Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.
ANNEX IVU.K.WHITE OAK LOG IDENTIFICATION
1.Officials of the official plant protection organisation concerned shall have identified each log as belonging to the white oak group either by visual means, as far as possible, or by carrying out white oak log identification colour tests as specified in 2. This identification colour test shall be performed on at least 10 % of the logs per consignment.U.K.
2.The white oak log identification colour test shall be carried out by means of spraying or painting 10 % sodium nitrite solution to an area of clean superficially dried heartwood at least five centimetres in diameter. Evaluation of the test shall be done within 20 to 60 minutes of application. At temperatures below 2,5 °C, 20 % ethylene glycol can be added to the solution as an antifreeze agent. Samples of logs in which the natural colour initially turns reddish brown becoming black to grey blue in later stages are considered as belonging to the white oak group.U.K.
3.Each log shall be marked ‘WO’, under the supervision of the official plant protection organisation concerned or cooperating State/province officials.U.K.
4.The official phytosanitary certificate required pursuant to Article 13(1)(ii) of Directive 2000/29/EC shall be issued by the official plant protection organisation concerned, and be based on the actions mentioned in 1, 2 and 3. The certificate shall indicate the botanical name of the genus or the species and the number of logs in the consignment. It shall bear the following ‘Additional Declaration’:U.K.
‘It is hereby certified that the logs shipped under this certificate belong solely to species of the white oak group.’