- Latest available (Revised)
- Original (As made)
There are multiple versions of this provision on screen. These apply to different geographical extents.
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
There are currently no known outstanding effects for the The Lifts Regulations 2016, Section 50.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
50.—[F2(1) The UK marking must be affixed visibly, legibly, and indelibly—
(a)to the lift carrier;
(b)to the safety component for lifts; or
(c)where paragraph (1A) applies, to—
(i)a label affixed to the lift carrier or the safety component; or
(ii)to a document accompanying the lift or the safety component.]
[F3(1A) For a period of [F4seven years] beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the lift carrier or the safety component; or
(b)to a document accompanying the lift or the safety component.]
(2) Where [F5 paragraph (1A) does not apply and] it is not possible, on account of the nature of a safety component for lifts, to affix the [F6UK ] marking in accordance with paragraph (1), the [F6UK ] marking must be affixed to a label inseparably attached to the safety component for lifts.
(3) The [F7UK] marking [F8 in respect of a ] lift must be followed by the identification number of the [F9approved ] body involved in any of the following conformity assessment procedures—
(a)the final inspection referred to in [F10Schedule 12];
(b)unit verification referred to in [F11 Schedule 15];
(c)quality assurance referred to in [F12Schedules 17, 18 or 19 ].
(4) The [F13 UK ] marking [F14in respect of a safety] component for lifts must be followed by the identification number of the [F9approved ] body involved in any of the following conformity assessment procedures—
(a)product quality assurance referred to in [F15Schedule 13];
(b)full quality assurance referred to in [F16Schedule 14] ;
(c)conformity to type with random checking for safety components for lifts referred to in [F17Schedule 16 ] .
(5) The identification number of the [F9approved ] body must be affixed—
(a)by the notified body itself; or
(b)under the instructions of the [F9approved ] body, by the installer or the installer's authorised representative or by the manufacturer or the manufacturer's authorised representative.
Textual Amendments
F1Word in reg. 50 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(2) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Reg. 50(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(3) (as substituted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(a)); 2020 c. 1, Sch. 5 para. 1(1)
F3Reg. 50(1A) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(3A) (as inserted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in reg. 50(1A) substituted (E.W.S.) (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 3, Sch. 2 (k)
F5Words in reg. 50(2) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(3C) (as inserted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F6Word in reg. 50(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(3B)(a) (as inserted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F7Word in reg. 50(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(3B)(b) (as inserted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F8Words in reg. 50(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(3D) (as inserted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F9Word in reg. 50 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(4) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F10Words in reg. 50(3)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(5)(a) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F11Words in reg. 50(3)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(5)(b) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F12Words in reg. 50(3)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(5)(c) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F13Word in reg. 50(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(3B)(c) (as inserted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F14Words in reg. 50(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(6)(ia) (as inserted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 14(4)(c)); 2020 c. 1, Sch. 5 para. 1(1)
F15Words in reg. 50(4)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(6)(a) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F16Words in reg. 50(4)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(6)(b) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F17Words in reg. 50(4)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 30(6)(c) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
50.—(1) The CE marking must be affixed visibly, legibly and indelibly to the lift carrier or the safety component for lifts.
(2) Where it is not possible, on account of the nature of a safety component for lifts, to affix the CE marking in accordance with paragraph (1), the CE marking must be affixed to a label inseparably attached to the safety component for lifts.
(3) The CE marking on a lift must be followed by the identification number of the notified body involved in any of the following conformity assessment procedures—
(a)the final inspection referred to in Annex V to the Directive (as amended from time to time);
(b)unit verification referred to in Annex VIII to the Directive (as amended from time to time);
(c)quality assurance referred to in Annexes X, XI or XII to the Directive (as amended from time to time).
(4) The CE marking on a safety component for lifts must be followed by the identification number of the notified body involved in any of the following conformity assessment procedures—
(a)product quality assurance referred to in Annex VI to the Directive (as amended from time to time);
(b)full quality assurance referred to in Annex VII to the Directive (as amended from time to time);
(c)conformity to type with random checking for safety components for lifts referred to in Annex IX to the Directive (as amended from time to time).
(5) The identification number of the notified body must be affixed—
(a)by the notified body itself; or
(b)under the instructions of the notified body, by the installer or the installer's authorised representative or by the manufacturer or the manufacturer's authorised representative.
Extent Information
E1This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: