- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Urban Waste Water Treatment Regulations (Northern Ireland) 2007, PART III.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
(a)1.—(a) The Department shall apply a monitoring method which corresponds at least with the level of requirements described below.
(b)Alternative methods to those mentioned in paragraphs 2, 3 and 4 may be used provided it can be demonstrated that equivalent results are obtained.
Commencement Information
I1Sch. 3 Pt. 3 para. 1 in operation at 1.4.2007, see reg. 1
(a)2.—(a) Flow-proportioned or time-based 24-hour samples shall be collected at the same well-defined point in the outlet and if necessary in the inlet of the treatment plant in order to monitor compliance with the requirements for discharged waste water laid down in these Regulations.
(b)Good international laboratory practices aiming at minimising the degradation of samples between collection and analysis shall be applied.
Commencement Information
I2Sch. 3 Pt. 3 para. 2 in operation at 1.4.2007, see reg. 1
3. The minimum annual number of samples shall be determined according to the size of the treatment plant and be collected at regular intervals during the year:N.I.
—2,000 to 9,999 p.e.: | 12 samples during the first year; 4 samples in subsequent years, if it can be shown that the water during the first year complies with the provisions of these Regulations; if 1 sample of the 4 fails, 12 samples must be taken in the year that follows; |
—10,000 to 49,999 p.e.: | 12 samples; |
—50,000 p.e. or over: | 24 samples. |
Commencement Information
I3Sch. 3 Pt. 3 para. 3 in operation at 1.4.2007, see reg. 1
4. The treated waste water shall be assumed to conform to the relevant parameters if, for each relevant parameter considered individually, samples of the water show that it complies with the relevant parametric value in the following way—N.I.
(a)for the parameters specified in Table 1 and sub-paragraph (b) of regulation 7(7), a maximum number of samples which are allowed to fail the requirements, expressed in concentrations and/or percentage reductions in that Table and that sub-paragraph, is specified in Table 3;
(b)for the parameters of Table 1 expressed in concentrations, the failing samples taken under normal operating conditions must not deviate from the parametric values by more than 100%;
(c)for those parameters specified in Table 2 the annual mean of the samples for each parameter shall conform to the relevant parametric values.
Commencement Information
I4Sch. 3 Pt. 3 para. 4 in operation at 1.4.2007, see reg. 1
5. Extreme values for the water quality in question shall not be taken into consideration when they are the result of unusual situations such as those due to heavy rain.N.I.
Series of samples taken in any year | Maximum permitted number of samples which fail to conform |
---|---|
4-7 | 1 |
8-16 | 2 |
17-28 | 3 |
29-40 | 4 |
41-53 | 5 |
54-67 | 6 |
68-81 | 7 |
82-95 | 8 |
96-110 | 9 |
111-125 | 10 |
126-140 | 11 |
141-155 | 12 |
156-171 | 13 |
172-187 | 14 |
188-203 | 15 |
204-219 | 16 |
220-235 | 17 |
236-251 | 18 |
252-268 | 19 |
269-284 | 20 |
285-300 | 21 |
301-317 | 22 |
318-334 | 23 |
335-350 | 24 |
351-365 | 25 |
Commencement Information
I5Sch. 3 Pt. 3 para. 5 in operation at 1.4.2007, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: