F1ANNEX IV
PRODUCT FAMILY
GYPSUM BOARD PARTITION KITS (1/2)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, the European Committee for Standardisation (CEN) is requested to specify the following system of attestation of conformity in the relevant harmonised European standards:
Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s) |
|---|---|---|---|
Internal partition kits/systems | For all uses not subject to reaction to fire requirements | any | 3 |
System 3:See Annex III(2)(ii) to Directive 89/106/EEC, second possibility. | |||
The specification for the system must be such that it may be implemented even where it is not necessary to determine the performance for a certain characteristic, because at least one Member State has no legal requirement for that characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if it does not wish to declare the performance of the product in that respect.
Inserted by Commission Implementing Decision of 26 March 2012 amending Decision 98/213/EC on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards internal partition kits (notified under document C(2012) 1866) (Text with EEA relevance) (2012/201/EU).