Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.

ANNEX U.K. Methods for grading pig carcases in the Czech Republic

PART 4 U.K. ULTRA-FOM 300

[F1 3. The lean meat content of the carcase shall be calculated according to the following formula: U.K.

where:

Ŷ

—

the estimated percentage of lean meat in the carcass,

S

—

the thickness of back-fat (including rind) in millimetres, measured at 7 centimetres off the midline of the carcass between the second and third last ribs (measurement known as ‘P ₂ ’),

M

—

the thickness of muscle in millimetres, measured at the same time and in the same place as S.

This formula shall be valid for carcasses weighing between 60 and 120 kilograms.]

Textual Amendments

F1 Substituted by Commission Implementing Decision of 18 April 2013 amending Decision 2005/1/EC authorising methods for grading pig carcasses in the Czech Republic as regards the formulas of the authorised methods and the presentation of such carcasses (notified under document C(2013) 2037) (Only the Czech text is authentic) (2013/187/EU).