18. In Annex 2—
[F1(1) In Section 1—
(a)for Part B, substitute—
“5. The mark must be legible and indelible, and the characters easily decipherable. It must be clearly displayed for the competent authorities.
6. The mark must indicate the approval number of the establishment. If an establishment manufactures both food to which this Regulation applies and food to which it does not, the food business operator may apply the same identification mark to both types of food.
7. When applied in an establishment located in Great Britain, the mark must be oval in shape and include the abbreviation “UK” or “GB” or the words “United Kingdom”. Products imported into Great Britain from establishments located outside the United Kingdom must not be marked in anyway which indicates or suggests that they were produced in the United Kingdom.
8. When applied in an establishment located in Northern Ireland, the mark must be indicated as ‘UK(NI)’ or ‘United Kingdom (Northern Ireland)’.
9. When applied in an establishment located outside of the United Kingdom the mark must indicate the name of the country in which the establishment is located, which may be written out in full or as shown as a two-letter code in accordance with the relevant ISO standard.”;
(b)in Part C, in paragraph 14, for “Community rules” substitute “ applicable legislation in force in the relevant constituent territory of Great Britain ”.]
(2) In Section 3, in paragraph 3, in point (a), for “Commission Regulation (EC) No 2075/2005”, substitute “ Commission Regulation (EC) No. 2015/1375 ”.
(3) In Section 4, in paragraph 2, for “Directive 2000/13/EC”, substitute “ Regulation (EU) 1169/2011 ”.
Textual Amendments
F1Reg. 18(1) substituted (31.12.2020 immediately before IP completion day) by The Food and Feed Hygiene and Safety (Miscellaneous Amendments etc.) (EU Exit) Regulations 2020 (S.I. 2020/1504), regs. 1(2), 9(10)
Commencement Information
I1Reg. 18 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1