- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EU) 2019/1892Show full title
Commission Regulation (EU) 2019/1892 of 31 October 2019 amending Regulation (EU) No 1230/2012 as regards type-approval requirements for certain motor vehicles fitted with elongated cabs and for aerodynamic devices and equipment for motor vehicles and their trailers (Text with EEA relevance)
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for: ANNEX II
Changes to legislation:
Commission Regulation (EU) 2019/1892, ANNEX II is up to date with all changes known to be in force on or before 17 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Changes and effects yet to be applied to Annex II:
- Regulation implicit repeal by EUR 2019/2144 Regulation
ANNEX IIU.K.
Annex V to Regulation (EU) No 1230/2012 is amended as follows:
(1)
Part A is amended as follows:
(a)
the title is replaced by the following:
‘PART AU.K. EC type-approval of motor vehicles and their trailers with regard to the masses and dimensions of a vehicle INFORMATION DOCUMENT MODEL’
(b)
the following point 2.4.2.1.3. is inserted:
2.4.2.1.3.Elongated cab complying to Article 9a of Directive 96/53/EC: yes/no(1)U.K.
(c)
the following point 2.6.4. is inserted:
2.6.4.Additional mass for alternative propulsion: … kgU.K.
(d)
the following point 3.9. is inserted:
3.9.List of equipment to for alternative propulsion (and indication of the mass of the parts): …U.K.
(e)
the following points 9.25. to 9.27.3. are inserted:
9.25.Elongated Cabs complying to Article 9a of Directive 96/53/ECU.K.
9.25.1.Detailed technical description (including photographs and drawings, as well as description of the materials) of the vehicle parts relevant to Part C, point 1.4 of Annex I to Regulation (EU) No 1230/2012: …U.K.
9.26.Aerodynamic device or equipment on the front of the vehicleU.K.
9.26.1.Vehicle equipped with aerodynamic device or equipment on the front: yes/no(1)U.K.
9.26.2.Type-approval number of the aerodynamic device or equipment, if available: … or, if not available:U.K.
9.26.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipmentU.K.
9.26.3.1.Construction and materials: …U.K.
9.26.3.2.Locking and adjustment system: …U.K.
9.26.3.3.Attachment and mounting to the vehicle: …U.K.
9.27.Aerodynamic device or equipment on the rear of the vehicleU.K.
9.27.1.Vehicle equipped with aerodynamic device or equipment on the rear: yes/no(1)U.K.
9.27.2.Type-approval number of the aerodynamic device or equipment, if available ... or, if not available:U.K.
9.27.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipmentU.K.
9.27.3.1.Construction and materials: …U.K.
9.27.3.2.Locking and adjustment system: …U.K.
9.27.3.3.Attachment and mounting to the vehicle: …U.K.
(2)
Part B is amended as follows:
(a)
the title is replaced by the following:
‘PART BU.K. EC type-approval certificate of motor vehicles and their trailers with regard to the masses and dimensions of vehicles MODELFormat: A4 (210 × 297 mm) EC TYPE-APPROVAL CERTIFICATE’;
(b)
the words “with regard to Regulation (EU) No. …/…” are replaced by the words ‘with regard to Regulation (EU) No 1230/2012, as last amended by Regulation (EU) 2019/1892’;
(c)
the Addendum is replaced by the following:
‘Addendum to EC type-approval certificate No ...
1.Derogations
1.1.The vehicle has been type-approved in accordance with Article 6(1) of this Regulation (i.e. the outermost dimensions of the vehicle exceeds the maximum dimensions mentioned in Part A, B, C or D of Annex I): yes/no(3)
1.2.The vehicle has been type-approved for the purposes of Article 8b of Directive 96/53/EC (i.e. aerodynamic devices or equipment at the rear of the vehicle): yes/no(3)
1.3.The vehicle has been type-approved for the purposes of with Article 9a of Directive 96/53/EC (i.e. an elongated cab or a cab fitted with aerodynamic devices or equipment): yes/no(3)
1.4.The vehicle has been type-approved for the purposes of Article 10b of Directive 96/53/EC:
1.4.1.Additional weight of alternatively fuelled vehicles: yes/no(3)
1.4.2.Additional weight of zero-emission vehicles: yes/no(3)
2.The vehicle is fitted with air-suspension: yes/no(3)
3.The vehicle is fitted with a suspension recognised to be equivalent to air-suspension: yes/no(3)
4.The vehicle fulfils the requirements for an off-road vehicle: yes/no(3)
5.Remarks: …’’;
(3)
the following Parts C, D and E are added:
‘PART CU.K. EC type-approval of an aerodynamic device or equipment as a separate technical unit Information document MODEL
Information document No … relating to the EC type-approval of an aerodynamic device or equipment as a separate technical unit.
The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the separate technical units referred to in this information document have electronic controls, information concerning their performance shall also be supplied.
0.GENERAL
0.1.Make (trade name of manufacturer): …
0.2.Type: …
0.3.Means of identification of type, if marked on the separate technical unit (b): …
0.3.1.Location of that marking: …
0.5.Name and address of manufacturer: …
0.7.Location and method of affixing the EC type- approval mark: …
0.8.Name(s) and address(es) of assembly plant(s): …
0.9.Name and address of the manufacturer’s representative (if any): …
9.26.Aerodynamic device or equipment on the front of the vehicle
9.26.1.Vehicle equipped with aerodynamic device or equipment on the front: yes/no (1)
9.26.2.Type-approval number of the aerodynamic device or equipment, if available: … or, if not available:
9.26.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipment
9.26.3.1.Construction and materials: …
9.26.3.2.Locking and adjustment system: …
9.26.3.3.Attachment and mounting to the vehicle: …
9.27.Aerodynamic device or equipment on the rear of the vehicle
9.27.1.Vehicle equipped with aerodynamic device or equipment on the rear: yes/no (1)
9.27.2.Type-approval number of the aerodynamic device or equipment, if available ... or, if not available:
9.27.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipment
9.27.3.1.Construction and materials: …
9.27.3.2.Locking and adjustment system: …
9.27.3.3.Attachment and mounting to the vehicle: …
Explanatory notes
(b)If the means of identification of type contains characters not relevant to describe the separate technical unit type covered by this information document, such characters shall be represented in the documentation by the symbol “?” (e.g. ABC??123??).
(1)Delete where not applicable.
PART DU.K. EC type-approval certificate for an aerodynamic device or equipment as a separate technical unit MODELFormat: A4 (210 × 297 mm)EC TYPE-APPROVAL CERTIFICATE
Stamp of type-approval authority
Communication concerning:
| - EC type-approval (1) - extension of EC type-approval (1) - refusal of EC type-approval (1) - withdrawal of EC type-approval (1) |  | of a type of aerodynamic device or equipment as a separate technical unit |
with regard to Regulation (EU) No 1230/2012, as last amended by Regulation (EU) 2019/1892 (1)
EC type-approval number: …
Reason for extension: …
SECTION IU.K.
0.1.Make (trade name of manufacturer): …
0.2.Type: …
0.3.Means of identification of type, if marked on the separate technical unit(2): …
0.3.1.Location of that marking: …
0.5.Name and address of manufacturer: …
0.7.Location and method of affixing of the EC type-approval mark: …
0.8.Name(s) and address(es) of assembly plant(s): …
0.9.Name and address of the manufacturer’s representative (if any): …
SECTION IIU.K.
1.Additional information: see Addendum.
2.Technical service responsible for carrying out the tests: …
3.Date of test report: …
4.Number of test report: …
5.Remarks (if any): see Addendum.
6.Place: …
7.Date: …
8.Signature: …
Attachments: Information package
Test report
Addendum to EC type-approval certificate No ...
1.Brief description of the type of separate technical unit: …
2.Detailed description of the aerodynamic device or equipment:
2.1.Number of separate elements: …
2.2.Description of construction and materials: …
2.3.Description of locking and adjustment system: …
2.4.Description of attachment and mounting to the vehicle: …
2.5.Separate technical unit: semi-universal/vehicle specific (1)
3.List of specific vehicle types for which the separate technical unit has been approved (if applicable): …
4.Detailed description of the specific mounting area specifications on vehicles in case of semi-universal aerodynamic devices or equipment (if applicable): …
5.Remarks: …
6.Type-approval mark and its location: …
PART EU.K. EC separate technical unit type-approval mark
1.The EC separate technical unit type-approval mark shall consist of:
1.1.A rectangle surrounding the lower-case letter “e” followed by the distinguishing number of the Member State which has granted the EC separate technical unit type-approval:
| 1 | for Germany | 19 | for Romania |
| 2 | for France | 20 | for Poland |
| 3 | for Italy | 21 | for Portugal |
| 4 | for The Netherlands | 23 | for Greece |
| 5 | for Sweden | 24 | for Ireland |
| 6 | for Belgium | 25 | for Croatia |
| 7 | for Hungary | 26 | for Slovenia |
| 8 | for the Czech Republic | 27 | for Slovakia |
| 9 | for Spain | 29 | for Estonia |
| 11 | for the United Kingdom | 32 | for Latvia |
| 12 | for Austria | 34 | for Bulgaria |
| 13 | for Luxembourg | 36 | for Lithuania |
| 17 | for Finland | 49 | for Cyprus |
| 18 | for Denmark | 50 | for Malta |
1.2.In the vicinity of the rectangle the “base approval number” contained in Section 4 of the type-approval number preceded by the two figures indicating the sequence number assigned to this Regulation or latest major technical amendment to this Regulation. The sequence number is “00” at present.
1.3.In case of an aerodynamic device or equipment of cabs, the sequence number shall be preceded by the symbol “96/53/EC ARTICLE 9A COMPLIANT”.
1.4.In case of an aerodynamic device or equipment to be located on the rear of a vehicle, the sequence number shall be preceded by the symbol “96/53/EC ARTICLE 8B COMPLIANT”.
2.The EC separate technical unit type-approval mark shall be affixed to a main part of the aerodynamic device or equipment in such a way as to be indelible as well as clearly and easily legible even if the device is fitted to a vehicle.
3.An example of an EC separate technical unit type-approval mark is shown in Figure 1.
Figure 1 Example of EC separate technical unit type-approval mark
Explanatory note
The EC separate technical unit type-approval of an aerodynamic device or equipment to be installed at the rear of a vehicle (for the purpose of compliance with Article 8b of Directive 96/53/EC) was issued by Romania under number 0046. The first two digits “00” indicate that the separate technical unit was approved in accordance withthis Regulation.’
(1)
Delete where not applicable.
(2)
If the means of identification of type contains characters not relevant to describe the separate technical unit type covered by this information document, such characters shall be represented in the documentation by the symbol “?” (e.g. ABC??123??).
(3)
Delete where not applicable.
Options/Help
Print Options
PrintThe Whole Regulation
PrintThis Annex only
You have chosen to open the Whole Regulation
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
You have chosen to open Schedules only
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.