Chwilio Deddfwriaeth

Chwiliad Uwch

The Road Vehicles (Approval) Regulations 2020

Help about what version

Pa Fersiwn

Help about advanced features

Nodweddion Uwch

Changes to legislation:

The Road Vehicles (Approval) Regulations 2020, PART 2 is up to date with all changes known to be in force on or before 12 July 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to Part 2:

PART 2U.K.[F1Type-approval]

Textual Amendments

Appointment of approval authorityU.K.

3.  The Secretary of State is the approval authority for the purposes of these Regulations [F2, the Type Approval Regulation and the EU Type Approval Regulation].

Textual Amendments

Commencement Information

I1Reg. 3 in force at 1.9.2020, see reg. 1(b)

Market surveillance authorityU.K.

4.  The Secretary of State is the market surveillance authority for the purposes of—

(a)these Regulations [F3, the Type Approval Regulation and the EU Type Approval Regulation], F4...

(b)where applied by the Type Approval Regulation or otherwise applicable to relevant products, Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 M1[F5, and

(c)where applied by the EU Type Approval Regulation, or otherwise applicable to relevant products, Regulation (EU) 2019/1020 on market surveillance and compliance of products, as that Regulation has effect by virtue of the Northern Ireland Protocol.]

Textual Amendments

Commencement Information

I2Reg. 4 in force at 1.9.2020, see reg. 1(b)

Marginal Citations

M1OJ No. L 218, 13.8.2008, p.30.

Requirement to supply documentation or additional information: failure to complyU.K.

5.  Where a manufacturer who makes an application for type approval fails to comply with a requirement to supply documentation or additional information under the second subparagraph of paragraph 4 of Article 25 of the Type Approval Regulation [F6or of the EU Type Approval Regulation], the approval authority may treat the application as having been withdrawn by the manufacturer.

Textual Amendments

Commencement Information

I3Reg. 5 in force at 1.9.2020, see reg. 1(b)

Refusal of F7... type-approval applicationU.K.

6.—(1) The approval authority must refuse an [F8application for a GB type-approval or a UK (NI) type-approval] if the requirements of—

(a)Articles 26 and 29 to 31, or

(b)Article 39,

of the Type Approval Regulation [F9or the EU Type Approval Regulation, as applicable,] have not been complied with.

(2) The requirements of Article 30 of the Type Approval Regulation [F10or the EU Type Approval Regulation, as applicable] are not complied with if the tests required by that Article demonstrate that there is non-compliance with the technical requirements mentioned in paragraph 1 of that Article.

(3) The requirements of Article 31 of the Type Approval Regulation [F11or the EU Type Approval Regulation, as applicable] are not complied with if the approval authority is not satisfied that the applicant has made or will make adequate arrangements to ensure that—

(a)production will conform to the approved type, or

(b)the data in the certificates of conformity are correct.

Textual Amendments

Commencement Information

I4Reg. 6 in force at 1.9.2020, see reg. 1(b)

[F12Reusability, recycling and recovery of component parts and materialsU.K.

6A.—(1) For the purposes of a GB type-approval, references in the following provisions of Annex II to the Type Approval Regulation to “Directive 2005/64/EC of the European Parliament and of the Council” are to be read as references to Schedule A1—

(a)entry 59 of the table in Part 1;

(b)entry 59 of table 1 in Appendix 1 to Part 1;

(c)entry 59 of table 2 in Appendix 1 to Part 1.

(2) Schedule A1 applies to vehicles belonging to categories M1 and N1, as defined in Article 4 of the Type Approval Regulation.]

Textual Amendments

Conformity of production: record keepingU.K.

7.—[F13(1)] The holder of [F14an approval referred to in paragraph (2)], must compile and retain for inspection by the approval authority for a period of five years commencing with the date of compilation, such records of tests and checks undertaken that are sufficient to demonstrate—

(a)conformity of production to the approved type,

(b)compliance of certificates of conformity to Article 36 or Article 37 of the Type Approval Regulation [F15or the EU Type Approval Regulation], and

(c)that the data in certificates of conformity issued by the holder are correct.

[F16(2) The approvals referred to in this paragraph are—

(a)a GB type-approval;

(b)an EU type-approval issued by the Secretary of State before IP completion day;

(c)a UK (NI) type-approval;

(d)a national small series type-approval issued by the Secretary of State before IP completion day;

(e)a UK (NI) national small series type-approval;

(f)a GB small series type-approval.]

Textual Amendments

Commencement Information

I5Reg. 7 in force at 1.9.2020, see reg. 1(b)

Review of decisionsU.K.

8.—(1) All decisions taken pursuant to the Type Approval Regulation [F17or the EU Type Approval Regulation] and all decisions refusing or withdrawing type approval, refusing registration, prohibiting or restricting the placing on the market, registration or entry into service of a vehicle or requiring withdrawal of a vehicle from the market must be given by notice in writing (“a relevant notice”) and state—

(a)in detail the reasons on which they are based,

[F18(b)the remedies available to the party concerned—

(i)where the application is made in respect of Great Britain, under the laws in force in Great Britain;

(ii)where the application is made in respect of Northern Ireland, under the laws in force in Northern Ireland,] and

(c)the time limits allowed for the exercise of such remedies.

(2) Where the approval authority has given a person a relevant notice, that person may apply to the approval authority for a reconsideration of the decision given in that notice.

(3) An application under paragraph (2) must—

(a)be made within the period of 28 days beginning on the date when the relevant notice is received, and

(b)state the reasons for making the application and be accompanied by such further evidence as the person believes supports those reasons.

(4) The approval authority may—

(a)request evidence in support of the application,

(b)after giving reasonable notice to the applicant, carry out a re-examination of one or more vehicles for the purpose of determining the issues raised by the application.

(5) The approval authority must as soon as reasonably practicable—

(a)give written notification to the applicant stating whether the decision is confirmed, amended or reversed, and

(b)if the decision is reversed or amended, take the appropriate action in respect of the revised decision.

(6) An applicant aggrieved by the approval authority's notification under paragraph (5) may by notice request the approval authority to appoint an independent assessor to review the decision to which the relevant notice relates.

(7) A request under paragraph (6) must—

(a)be made not later than 28 days after receipt of the approval authority's notification under paragraph (5), and

(b)state the reasons for the request.

(8) As soon as reasonably practicable after the date of receipt of the request under paragraph (6), the approval authority must—

(a)appoint a person to act as assessor or, at the authority's discretion, not more than three persons to act as an assessment panel, and

(b)notify the applicant of the appointment.

(9) The independent assessor or assessment panel may—

(a)request further evidence in support of the request for review;

(b)after giving reasonable notice to the applicant, carry out a re-examination of one or more vehicles for the purpose of determining the issues raised by the request for review.

Textual Amendments

Commencement Information

I6Reg. 8 in force at 1.9.2020, see reg. 1(b)

Withdrawal of approvals: mistake or errorU.K.

9.—(1) Subject to the provisions of this regulation, the approval authority may decide to withdraw any approval given by it by reason of mistake or error on the part of that authority.

(2) A decision to withdraw an approval must be given by notice in writing (“a relevant notice”) and specify—

(a)the nature of the mistake or error, and

(b)the date from which the approval is to be withdrawn, which must be not less than 28 days nor more than six months after the date on which the relevant notice is given.

(3) Regulation 8(2) to (9) applies to the review of a decision under this regulation.

(4) Any review of a decision under this regulation may, subject to the requirement in paragraph (2)(b), vary the date from which the approval is to be withdrawn.

Commencement Information

I7Reg. 9 in force at 1.9.2020, see reg. 1(b)

Withdrawal and suspension of approvals: effectU.K.

10.—(1) If the holder of an approval which has been withdrawn or suspended pursuant to the Type Approval Regulation [F19, the EU Type Approval Regulation] or these Regulations purports by virtue of that approval to—

(a)issue a certificate of conformity with respect to a vehicle, or

(b)affix a statutory plate or mark pursuant to Article 38 of the Type Approval Regulation [F20or the EU Type Approval Regulation, as applicable],

the certificate, plate or mark is invalid.

(2) The approval authority may, by notice given to the holder, exempt from paragraph (1) certificates of conformity or classes of certificates of conformity specified in the notice.

(3) The suspension of an approval does not affect the validity of any certificate of conformity issued under it before that suspension.

Textual Amendments

Commencement Information

I8Reg. 10 in force at 1.9.2020, see reg. 1(b)

ServiceU.K.

11.—(1) Paragraphs (2) to (4) of this regulation have effect in relation to any notice or other document required or authorised by these Regulations [F21, the Type Approval Regulation or the EU Type Approval Regulation] to be given to or served on any person by the approval authority, market surveillance authority or enforcement authority.

(2) Any such notice or document may be given to or served on the person in question—

(a)by delivering it to the person;

(b)by leaving it at that person's proper address;

(c)by sending it by post to that person at that address;

(d)by means of any form of electronic communication agreed with the person to whom it is to be sent.

(3) Any such notice or document may—

(a)in the case of a body corporate, be given to or served on an officer of that body;

(b)in the case of a partnership, be given to or served on any partner;

(c)in the case of an unincorporated association other than a partnership, be given to or served on any member of the governing body of that association.

(4) For the purposes of this regulation and section 7 of the Interpretation Act 1978 (service of documents by post) M2 in its application to this regulation, the proper address of any person is that person's last known address (whether of the person's residence or of a place where the person carries on business or is employed) and also—

(a)in the case of a body corporate or an officer of that body, the address of the registered or principal office of that body in the United Kingdom;

(b)in the case of an unincorporated association other than a partnership or a member of its governing body, its principal office in the United Kingdom;

(c)an address within the United Kingdom other than that person's proper address at which that person, or another acting on that person's behalf, will accept service of any notice or document required or authorised by these Regulations [F22, the Type Approval Regulation or the EU Type Approval Regulation] to be given to or served on any person by the approval authority.

(5) Any notice or other document or information required by these Regulations [F23, the Type Approval Regulation or the EU Type Approval Regulation] to be given to or served by any person on the approval authority, market surveillance authority or enforcement authority must be—

(a)in writing, or

(b)in an electronic format accepted by, and sent by means of any form of electronic communication agreed with, the approval authority, market surveillance authority or enforcement authority (as appropriate).

Textual Amendments

Commencement Information

I9Reg. 11 in force at 1.9.2020, see reg. 1(b)

Marginal Citations

Provision of testing stationsU.K.

12.  The approval authority may provide and maintain stations where examinations of relevant products may be carried out for the purposes of these Regulations [F24, the Type Approval Regulation or the EU Type Approval Regulation] and may provide and maintain apparatus for carrying out such examinations.

Textual Amendments

Commencement Information

I10Reg. 12 in force at 1.9.2020, see reg. 1(b)

Provision of technical information: loss or damageU.K.

13.—(1) Where a duty is imposed on a manufacturer by Chapter XIII (provision of technical information) or Chapter XIV (access to vehicle OBD information and vehicle repair and maintenance information) of the Type Approval Regulation [F25or the EU Type Approval Regulation], any breach of the duty which causes a person to sustain loss or damage is actionable at the suit of that person.

(2) But, in any proceedings brought against a manufacturer in pursuance of this regulation, it is a defence for the manufacturer to show that the manufacturer took all reasonable steps and exercised all due diligence to avoid the breach.

Textual Amendments

Commencement Information

I11Reg. 13 in force at 1.9.2020, see reg. 1(b)

Defeat systemsU.K.

14.—(1) A person who is a manufacturer commits an offence if a motor vehicle manufactured by that person—

(a)is placed on the market or registered in [F26Great Britain or, as the case may be, Northern Ireland, and]

(b)that motor vehicle is fitted with a defeat system which is not permitted.

(2) A separate offence under paragraph (1) is committed in respect of each such motor vehicle placed on the market or registered.

(3) A defeat system is not permitted unless—

(a)in the case of a motor vehicle [F27which is of a type approved in accordance with Regulation (EC) 595/2009 or EU Regulation (EC) 595/2009], the fitting and operation of the defeat system is explained in the extended documentation package submitted by the manufacturer to the approval authority [F28or the approval authority of a member State] (as defined in Article 3(36) of the [F29EU Type Approval Regulation]) when applying for emissions type approval for that vehicle, or

(b)in the case of a motor vehicle [F30which is of a type approved in accordance with Regulation (EC) 715/2007 or EU Regulation (EC) 715/2007]—

(i)its use falls within one of the exceptions listed in Article 5(2)(a) to (c) of [F31the Regulation in accordance with which the type was approved], and

(ii)in respect of a motor vehicle submitted for emissions type approval after 16th May 2016, the fitting and operation of the defeat system is explained in the documentation package submitted by the manufacturer to the approval authority [F32or the approval authority of a member State] (as defined in Article 3(36) of the [F33EU Type Approval Regulation]) when applying for emissions type approval for that vehicle.

(4) Where, following examination of motor vehicles associated with [F34an applicable type-approval], the approval authority is satisfied that two or more of those motor vehicles—

(a)are vehicles for which [F35a] certificate of conformity has been issued in respect of that approval, and

(b)are fitted with a defeat system which is not permitted,

each motor vehicle associated with [F36that applicable type-approval] is to be taken to be similarly fitted with a defeat system which is not permitted unless proved otherwise by the manufacturer.

[F37(5) In paragraph (4)—

(a)“applicable type approval” means—

(i)an EU whole-vehicle type approval or an EU small series type-approval, whether or not issued by the Secretary of State, or

(ii)a GB whole-vehicle type-approval or a GB medium series type-approval;

(b)a motor vehicle is associated with an applicable type approval if a certificate of conformity relating to that type approval has been issued in respect of that vehicle.]

(6) A person who breaches a prohibition in paragraphs 9(1), (2) or 10(10) of Schedule 4 commits an offence.

(7) In this regulation—

“Commission Regulation (EC) No 692/2008” means Commission Regulation (EC) No 692/2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information M3;

“Commission Regulation (EC) No 582/2011” means Commission Regulation (EC) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council M4;

“Commission Regulation (EU) 2017/1151” means Commission Regulation (EU) 2017/1151 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information M5;

“defeat system” means—

(a)

in the case of a motor vehicle to which Regulation (EC) 595/2009 applies—

(i)

where the engine system or engine family meets the conditions specified in Article 6(1a) of Commission Regulation (EC) No 582/2011, a “defeat strategy” as defined in paragraph 2 of UNECE Regulation 49;

(ii)

in all other cases, a “defeat strategy” as defined in Article 3(8) of Regulation (EC) 595/2009,

at the time of applying for emissions type approval for that vehicle;

(b)

in the case of a motor vehicle to which Regulation (EC) 715/2007 applies—

(i)

where, pursuant to Article 6(1) of Commission Regulation (EC) No 692/2008, the motor vehicle meets the requirements of Regulation (EC) 715/2007 by virtue of compliance with UNECE Regulation 83, a “defeat device” as defined in paragraph 2 of that UNECE Regulation;

(ii)

in all other cases, a “defeat device” as defined in Article 3(10) of Regulation (EC) 715/2007,

at the time of applying for emissions type approval for that vehicle;

(c)

[F38in the case of a motor vehicle to which EU Regulation (EC) 595/2009 applies—

(i)

where the engine system or engine family meets the conditions specified in Article 6(1a) of EU Commission Regulation (EU) No 582/2011, a “defeat strategy” as defined in paragraph 2 of UNECE Regulation 49;

(ii)

in all other cases, a “defeat strategy” as defined in Article 3(8) of EU Regulation (EC) 595/2009,

at the time of applying for emissions type-approval for that vehicle;

(d)

in the case of a motor vehicle to which EU Regulation (EC) 715/2007 applies—

(i)

where, pursuant to Article 6(1) of EU Commission Regulation (EC) No 692/2008, the motor vehicle meets the requirements of EU Regulation (EC) 715/2007 by virtue of compliance with UNECE Regulation 83, a “defeat device” as defined in paragraph 2 of that UNECE Regulation;

(ii)

in all other cases, a “defeat device” as defined in Article 3(10) of EU Regulation (EC) 715/2007,

at the time of applying for emissions type-approval for that vehicle;]

“emissions type approval” means F39... type approval in accordance with [F40Regulation (EC) 715/2007, EU Regulation (EC) 715/2007, Regulation (EC) 595/2009 or EU Regulation (EC) 595/2009] (as appropriate) in respect of tailpipe emissions and evaporative emissions for a motor vehicle;

[F41“EU Commission Regulation (EC) No 692/2008” means Commission Regulation (EC) No 692/2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and EURO 6) and on access to vehicle repair and maintenance information, as that Regulation has effect in EU law and by virtue of the Northern Ireland Protocol;]

[F41“EU Commission Regulation (EU) No 582/2011” means Commission Regulation (EC) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council, as that Regulation has effect in EU law and by virtue of the Northern Ireland Protocol;]

[F41“EU Commission Regulation (EU) 2017/1151” means Commission Regulation (EU) 2017/1151 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, as that Regulation has effect in EU law and by virtue of the Northern Ireland Protocol;]

[F41“EU Regulation (EC) 715/2007” means Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, as that Regulation has effect in EU law and by virtue of the Northern Ireland Protocol;]

[F41“EU Regulation (EC) 595/2009” means Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and access to vehicle repair and maintenance information, as that Regulation has effect in EU law and by virtue of the Northern Ireland Protocol;]

“extended documentation package” means—

(a)

in the case of a motor vehicle to which Regulation (EC) 715/2007 applies, the extended documentation package mentioned in—

(i)

Article 5(11) of Commission Regulation (EC) No 692/2008 M6; or

(ii)

Article 5(11) of Commission Regulation (EU) 2017/1151;

(b)

in the case of a motor vehicle to which Regulation (EC) 595/2009 applies, the extended documentation package specified in Article 5(3) of, and Section 8 of Annex I to, Commission Regulation (EC) No 582/2011;

(c)

[F42in the case of a motor vehicle to which EU Regulation (EC) 715/2007 applies, the extended documentation package mentioned in—

(i)

Article 5(11) of EU Commission Regulation (EC) No 692/2008; or

(ii)

Article 5(11) of EU Commission Regulation (EU) 2017/1151;

(d)

in the case of a motor vehicle to which EU Regulation (EC) 595/2009 applies, the extended documentation package specified in Article 5(3) of, and Section 8 of Annex 1 to, EU Commission (EC) No 582/2011;]

“placed on the market” means supplying or making available, whether in return for payment or free of charge, to a third party, and includes exposure for sale to a third party;

“registered” means registered pursuant to section 21 of the 1994 Act;

“Regulation (EC) 715/2007” means Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) M7;

“Regulation (EC) 595/2009” means Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) M8.

Textual Amendments

Commencement Information

I12Reg. 14 in force at 1.9.2020, see reg. 1(b)

Marginal Citations

M3OJ No. L 199, 28.7.2008, p. 1.

M4OJ No. L 167, 25.6.2011, p. 1.

M5OJ No. L 175, 7.7.2017, p. 1.

M6Paragraph 11 was inserted by Commission Regulation (EU) 2016/646 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) (OJ No. L 109, 26.4.2016, p. 1).

M7OJ No. L 171, 29.6.2007, p. 1.

M8OJ No. L 188, 18.7.2009, p. 1.

Yn ôl i’r brig

Options/Help

Print Options

You have chosen to open yr Offeryn Cyfan

Yr Offeryn Cyfan you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.

Close

Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys

Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Memorandwm Esboniadol

Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel deddfwyd fersiwn a ddefnyddiwyd am y copi print
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel gwnaed fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill