- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Energy Bills Discount Scheme (Northern Ireland) Regulations 2023, Section 23.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
23.—(1) A supplier must treat a relevant supply contract as comprising up to three contracts, as follows—
(a)a single supply contract in respect of all energy supplied or otherwise made available to, or used to make available heating, hot water or electricity to, certified ETII operators (an “ETII supply contract”);
(b)a single supply contract in respect of all energy supplied or otherwise made available to, or used to make available heating or hot water to, certified heat suppliers (a “QHS supply contract”);
(c)a single supply contract in respect of so much (if any) of the energy supplied as is not treated as supplied under the ETII supply contract or the QHS supply contract.
(2) Each supply contract within paragraph (1)(a), (b) or (c) is a “deemed supply contract” for the purposes of this Chapter.
(3) Where under rules made under regulation 11(6)(c) a supply contract is to be treated as comprising more than one supply contract—
(a)paragraph (1) applies separately in relation to each of those supply contracts;
(b)the question which one or more of those supply contracts is to be treated as a relevant supply contract is to be determined in accordance with those rules.
(4) Subject to paragraph (6), the supplier must treat the ETII proportion, applying in respect of the customer, of the supplied energy in any period as the energy supplied in that period under the ETII supply contract.
(5) Subject to paragraph (7), the supplier must treat the QHS proportion, applying in respect of the customer, of the supplied energy in any period as the energy supplied in that period under the QHS supply contract.
(6) Where in accordance with rules the supplier identifies a specified discrepancy in relation to an ETII customer, the supplier must—
(a)if and for so long as the discrepancy has not been resolved in accordance with the rules, treat as the energy supplied under the ETII supply contract a reduced proportion of the supplied energy;
(b)if and to the extent the discrepancy is resolved in accordance with the rules, treat as the energy supplied under the ETII supply contract a revised proportion of the supplied energy.
(7) Where in accordance with rules the supplier identifies a specified discrepancy in relation to a QHS customer, the supplier must—
(a)if and for so long as the discrepancy has not been resolved in accordance with the rules, treat as the energy supplied under the QHS supply contract a reduced proportion of the supplied energy;
(b)if and to the extent the discrepancy is resolved in accordance with the rules, treat as the energy supplied under the QHS supply contract a revised proportion of the supplied energy.
(8) In this regulation—
“discrepancy” means—
in relation to an ETII customer, a discrepancy between—
the information that a supplier holds in relation to the customer, and
information that the Secretary of State holds in relation to a certified ETII operator;
in relation to a QHS customer, a discrepancy between—
the information that a supplier holds in relation to the customer, and
information that the Secretary of State holds in relation to a certified heat supplier;
“reduced proportion” means a proportion, that is less than is provided in paragraph (4) or (5) (and may be zero), prescribed in or determined in accordance with the rules;
“revised proportion” means a proportion, that is not less than the reduced proportion and not greater than is provided in paragraph (4) or (5), prescribed in or determined in accordance with the rules;
“specified discrepancy” means a discrepancy of a kind that the Secretary of State—
considers to provide reasonable grounds to doubt that the result of determining the energy supplied—
under an ETII supply contract, on the basis in paragraph (4), or
under a QHS supply contract, on the basis in paragraph (5),
would be in accordance with the Regulations, and
specifies in rules;
“supplied energy” means the energy supplied under a relevant supply contract in a period.
Commencement Information
I1Reg. 23 in force at 26.4.2023, see reg. 1(1)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: