The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 No. 696

SCHEDULE 21 E+W+S Amendment of the Simple Pressure Vessels (Safety) Regulations 2016

Amendment to Schedule 2 E+W+S

40.  Schedule 2 (conformity assessment procedures) is amended as follows—

(a) in the heading, omit “EU-”;

(b) in paragraphs 1, 7(1), 8(3) to (5), 11(2) and 15(2) for “a notified” substitute “ an approved ”;

(c) in all places in which it occurs (other than those referred to in sub-paragraph (b)) for “notified” substitute “ approved ”;

(d) in paragraph 6(1) and (3) for “an EU-Type” substitute “ a Type ”;

(e) in all places in which it occurs (other than the paragraphs referred to in sub-paragraph (d)) for “EU-Type” substitute “ Type ”;

(f) in paragraphs 2(2)(e)(i), 3(1)(c)(iv) and (v) and 16(2) for “harmonised” substitute “ designated ”;

(g) in paragraph 3(c)(iv) omit “, the references to which have been published in the Official Journal”;

(h) in paragraph 8(3) for “Commission, the member States” substitute “ Secretary of State ”;

(i) in paragraph 8(4), for “Commission and the member States” substitute “ Secretary of State ”;

(j) in paragraph 12(3) for “Member State in which the test is performed” substitute “ Secretary of State ”;

(k) in paragraphs 12(9) and 16(6) omit “other Member States and the Commission,”;

(l) for the headings to paragraphs 13, 17 and 20 substitute— “ UK marking and declaration of conformity ”;

(m) in paragraphs 13, 17 and 20—

(i) for “CE” substitute “ UK ”; and

(ii) for “EU declaration” substitute “ declaration ” in each place in which it occurs; and

(n) in paragraph 18 for “the Directive” substitute “ these Regulations ”.

Commencement Information

I1 Sch. 21 para. 40 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1