Search Legislation

The Producer Responsibility Obligations (Packaging Waste) Regulations 2007

Status:

Point in time view as at 01/01/2024.

Changes to legislation:

There are currently no known outstanding effects for the The Producer Responsibility Obligations (Packaging Waste) Regulations 2007, Paragraph 3. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

This section has no associated Explanatory Memorandum

3.—(1) The amount of packaging waste to be [F2recycled] by a producer in relation to a class of producer to which he belongs is calculated as follows—E+W+S

where—

[F3“P” is the amount of packaging and packaging materials handled in Great Britain by the producer in the preceding year, calculated to the nearest tonne by—

(a)

taking into account packaging, including reused transit packaging, or packaging materials, which were imported into the United Kingdom by the producer; and

(b)

excluding—

(i)

reused sales packaging or primary packaging as defined in paragraph 1(a) of Article 3 of the Packaging Waste Directive;

(ii)

production residues from the production of packaging or packaging materials or from any other production process occurring before, during or after the producer handled the packaging or packaging materials;

(iii)

any packaging or packaging materials so supplied which were exported from the United Kingdom by the producer or which to the producer’s reasonable knowledge were otherwise exported from the United Kingdom (except to a marine installation); and

(iv)

reused transit packaging (except reused transit packaging imported into the United Kingdom);]

“C” is the percentage prescribed in paragraph 4 below in relation to the class of producer;

“X” is the percentage prescribed in paragraph 5 below as the [F4recycling] target for the relevant year; and

“Z” is the amount by tonnage of packaging waste which is to be [F5recycled] within the relevant year.

F6(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(3) Where in the preceding year the producer has handled any recyclable material (whether in the form of packaging or packaging materials), the producer shall [F7recycle] an amount of packaging waste consisting of that material calculated as follows—

where—

“M” is the amount in tonnes to the nearest tonne of the recyclable material (whether in the form of packaging or packaging materials) handled in Great Britain by the producer in the preceding year;

“C” is the percentage prescribed in paragraph 4 below in relation to the class of producer;

“Y” is the percentage prescribed in paragraph 6 below as the recycling target for the relevant year; and

“Q” is the amount by tonnage of packaging waste consisting of that material which is to be recycled in the relevant year.

[F8(4) Where in the preceding year the producer has handled any glass (whether in the form of packaging or packaging materials), the producer shall recycle by re-melt an amount of glass packaging waste calculated as follows—

[F9  F10

where—

  • “L” is the amount to the nearest tonne of the glass (whether in the form of packaging or packaging materials) handled in Great Britain by the producer in the preceding year;

  • “B” is the percentage prescribed in paragraph 4 in relation to the class of producer;

  • [F11“Y” is the percentage prescribed in paragraph 6 as the recycling target in respect of glass in relation to the relevant year;]

  • F12...

  • “G” is the amount by tonnage of glass packaging waste which is to be recycled by re-melt in the relevant year.]]

Textual Amendments

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources