- Latest available (Revised)
- Point in Time (07/08/2020)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2020/1187 of 7 August 2020 granting a Union authorisation for the biocidal product family ‘Iodine based products – CID LINES NV’ (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 07/08/2020.
There are currently no known outstanding effects for the Commission Implementing Regulation (EU) 2020/1187, ANNEX.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Iodine based products – CID LINES NV
Product type 3 – Veterinary hygiene (Disinfectants)
Product type 4 – Food and feed area (Disinfectants)
Authorisation number: EU-0022265-0000
R4BP asset number: EU-0022265-0000
Name | Iodine based products – CID LINES NV |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) PT04 – Food and feed area (Disinfectants) |
Name and address of the authorisation holder | Name | CID LINES NV |
Address | Waterpoortstraat 2, 8900, Ieper, Belgium | |
Authorisation number | EU-0022265-0000 | |
R4BP asset number | EU-0022265-0000 | |
Date of the authorisation | 3 September 2020 | |
Expiry date of the authorisation | 31 August 2030 |
Name of manufacturer | CID LINES NV |
Address of manufacturer | Waterpoortstraat 2, 8900 Ieper Belgium |
Location of manufacturing sites | Waterpoortstraat 2, 8900 Ieper Belgium |
Active substance | Iodine |
Name of manufacturer | SQM S.A. |
Address of manufacturer | Los Militares, Piso 4, 4290 Santiago Chile |
Location of manufacturing sites | Nueva Victoria plant, 00 Pedro de Valdivia Chile |
Active substance | Iodine |
Name of manufacturer | Cosayach Nitratos S.A. |
Address of manufacturer | Amunategui 178, 00 Santiago Chile |
Location of manufacturing sites | Cala Cala, 00 Pozo Almonte Chile |
Active substance | Iodine |
Name of manufacturer | ACF Minera S.A. |
Address of manufacturer | San Martin No 499, 00 Iquique Chile |
Location of manufacturing sites | Lagunas mine, 00 Pozo Almonte Chile |
Active substance | Iodine |
Name of manufacturer | ISE Chemicals Corporation |
Address of manufacturer | 3-1, Kyobashi 1-Chome, 104-0031 Tokyo Japan |
Location of manufacturing sites | 3695 Kitaimaizumi, 299-3201 Oamishirasato city Japan |
Active substance | Polyvinylpyrrolidone iodine |
Name of manufacturer | ISP Chemicals LLC, Afiliate of Ashland Inc |
Address of manufacturer | 455 N. main st (HWY 95), KY 42029 Calvert City United States |
Location of manufacturing sites | 455 N. main st (HWY 95), KY 42029 Calvert City United States |
Active substance | Polyvinylpyrrolidone iodine |
Name of manufacturer | Pantheon FZE (DMCC branch) |
Address of manufacturer | 403, Reef Tower, Jumeira Lake Tower Shaikh Zayed Road, 00 Dubai United Arab Emirates |
Location of manufacturing sites | Cala Cala, 00 Pozo Almonte Chile |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,0 | 3,0 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 10,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 0,0 | 21,0 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 30,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 12,5 |
Formulation(s) | SL – Soluble concentrate AL – Any other liquid |
Identifier | metaSPC 1: PT3 Concentrated teat disinfectants Iodine |
Number | 1-1 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 1,5 | 1,5 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 12,05 | 12,05 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | SL – Soluble concentrate |
Hazard statements | Causes serious eye damage. Harmful to aquatic life with long lasting effects. May cause damage to organs (thyroid) through prolonged or repeated exposure (oral). |
Precautionary statements | Wear eye protection. Wear protective clothing. Wear protective gloves. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor or a poison center. Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Post-milking teat disinfection of milk producing animals |
Application method(s) | Manual or automatic spraying on teats |
Application rate(s) and frequency | Dilute the product to a final concentration of 0,3 % (w/w) available iodine. Apply 2 times per day with manual sprayer and 3 times per day with a robot. |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE (High Density Polyethylene) |
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
The product must be diluted before use with clean potable water to allow a final concentration of iodine of 0,3 % (200 ml product, add water up to 1 L).
The diluted product must be brought to a temperature above 20 °C before use.
Assume 5 mL diluted product per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended. Use gloves and eye protection during the dilution step. The diluted product can be kept and used during 1 week but do not prepare more fluid than necessary.
Apply the diluted product on the teats with a manual sprayer or with an automatic sprayer.
The product should be used directly after milking 2 times per day by using a manual sprayer and 3 times per day when using a robot (automatic sprayer).
Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.
For mixing and loading of the product: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) and eye/face protection.
For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
Keep out of reach of children.
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.
If medical advice is needed, have product container or label at hand.
After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.
Have product container or label at hand.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Kenodin SD 400 IodoSD 400 Velvet Concentrate Wynnsan Iodine 3 – 1 conc Iodin Teat Spray 400 | |||||
Authorisation number | EU-0022265-0001 1-1 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 1,5 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 12,05 |
Identifier | metaSPC 2: PT3 – Ready to Use (RTU) Teat disinfectants Iodine |
Number | 1-2 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | 0,3 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,1 | 2,9 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | AL – Any other liquid |
Hazard statements | Harmful to aquatic life with long lasting effects. |
Precautionary statements | Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Post-milking teat disinfection of milk producing animals |
Application method(s) | By dipping or spraying on teats |
Application rate(s) and frequency | The product is ready to use. Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
The product must be brought to a temperature above 20 °C before use.
Apply the product by dipping or by spraying:
By dipping: Apply the product with a dip cup. Wash the dip cup with water after use.
By spraying: Apply the product with a manual sprayer or with an automatic sprayer.
Do not prepare more fluid than necessary; assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.
The product should be used immediately after each milking: 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.
For manual dipping application: No special protection equipment is recommended under normal conditions of use.
For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information.
If a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
Keep out of reach of children.
After eye contact: Rinse immediately with water.
After ingestion: Rinse mouth. Spit.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | IodoDip 3000 Bio Tec Jodip 3000 Recoïode Stalosan Io Dip Stalosan Super Dip Velvet High Visco Bühning Joddip 3000 Kenodin Wynnsan trikill RTU Wynnsan Iodine RTU teat dip Wynnsan Iodine dip RTU Iocid Iodip+ Wynngold Iodine Dip Pezerk iv plus Iod protect 3000 Film Seivit® Iode 3000 Kenostart GAHERYOD Kenodin 3000 Iodin Teat Dip 3000 Iod 3000 dip Iodoschutz dip Ioschutz dip Iodocoop dip Iodotech dip Iodactiv’ dip Iododip MIROX Dip Jod HCP Iodine Dip Agib Jodium Dip Jod 3000 Iod dip Iode 3000 Iodoschutz Coopjod Coopiode Coopiode épais Semex jod Iodotech Iododip green Iodip bio Iododip bio Iodactive épais Iodactiv Iodoactiv’ Bayley’s Premier Iodine Teat Dip Pearce Premier Iodine Teat Dip Diamond 1:3 Concentrate Iodine Post Dip Spray JODOCARE KENOSTART DYP STREPTOFIT Iodall Film | |||||
Authorisation number | EU-0022265-0002 1-2 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,17 |
Trade name(s) | Kenodin Film IodoFilm Wynnsan Iofilm teat dip Kenodin Film Extra Wynngold Film Wynnsan trikill film teat dip Kenodin Film Soft Iocid Film TOP Film Seivit® Iode Gel IOD protect 3000 Film Iodin Film Teat Dip 3000 Iodin Barrier Teat Dip 3000 Iodin Film Teat Dip Iodin Barrier Teat Dip Iod 3000 film Iodoschutz film Ioschutz film Iodocoop film Iodotech film Iodactiv’ film Iodofilm HCP Iodine Film Iod 3000 film Coopjod film Coopiode film Iodocoop film Semex jod film Iodofilm Iodofilm bio Iofilm bio Iodactive film Iodactiv film Iodactiv’ film SCUDO 3000 | |||||
Authorisation number | EU-0022265-0003 1-2 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,9 |
Identifier | metaSPC 3: PT3-RTU Udder disinfectants Iodine |
Number | 1-3 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | 0,99 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,17 | 2,95 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | AL – Any other liquid |
Hazard statements | Harmful to aquatic life with long lasting effects. |
Precautionary statements | Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts |
Field(s) of use | Indoor Skin disinfection only for use on intact skin of:
|
Application method(s) | Spraying |
Application rate(s) and frequency | The product is ready to use. Apply to:
|
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
The product must be brought to a temperature above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
Apply by spraying on the animals’ intact skin for a topical disinfection:
on the udder of dairy and beef cattle before calving: 1 spray on each teat (equivalent to 4,8 mL per application). Disinfection takes place once, one day before calving and once, one day after calving. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing at least 5 minutes).
on the udder of sows before farrowing: Assume 15 to 20 mL per animal, once one day before farrowing and once every day during 4 days after farrowing. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Only for use on intact skin.
Do not mix with other chemicals.
For manual spraying application on cows and sows: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
In case a combination of post-milking disinfection of cows and skin disinfection of cows is necessary, an iodine based product shall not be used by the same person to perform both disinfections.
Keep out of reach of children.
After eye contact: Rinse immediately with water.
After ingestion: Rinse mouth. Spit
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Animal Skin Disinfectant Dermades 3000 Iodin Skin Disinfectant | |||||
Authorisation number | EU-0022265-0004 1-3 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,17 |
Trade name(s) | Dermades Animal skin disinfectant 1 % Dermades Strong Iodin Skin Disinfectant Strong | |||||
Authorisation number | EU-0022265-0005 1-3 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,99 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,95 |
Identifier | metaSPC 4: PT3 – RTU Udder and Teat disinfectants Iodine |
Number | 1-4 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | 0,3 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,17 | 2,17 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | AL – Any other liquid |
Hazard statements | Harmful to aquatic life with long lasting effects. |
Precautionary statements | Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Ready to use teat disinfectant to be used post milking on milk producing animals. |
Application method(s) | Dipping or spraying |
Application rate(s) and frequency | The product is ready to use. Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
The product must be brought to a temperature above 20 °C before use.
By dipping: Apply the product on the teats with a dip cup. Wash the dip cup with water after use.
By spraying: Apply the product on the teats with a manual sprayer or with an automatic sprayer.
Do not prepare more fluid than necessary. Assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.
The product should be used directly after milking by using a dipping cup or a manual or automatic sprayer. Ensure that the teat is completely covered to three quarters of its length.
The product is applied after milking: 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot.
Let the product dry on the teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.
For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
For manual dipping application: no Personal Protection Equipment (PPE) is necessary for safe use.
If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
Keep out of reach of children.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Yeasts Bacteria |
Field(s) of use | Indoor Ready to use skin disinfectant, only for use on intact skin of:
|
Application method(s) | Application on animal skin: by spraying |
Application rate(s) and frequency | The product is ready to use. Apply to:
|
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
The product must be brought to a temperature above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
Apply by spraying on the animals’ intact skin for a topical disinfection:
on the udder of dairy and beef cattle before calving: 1 spray on each teat (equivalent to 4,8 mL per application). Disinfection takes place once, one day before calving and once, one day after calving. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
on the udder of sows before farrowing: Assume 15 to 20 mL per animal, once one day before farrowing and once every day during 4 days after farrowing. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Let the product dry on skin.
Only for use on intact skin.
Do not mix with other chemicals.
For manual spraying application on cows and sows: no PPE is necessary for safe use.
Keep out of reach of children.
See general directions for use.
See general directions for use.
See general directions for use.
See use-specific instructions for use.
See use-specific risk mitigation measures
After eye contact: Rinse immediately with water.
After ingestion: Rinse mouth. Spit.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Kenodin SD IodoSD 3000 Bio Tec Jodspray 3000 Q Farm Iodine Des ANRO – Euterpflege Dip Stalosan Io Spray Stalosan Super Spray IDip+ Bühning Jodspray 3000 Velvet RTU Wynnsan trikill spray Wynnsan Iodine spray RTU Wynngold Iodine Dip and spray Pezerk IL Iod protect 3000 Sprüh Seivit® Iode Spray IOD protect 3000 Sprüh Kenodin SprayFilm Iodo SP Kenostart SD GAHERYOD SPRAY Iodin Teat & Skin 3000 Iod 3000 sprüh Iodoschutz sprüh Ioschutz sprüh Iodocoop sprüh Iodotech sprüh Iodactiv’ sprüh Iodosprüh MIROX Spray Jod HCP Iodine SD Agib Jodium Spray Jod 3000 spray Iod sprüh Coopjod Coopiode spray Iodocoop spray Semex jod spray Iododip spray Iododip spray green Iodospray Bio Iospray bio Iodactive spray Iodactiv spray Iodactiv’ spray Ark Iodine S+D Agrihealth Iodine SD AGRO LOGIC JODOCARE SPRAY IODACTIVE | |||||
Authorisation number | EU-0022265-0006 1-4 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,17 |
Identifier | metaSPC 5: PT3 – RTU Teat disinfectants PVP-Iodine |
Number | 1-5 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,0 | 0,0 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 3,0 | 3,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 1,5 | 2,9 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | AL – Any other liquid |
Hazard statements | Harmful to aquatic life with long lasting effects. |
Precautionary statements | Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Post-milking disinfection on teats of milk producing animals |
Application method(s) | Dipping or spraying |
Application rate(s) and frequency | The product is ready to use. Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
The product must be brought to a temperature above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
Apply the product by dipping or by spraying:
By dipping: Apply the product with a dip cup. Wash the dip cup with water after use.
By spraying: Apply the product with a manual sprayer or with an automatic sprayer.
Do not prepare more fluid than necessary. Assume 5 mL solution per cow per treatment.
The product should be used immediately after each milking, two times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.
For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information.
For manual dipping application: no PPE is necessary for safe use.
If a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
Keep out of reach of children.
After eye contact: Rinse immediately with water.
After ingestion: Rinse mouth. Spit.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 18 months.
Trade name(s) | Iodo PVP Iodin Teat Dip 3000 PVP | |||||
Authorisation number | EU-0022265-0007 1-5 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,0 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 3,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,5 |
Trade name(s) | Iodo SD PVP Iodin Teat Spray & Dip 3000 PVP | |||||
Authorisation number | EU-0022265-0008 1-5 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,0 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 3,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,5 |
Identifier | metaSPC 6: PT3- RTU Udder disinfectants PVP-Iodine |
Number | 1-6 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,0 | 0,0 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 10,0 | 10,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,0 | 2,0 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | AL – Any other liquid |
Hazard statements | Harmful to aquatic life with long lasting effects. May cause damage to organs (thyroid) through prolonged or repeated exposure (oral). |
Precautionary statements | Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Do not breathe spray. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts |
Field(s) of use | Indoor Ready to use skin disinfectant, only for use on intact skin of:
|
Application method(s) | Spraying |
Application rate(s) and frequency | The product is ready to use. Apply to:
|
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
The product must be brought to a temperature above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
Dairy and beef cattle: Apply the product by spraying on the udder before calving (1 spray/teat equivalent to 4,8 mL per application). Disinfection takes place once, one day before calving and once, one day after calving. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Sows, on the udder before farrowing: Assume 15 to 20 mL per animal. Disinfection takes place once, one day before farrowing and once every day during 4 days after farrowing. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Only for use on intact skin.
Do not mix with other chemicals.
For manual spraying application on cows and sows: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
In case a combination of post-milking disinfection of cows and skin disinfection of cows is necessary, an iodine based product shall not be used by the same person to perform both disinfections.
Keep out of reach of children.
See general directions for use.
See general directions for use.
See general directions for use.
See use-specific instructions for use.
See use-specific risk mitigation measures.
After eye contact: Rinse immediately with water.
After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.
Have product container or label at hand.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Dermades PVP Wynngold 10 % Iodine Solution Iodin Skin Disinfectant PVP | |||||
Authorisation number | EU-0022265-0009 1-6 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,0 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 10,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,0 |
Identifier | metaSPC 7: PT3 and PT4 – Concentrated Surface disinfectants Iodine |
Number | 1-7 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) PT04 – Food and feed area (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 1,8 | 2,49 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 3,15 | 9,45 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 2,5 | 12,5 |
Formulation(s) | SL – Soluble concentrate |
Hazard statements | Causes serious eye damage. May cause damage to organs (thyroid) through prolonged or repeated exposure (oral). May be corrosive to metals. Toxic to aquatic life with long lasting effects. |
Precautionary statements | Wear protective gloves. Wear protective clothing. Wear eye protection. Wear face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor or a POISON CENTER. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Collect spillage. Avoid release to the environment. |
Product type | PT04 – Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts |
Field(s) of use | Indoor Non-porous surface disinfection in professional kitchens and in food industry |
Application method(s) | By spraying with a manual or an automatic sprayer |
Application rate(s) and frequency | Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,015 % iodine Frequency is once per day. |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
Use in professional kitchens (PT4) and in food industry (PT4):
The product must be diluted with water before use (according to the table below).
Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.
The product is used in professional kitchens (surface disinfection): Frequency is once per day.
The product is used in food industry (surface disinfection): Frequency is once per day.
Use at room temperature.
Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 15 minutes and rinse the surfaces afterwards with clean water.
a Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 1,8 to 2,49 % it is not possible to indicate all product dilutions here. | ||
Example for a product containing 1 % iodinea | Dilution of the product | Contact time |
Bactericidal and yeasticidal activity | 1,5 % (15 ml product, add water up to 1 L) | 15 min |
Do not mix with other chemicals.
Do not prepare more fluid than necessary.
During pouring and pumping of the concentrated product: Wear chemical resistant gloves (material to be specified by the authorisation holder within the product information) and eye/face protection.
During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) (glove and coverall material to be specified by the authorisation holder within the product information).
Keep out of reach of children.
The general public and animals should be kept away from treated areas until surfaces are dry.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Non-porous surface disinfection in veterinary field |
Application method(s) | By spraying with a manual or an automatic sprayer |
Application rate(s) and frequency | Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,025 % in-use iodine Virucidal activity: 0,035 % in-use iodine |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
Use in veterinary field (PT3), surface disinfection:
The product should be diluted with water before use (according to table below).
Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.
The product is used to disinfect animal housings of pigs, cows and poultry.
Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 30 minutes. Animal housing must be empty of animals during application and animals can re-enter 24h after the end of the application.
a Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 1,8 to 2,49 % it is not possible to indicate all product dilutions here. | ||
Example for a product containing 2,49 % iodinea | Dilution of the product | Contact time |
Bactericidal and yeasticidal activity | 1 % (10ml product, add water up to 1 L) | 30 min |
Virucidal activity | 1,4 % (14ml product, add water up to 1 L) | 30 min |
Do not mix with other chemicals.
Do not prepare more fluid than necessary.
During pouring and pumping of the concentrated product: Wear chemical resistant gloves, coated coverall (material to be specified by the authorisation holder within the product information) and eye/face protection.
During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) which is impermeable for the biocidal product (glove and coverall material to be specified by the authorisation holder within the product information).
Only use one kind of Iodine-containing product per day.
Due to potential concern for human health the same professional user shall not carry out animal house disinfection more than 3 times per month and shll not use Iodine products for other purposes during that period.
Due to potential concern for animal health, disinfection of stables should not be carried out more than once per year or once per lifetime for calves and pigs. Feeding troughs must be covered during application.
Keep out of reach of children.
The general public and animals should be kept away from treated areas until surfaces are dry.
See general directions for use.
See general directions for use.
See general directions for use.
See use-specific instructions for use.
See use-specific risk mitigation measures.
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.
If medical advice is needed, have product container or label at hand.
After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.
Have product container or label at hand.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Dodin 20 Iodo 20 Bio Tec Joddesinfektion Dufa dine 1,8 % Alfasan super disinfectant Iodes Streptoclean Iodin Surface Disinfectant 1,8 % IODINE | |||||
Authorisation number | EU-0022265-0010 1-7 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 1,8 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 5,29 | |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 5,0 |
Identifier | metaSPC 8: PT3 and PT4 – Concentrated Surface disinfectants Iodine |
Number | 1-8 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) PT04 – Food and feed area (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 2,5 | 3,0 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 3,15 | 9,45 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 5,0 | 12,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 2,5 | 12,5 |
Formulation(s) | SL – Soluble concentrate |
Hazard statements | May be corrosive to metals. Causes skin irritation. Causes serious eye damage. May cause damage to organs (thyroid) through prolonged or repeated exposure (oral). Toxic to aquatic life with long lasting effects. |
Precautionary statements | Wear protective gloves. Wear protective clothing. Wear eye protection. Wear face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a a POISON CENTER or doctor/physician. If experiencing respiratory symptoms: Call a a POISON CENTER or doctor/physician. Avoid release to the environment. Collect spillage. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT04 – Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts |
Field(s) of use | Indoor Non-porous surface disinfection in professional kitchens and in food industry |
Application method(s) | By spraying with a manual or an automatic sprayer |
Application rate(s) and frequency | Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,015 % iodine Daily use |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
Use in professional kitchens (PT4) and in food industry (PT4):
The product must be diluted with water before use (according to table below).
Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.
The product is used in professional kitchens (surface disinfection): Frequency is once per day.
The product is used in food industry (surface disinfection): Frequency is once per day.
Use at room temperature.
The product is applied by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 15 minutes, and rinse the surfaces afterwards with clean water.
a Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 2,5 to 3 % it is not possible to indicate all product dilutions here. | ||
Example for a product containing 3 % iodinea | Dilution of the product | Contact time |
Bactericidal and yeasticidal activity | 0,5 % (5 ml product, add water up to 1 L) | 15 min |
Do not mix with other chemicals.
Do not prepare more fluid than necessary.
During pouring and pumping of the concentrated product: Wear chemical resistant gloves, coverall (material to be specified by the authorisation holder within the product information) and eye/face protection.
During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) (glove and coverall material to be specified by the authorisation holder within the product information).
Keep out of reach of children.
The general public and animals should be kept away from treated areas until surfaces are dry.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Non-porous surface disinfection in veterinary field |
Application method(s) | By spraying with a manual or an automatic sprayer |
Application rate(s) and frequency | Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,025 % in-use iodine Virucidal activity: 0,035 % in-use iodine |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
Use in veterinary field (PT3), surface disinfection:
The product must be diluted with water before use (according to table below).
Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.
The product is used to disinfect animal housings of pigs, cows and poultry.
Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 30 minutes. Animal housing must be empty of animals during application and re-entry of animals can be done 24h after the end of the application.
a Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 2,5 to 3 % it is not possible to indicate all product dilutions here. | ||
Example for a product containing 2,5 % iodinea | Dilution of the product | Contact time |
Bactericidal and yeasticidal activity | 1 % (10ml product, add water up to 1 L) | 30 min |
Virucidal activity | 1,4 % (14ml product, add water up to 1 L) | 30 min |
Do not mix with other chemicals.
Do not prepare more fluid than necessary.
During pouring and pumping of the concentrated product: Wear chemical resistant gloves, coverall (material to be specified by the authorisation holder within the product information)and eye/face protection.
During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) which is impermeable for the biocidal product (glove and coverall material to be specified by the authorisation holder within the product information).
Only use one kind of Iodine-containing product per day.
Due to potential concern for human health the same professional user shall not carry out animal house disinfection more than 3 times per month and shall not use Iodine products for other purposes during that period.
Due to potential concern for animal health, disinfection of stables should not be carried out more than once per year or once per lifetime for calves and pigs. Feeding troughs must be covered during application.
Keep out of reach of children.
The general public and animals should be kept away from treated areas until surfaces are dry.
See general directions for use.
See general directions for use.
See general directions for use.
See use-specific instructions for use
See use-specific risk mitigation measures.
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.
If medical advice is needed, have product container or label at hand.
After skin (or hair) contact: Remove contaminated clothing and shoes. Wash the affected area thoroughly with plenty of soap and water. Get medical attention if symptoms occur.
After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.
Have product container or label at hand.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Iocid 30 Iodo 30 Dufa dine Iodin Surface Disinfectant 2,8 % | |||||
Authorisation number | EU-0022265-0011 1-8 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 2,8 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 7,93 | |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 11,25 | |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 12,5 |
Identifier | metaSPC 9: PT4 – Concentrated CIP disinfectants Iodine |
Number | 1-9 |
Product type(s) | PT04 – Food and feed area (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,5 | 0,99 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 0,0 | 0,0 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 25,0 | 30,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | SL – Soluble concentrate |
Hazard statements | Causes severe skin burns and eye damage. Harmful to aquatic life with long lasting effects. May be corrosive to metals. |
Precautionary statements | Wear protective gloves. Wear protective clothing. Wear eye protection. Wear face protection. Avoid release to the environment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. If experiencing respiratory symptoms: Call a doctor. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Immediately call a doctor. |
Product type | PT04 – Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts |
Field(s) of use | Indoor Cleaning in place (CIP) disinfection for milking equipment and CIP installations in food industry |
Application method(s) | CIP disinfection |
Application rate(s) and frequency | Apply the product in the automatic system with an end concentration of 0,00125 % available iodine The product is used once per day in food industry and up to 2 times per day in milking parlours. |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
See general instructions.
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
Disinfection of milking machines or CIP installations in food industry
Clean first the CIP installation.
Apply the product in the automatic system with a dilution of the product (according to table below) with water.
Use at room temperature.
Respect a contact time according to the table below.
Rinse the installation with water.
a Each product label should give information on how the dilution should be made. Since the concentration of iodine in products within this meta SPC can range from 0,5 to 0,99 % it is not possible to indicte all product dilutions here. An example is given for products with 0,5 % iodine. | ||
Example for a product containing 0,5 % iodinea | Dilution of the product | Contact time |
Bactericidal and yeasticidal activity | 0,25 % (2,5 ml product, add water up to 1 L) | 15 min |
Do not mix with other chemicals.
During pouring and pumping of the concentrated product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) (glove and coverall material to be specified by the authorisation holder within the product information) and eye/face protection.
Keep out of reach of children.
After inhalation: Remove person to fresh air and keep comfortable for breathing. Obtain medical attention if breathing difficulty persists.
After skin (or hair) contact: Remove contaminated clothing and shoes. Wash the affected area thoroughly with plenty of soap and water. Get medical attention if symptoms occur.
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.
After ingestion: Rinse mouth. Do NOT induce vomiting and immediately get medical advice.
Have product container or label at hand.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Iodo CIP Iocip Bio Tec Jodreiniger JODOPHOS SUPER 4001 Bühning Jodreiniger Wynnsan Ice bank Tank Cleaner Bulk Tank Sanitizer Iodin CIP Disinfectant | |||||
Authorisation number | EU-0022265-0012 1-9 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,5 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 26,3 |
Identifier | metaSPC 10: PT3 – Concentrated teat disinfectants Iodine |
Number | 1-10 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 2,8 | 2,8 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 21,0 | 21,0 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | SL – Soluble concentrate |
Hazard statements | Causes serious eye damage. Toxic to aquatic life with long lasting effects. May cause damage to organs (thyroid) through prolonged or repeated exposure (oral route). |
Precautionary statements | Wear protective gloves. Wear protective clothing. Wear eye protection. Wear face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor or a poison center. Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Collect spillage. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Post-milking teat disinfection of milk producing animals |
Application method(s) | By spraying with a manual sprayer or with an automatic sprayer on teats. |
Application rate(s) and frequency | The product must be diluted before use in order to allow a final concentration of iodine of 0,3 %. Apply 2 times per day by using a manual sprayer and 3 times per day when using a robot (or automatic sprayer). |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
The product must be diluted before use in order to allow a final concentration of iodine of 0,3 %. The product should be diluted to 11 % (110mL product, add water up to 1 L).
Do not prepare more fluid than necessary. Assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.
Use gloves and eye protection during the dilution step. The diluted product can be kept and used for 1 week.
The product must be brought to a temperature above 20 °C before use.
Apply the diluted product on the teats with a manual sprayer or with an automatic sprayer.
The product should be used directly after milking 2 times per day by using a manual sprayer and 3 times per day by using a robot (automatic sprayer). Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.
For mixing and loading of the product: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) and eye/face protection.
For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) and eye/face protection.
If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
Keep out of reach of children.
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.
If medical advice is needed, have product container or label at hand.
After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.
Have product container or label at hand.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Dilutions of the product(s) are stable for 1 week.
Trade name(s) | Kenodin SD 900 IodoSD 900 IDip+ concentrate Jodkonzentrat 1:9 Bühning Jodkonzentrat 1:9 Wynnsan Iodine Conc dip 9-1 Kenodin 900 Dufa Dip Kenostart 900 Iodin Teat Spray 900 HCP Iodine Concentrate Maxi Subliem CP Subliem Koncentrat Plus | |||||
Authorisation number | EU-0022265-0013 1-10 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 2,8 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 21,0 |
Identifier | metaSPC 11: PT3 – RTU Teat disinfectants Iodine |
Number | 1-11 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,25 | 0,25 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,1 | 2,1 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | AL – Any other liquid |
Hazard statements | Harmful to aquatic life with long lasting effects. |
Precautionary statements | Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts |
Field(s) of use | Indoor Post-milking teat disinfection of milk producing animals |
Application method(s) | By dipping or spraying on teats |
Application rate(s) and frequency | The product is ready to use. Apply 2 times per day when using a manual sprayer and 3 times per day when using a dip cup or a robot (automatic sprayer). |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
See general instructions.
See general instructions.
See general instructions.
See general instructions.
See general instructions.
Apply the product by dipping or by spraying:
By dipping: Apply the product with a dip cup. Wash the dip cup with water after use.
By spraying: Apply the product with a manual sprayer or with an automatic sprayer.
Do not prepare more fluid than necessary; assume 5 mL solution per cow per treatment. The product must be brought to a temperature above 20 °C before use. The use of a dosing pump for filling the product into the application equipment is recommended.
The product should be used immediately after each milking, two times per day when using a manual sprayer or three times per day when using a dip cup or a robot (automatic sprayer). Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.
For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
For manual dipping application: no PPE is necessary for safe use.
If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
Keep out of reach of children.
After eye contact: Rinse immediately with water.
After ingestion: Rinse mouth. Spit.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Kenodin 2500 Iodin Teat Dip 2500 Jod 2500 | |||||
Authorisation number | EU-0022265-0014 1-11 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,25 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,1 |
Identifier | meta SPC 12: PT3 – RTU Teat disinfectants Iodine |
Number | 1-12 |
Product type(s) | PT03 – Veterinary hygiene (Disinfectants) |
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Min | Max | |||||
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 | 0,5 | |
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | 0,0 | ||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,1 | 2,9 |
Phosphoric acid | Phosphoric acid | Non-active Substance | 7664-38-2 | 231-633-2 | 0,0 | 0,0 |
Alcohol C9-11 + 6 EO | Alcohol C9-11 + 6 EO | Non-active Substance | 68439-46-3 | 0,0 | 0,0 |
Formulation(s) | AL – Any other liquid |
Hazard statements | Harmful to aquatic life with long lasting effects. |
Precautionary statements | Avoid release to the environment. Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
Product type | PT03 – Veterinary hygiene (Disinfectants) |
Where relevant, an exact description of the authorised use | — |
Target organism(s) (including development stage) | Bacteria Yeasts Viruses |
Field(s) of use | Indoor Post-milking teat disinfection of milk producing animals |
Application method(s) | By dipping or spraying on teats |
Application rate(s) and frequency | The product is ready to use. Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. |
Category(ies) of users | Professional |
Pack sizes and packaging material | 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 L HDPE |
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
See general directions for use.
The product must be brought to a temperature above 20 °C before use.
Apply the product by dipping or by spraying:
By dipping: Apply the product with a dip cup. Wash the dip cup with water after use
By spraying: Apply the product with a manual sprayer or with an automatic sprayer.
Do not prepare more fluid than necessary; assume 5 mL solution per cow per treatment.
The product should be used immediately after each milking: 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
Do not mix with other chemicals.
For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
For manual dipping application: no PPE is necessary for safe use.
If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
Keep out of reach of children.
After eye contact: Rinse immediately with water.
After ingestion: Rinse mouth. Spit.
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Do not expose to temperatures > 40 °C.
The shelf-life of the products is 2 years.
Trade name(s) | Kenodin 5000 IodoDip 5000 JOD 5000 Bio Tec Jodip 5000 Bühning Jodfilmdip-Super Iocid 5000 Iod protect 5000 Film IOD protect 5000 Film Iocid Iodip+ Protetos cua Iodin Teat Dip 5000 | |||||
Authorisation number | EU-0022265-0015 1-12 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,5 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,9 |
Trade name(s) | Kenodin SD 5000 IodoSD 5000 IODOSPRAY 5000 Bio Tec Jodspray 5000 IDip+ 5000 Bühning Jodspray 5000 Iod protect 5000 Sprüh Kenodin Film Spray IOD protect 5000 Sprüh Iodin Spray & Dip 5000 | |||||
Authorisation number | EU-0022265-0016 1-12 | |||||
Common name | IUPAC name | Function | CAS number | EC number | Content (%) | |
---|---|---|---|---|---|---|
Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,5 | ||
Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 0,0 | |||
Alcohols, C12-15, ethoxylated | Alcohols, C12-15, ethoxylated | Non-active Substance | 68131-39-5 | 500-195-7 | 2,9 |
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 1.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 2.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 3.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 4.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 5.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 6.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 7.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 8.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 9.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 10.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 11.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 12.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: