated concrete products;
(ii)Commission Decision 1999/454/EC of 22 June 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards fire stopping, fire sealing and fire protective products;
(jj)Commission Decision 1999/455/EC of 22 June 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards timber frame and log prefabricated building kits;
(kk)Commission Decision 1999/469/EC of 25 June 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards products related to concrete, mortar and grout;
(ll)Commission Decision 1999/470/EC of 29 June 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards construction adhesives;
(mm)Commission Decision 1999/471/EC of 29 June 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards space heating appliances;
(nn)Commission Decision 1999/472/EC of 1 July 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards pipes, tanks and ancillaries not in contact with water intended for human consumption;
(oo)Commission Decision 2000/245/EC of 2 February 2000 on the procedure for attesting the conformity of construction products pursuant to Article 20(4) of Council Directive 89/106/EEC as regards flat glass, profiled glass and glass block products;
(pp)Commission Decision 2000/273/EC of 27 March 2000 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards seven products for European Technical Approvals without Guideline;
(qq)Commission Decision 2000/447/EC of 13 June 2000 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels;
(rr)Commission Decision 2000/606/EC of 26 September 2000 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards six products for European Technical Approvals without Guideline;
(ss)Commission Decision 2001/19/EC of 20 December 2000 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards expansion joints for road bridges;
(tt)Commission Decision 2001/308/EC of 31 January 2001 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards ventures;
(uu)Commission Decision 2002/359/EC of 13 May 2002 on the procedure for attesting the conformity of construction products in contact with water intended for human consumption, pursuant to Article 20(2) of Council Directive 89/106/EEC;
(vv)Commission Decision 2003/639/EC of 4 September 2003 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards pins for structural joints;
(ww)Commission Decision 2003/640/EC of 4 September 2003 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards kits for exterior wall claddings;
(xx)Commission Decision 2003/655/EC of 12 September 2003 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards watertight covering kits for wetroom floors and walls;
(yy)Commission Decision 2003/656/EC of 12 September 2003 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards seven products for European technical approvals without Guideline;
(zz)Commission Decision 2003/722/EC of 6 October 2003 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as liquid-applied bridge deck waterproofing kits;
(aaa)Commission Decision 2003/728/EC of 3 October 2003 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards metal frame building kits, concrete frame building kits, prefabricated building units, cold storage room kits and rock-fall protection kits;
(bbb)Commission Decision 2005/484/EC of 4 July 2005 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards cold storage building kits and cold storage building envelope kits;
(ccc)Commission Decision 2011/19/EU of 14 January 2011 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards sealants for non-structural use in joints in buildings and pedestrian walkways;
(ddd)Commission Decision 2011/284/EU of 12 May 2011 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards power, control and communication cables.
Textual Amendments
F3Words in Sch. 3 para. 2(1) inserted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(c)
F4Words in Sch. 3 para. 2(1)(d) substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(d)
F5Words in Sch. 3 para. 2(1)(e) substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(e)
Commencement Information
I2Sch. 3 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
3. F6... Commission Decision 96/603/EC of 4 October 1996 establishing the list of products belonging to Classes A ‘No contribution to fire’ provided for in Decision 94/611/EC implementing Article 20 of Council Directive 89/106/EEC on construction products [F7has effect, in relation to England and Wales, and Scotland, as if Article 2 were omitted].
Textual Amendments
F6Word in Sch. 3 para. 3 omitted (31.12.2020 immediately before S.I. 2019/465 comes into force) by virtue of The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(f)
F7Words in Sch. 3 para. 3 substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(f)
Commencement Information
I3Sch. 3 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
4.—(1) [F8The] relevant Commission Decisions, [F8have effect, in relation to England and Wales, and Scotland, as if Article 3 were omitted].
(2) The “relevant Commission Decisions” are—
(a)Commission Decision 2005/403/EC of 25 May 2005 establishing the classes of external fire performance of roofs and roof coverings for certain construction products as provided for by Council Directive 89/106/EEC;
(b)Commission Decision 2005/610/EC of 9 August 2005 establishing the classes of reaction-to-fire performance for certain construction products.
Textual Amendments
F8Words in Sch. 3 para. 4(1) substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(g)
Commencement Information
I4Sch. 3 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
5.—(1) [F9The] relevant Commission Decisions [F9have effect, in relation to England and Wales, and Scotland, as if Article 4 were omitted] .
(2) The “relevant Commission Decisions” are—
(a)Commission Decision 2003/43/EC of 17 January 2003 establishing the classes of reaction-to-fire performance for certain construction products;
(b)Commission Decision 2006/213/EC of 6 March 2006 establishing the classes of reaction-to-fire performance for certain construction products as regards wood flooring and solid wood panelling and cladding;
(c)Commission Decision 2006/600/EC of 4 September 2006 establishing the classes of reaction-to-fire performance for certain construction products as regards double skin metal faced sandwich panels for roofs;
(d)Commission Decision 2010/81/EU of 9 February 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards adhesives for ceramic tiles;
(e)Commission Decision 2010/82/EU of 9 February 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards decorative wallcoverings in roll and panel form;
(f)Commission Decision 2010/83/EU of 9 February 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards air drying jointing compounds;
(g)Commission Decision 2010/85/EU of 9 February 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards cementitious screeds, calcium sulphate screeds and synthetic resin floor screeds;
(h)Commission Decision 2010/737/EU of 2 December 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards steel sheets with polyester coating and with plastisol coating;
(i)Commission Decision 2010/738/EU of 2 December 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards fibrous gypsum plaster casts.
Textual Amendments
F9Words in Sch. 3 para. 5(1) substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(h)
Commencement Information
I5Sch. 3 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
6.—(1) Commission Implementing Regulation (EU) No 1062/2013 of 30 October 2013 on the format of the European Technical Assessment for construction products is amended [F10, in relation to England and Wales, and Scotland,] as follows.
(2) In Article 1, for “European” substitute “ UK ”.
(3) Omit Article 2.
(4) In the Annex—
(a)for “European”, in each place it occurs, substitute “ UK ”;
(b)for “EAD”, in both places, substitute “ UKAD ”.
Textual Amendments
F10Words in Sch. 3 para. 6(1) inserted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(i)
Commencement Information
I6Sch. 3 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
7.—(1) [F11The] relevant Commission Delegated Regulations [F12have effect, in relation to England and Wales, and Scotland, as if in Article 2] the words from “This Regulation shall be binding” to the end of the sentence [F13were omitted] .
(2) The “relevant Commission Delegated Regulations” are—
(a)Commission Delegated Regulation (EU) No 157/2014 of 30 October 2013 on the conditions for making a declaration of performance on construction products available on a website;
(b)Commission Delegated Regulation (EU) No 1291/2014 of 16 July 2014 on the conditions for classification, without testing, of wood-based panels under EN 13986 and solid wood panelling and cladding under EN 14915 with regard to their fire protection ability, when used for wall and ceiling covering;
(c)Commission Delegated Regulation (EU) No 1292/2014 of 17 July 2014 on the conditions for classification, without testing, of certain uncoated wood floorings under EN 14342 with regard to their reaction to fire;
(d)Commission Delegated Regulation (EU) No 1293/2014 of 17 July 2014 on the conditions for classification, without testing, of metal lath and beads for internal plastering covered by the harmonised standard EN 13658-1, metal lath and beads for external rendering covered by the harmonised standard EN 13658-2 and metal beads and feature profiles covered by the harmonised standard EN 14353, with regard to their reaction to fire;
(e)Commission Delegated Regulation (EU) 2017/959 of 24 February 2017 on the classification of horizontal settlement and short-term water absorption performance for in situ formed loose fill cellulose (LFCI) thermal insulation products under EN 15101-1 pursuant to Regulation (EU) No 305/2011 of the European Parliament and of the Council;
(f)Commission Delegated Regulation (EU) 2017/1228 of 20 March 2017 on the conditions for classification, without testing, of external renders and internal plasters based on organic binders covered by the harmonised standard EN 15824 and rendering and plastering mortars covered by the harmonised standard EN 998-1 with regard to their reaction to fire;
(g)Commission Delegated Regulation (EU) 2017/1475 of 26 January 2017 on the classification of frost resistance performance for clay tiles under EN 1304 pursuant to Regulation (EU) No 305/2011 of the European Parliament and of the Council;
(h)Commission Delegated Regulation (EU) 2017/2293 of 3 August 2017 on the conditions for classification, without testing, of cross laminated timber products covered by the harmonised standard EN 16351 and laminated veneer lumber products covered by the harmonised standard EN 14374 with regard to their reaction to fire.
Textual Amendments
F11Word in Sch. 3 para. 7(1) substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(j)(i)
F12Words in Sch. 3 para. 7(1) substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(j)(ii)
F13Words in Sch. 3 para. 7(1) inserted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(j)(iii)
Commencement Information
I7Sch. 3 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
8. F14... Commission Delegated Regulation (EU) 2016/364 of 1 July 2015 on the classification of the reaction to fire performance of construction products pursuant to Regulation (EU) No 305/2011 of the European Parliament and of the Council [F15has effect, in relation to England and Wales, and Scotland, as if in Article 3] omit the words from “This Regulation shall be binding” to the end of the sentence [F16were omitted].U.K.
Textual Amendments
F14Word in Sch. 3 para. 8 omitted (31.12.2020 immediately before S.I. 2019/465 comes into force) by virtue of The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(k)(i)
F15Words in Sch. 3 para. 8 substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(k)(ii)
F16Words in Sch. 3 para. 8 inserted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(k)(iii)
Commencement Information
I8Sch. 3 para. 8 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
9. F17... Commission Delegated Regulation (EU) 2017/1227 of 20 March 2017 on the conditions for classification, without testing, of glued laminated timber products covered by the harmonised standard EN 14080 and structural finger jointed solid timber products covered by the harmonised standard EN 15497 with regard to their reaction to fire and amending Decision 2005/610/EC [F18has effect, in relation to England and Wales, and Scotland, as if in Article 3] the words from “This Regulation shall be binding” to the end of the sentence [F19were omitted].U.K.
Textual Amendments
F17Word in Sch. 3 para. 9 omitted (31.12.2020 immediately before S.I. 2019/465 comes into force) by virtue of The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(l)(i)
F18Words in Sch. 3 para. 9 substituted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(l)(ii)
F19Words in Sch. 3 para. 9 inserted (31.12.2020 immediately before S.I. 2019/465 comes into force) by The Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1359), regs. 1, 3(4)(l)(iii)
Commencement Information
I9Sch. 3 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1