- Latest available (Revised)
- Original (As made)
The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, Section 23 is up to date with all changes known to be in force on or before 09 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
23.—(1) In this regulation—
“pre-exit period” means the period beginning with 3rd July 2001 and ending immediately before IP completion day;
“product” means equipment to which these Regulations apply.
(2) Subject to paragraph (3), where a product was made available on the market during the pre-exit period, despite the amendments made by Schedule 8 of the Product Safety and Metrology etc. (Amendments etc.) (EU Exit) Regulations 2019, any obligation to which a person was subject under these Regulations as they had effect immediately before IP completion day, continues to have effect as it did immediately before IP completion day, in relation to that product.
(3) Paragraph (2) does not apply to any obligation to take action outside of the United Kingdom in respect of that product.
(4) Where, during the pre-exit period—
(a)a product has not been placed on the market; and
(b)a manufacturer has taken any action under regulation 7(2)(b) as it had effect immediately before IP completion day in relation to that product
that action has effect as if it had been done under regulation 7(2)(b) as it has effect on and after IP completion day.]
[F2(5) Subject to paragraph (6), where before 11pm on 31st December 2024—
(a)the product has not been placed on the market or put into service; and
(b)a responsible person has taken any action under the conformity assessment procedure that applies to that product in accordance with Article 14(1) or 14(2) of the Directive
that action has effect as if it had been done under the applicable conformity assessment procedure referred to in regulation 10.
(6) Paragraph (5) does not apply—
(a)after the expiry of the validity of any certificate issued pursuant to the applicable conformity assessment procedure; and
(b)in any event, after 31st December 2027.]
Textual Amendments
F1Reg. 23 inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 14 (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/852, regs. 2(2), 4(2), Sch. 1 para. 1(b)(iii)); 2020 c. 1, Sch. 5 para. 1(1)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: