The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001

2.  The application for a unit verification must be lodged by the manufacturer or his authorised representative F1 ... with [F2 an approved] body chosen by him. E+W+S

This application must include:

• — the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address in addition

• — a written declaration that the same application has not been lodged with any [F3 other approved] body,

• — a technical documentation conforming to the requirements set below:

  • — a description of the equipment

  • — trade name

  • — type, series and numbers

  • — the technical data relevant for the identification of the equipment and the assessment of its noise emission, including, if appropriate, schematic drawings and any description and explanation necessary for their understanding

  • — the reference to [F4 these Regulations].

Extent Information

E1 This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

F1 Words in Sch. 10 para. 2 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 23(b)(i) (with Sch. 8 para. 14) (as amended by S.I. 2019/1246, regs. 1(3), 10(c)(iv) and S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F2 Words in Sch. 10 para. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 23(b)(ii) (with Sch. 8 para. 14) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F3 Words in Sch. 10 para. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 23(b)(iii) (with Sch. 8 para. 14) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F4 Words in Sch. 10 para. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 23(b)(iv) (with Sch. 8 para. 14) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

2.  The application for a unit verification must be lodged by the manufacturer or his authorised representative established in the [F5 European Union] with a notified body chosen by him. N.I.

This application must include:

• — the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address in addition

• — a written declaration that the same application has not been lodged with any other notified body,

• — a technical documentation conforming to the requirements set below:

  • — a description of the equipment

  • — trade name

  • — type, series and numbers

  • — the technical data relevant for the identification of the equipment and the assessment of its noise emission, including, if appropriate, schematic drawings and any description and explanation necessary for their understanding

  • — the reference to this Directive.

Extent Information

E2 This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

F5 Words in Regulations substituted (22.4.2011) by The Treaty of Lisbon (Changes in Terminology) Order 2011 (S.I. 2011/1043), arts. 2-68-10