TRANS-EUROPEAN CONVENTIONAL AND HIGH-SPEED RAIL SYSTEM
4. CHARACTERISATION OF THE SUBSYSTEMS
4.2.2. Functional and technical specifications
4.2.3. Functional and technical specifications of the interfaces
7. IMPLEMENTATION OF THE PRM TSI
7.1. Application of this TSI to new Infrastructure/Rolling Stock
7.3. Application of this TSI to existing Infrastructure/Rolling Stock
7.5. Rolling Stock operating under national, bilateral, multilateral or international agreements...
Scope: Whole Subsystems Aspect: Accessibility for Persons with Reduced Mobility
Assessment of Maintenance Arrangements: Conformity Assessment Procedure (Annex F4)
Procedures for assessment of conformity and suitability for use
F.2. Modules for Interoperability Constituents
F.2.2. Module A1: Internal Design Control with Production Verification
3. The technical documentation shall enable the conformity of the interoperability...
5.1. Verification by examination and testing of every product
6. The manufacturer or his authorised representative established within the Community...
7. The manufacturer or his authorised representative shall keep a copy...
F.2.5. Module D: Production Quality Management System
3.1. The manufacturer shall lodge an application for assessment of his...
3.2. The quality management system shall ensure compliance of the interoperability...
3.3. The notified body assesses the quality management system to determine...
3.4. The manufacturer shall undertake to fulfil the obligations arising out...
4.2. The manufacturer shall allow the notified body entrance for inspection...
4.3. The notified body shall periodically carry out audits to make...
5. Each notified body shall communicate to the other notified bodies...
6. The manufacturer shall, for a period of 10 years after...
7. The manufacturer or his authorised representative established within the Community...
8. The manufacturer or his authorised representative established within the Community...
F.2.7. Module H1: Full Quality Management System
3.1. The manufacturer shall lodge an application for assessment of his...
3.2. The quality management system shall ensure compliance of the interoperability...
3.3. The notified body shall assess the quality management system to...
3.4. The manufacturer shall undertake to fulfil the obligations arising out...
4.2. The manufacturer shall allow the notified body entrance for inspection...
4.3. The notified body shall periodically carry out audits to make...
5. The manufacturer shall, for a period of 10 years after...
6. Each notified body shall communicate to the other notified bodies...
7. The manufacturer or its authorised representative established within the Community...
8. The manufacturer or his authorised representative established within the Community...
F.2.8. Module H2: Full Quality Management System With Design Examination
3.1. The manufacturer shall lodge an application for assessment of his...
3.2. The quality management system shall ensure compliance of the interoperability...
3.3. The notified body shall assess the quality management system to...
3.4. The manufacturer shall undertake to fulfil the obligations arising out...
4.2. The manufacturer shall allow the notified body entrance for inspection...
4.3. The notified body shall periodically carry out audits to make...
5. The manufacturer shall, for a period of 10 years after...
7. Each notified body shall communicate to the other notified bodies...
8. The manufacturer or his authorised representative established within the Community...
9. The manufacturer or his authorised representative established within the Community...
F.2.9. Module V: Type-Validation By In Service Experience (Suitability For Use)...
2. The manufacturer, or his authorised representative established within the Community,...
3. The technical documentation shall enable the assessment of the product...
4. The programme for the validation by in service experience shall...
11. The manufacturer or his authorised representative established within the Community...
12. The manufacturer or his authorised representative established within the Community...
F.3. Modules for the EC Verification of Subsystems
F.3.2. Module SD: Production Quality Management System
1. This module describes the EC verification procedure whereby a notified...
2. The notified body carries out the procedure, under the condition,...
3. For the subsystem that is subject of the EC verification...
5.1. The contracting entity, if involved, and the main contractor, when...
5.2. For the contracting entity or the main contractor responsible for...
5.3. The notified body chosen by the contracting entity shall examine,...
5.4. The notified body referenced to in point 5.1. shall assess...
5.5. The contracting entity, if involved, and the main contractor shall...
6.2. The contracting entity, if involved, and the main contractor shall...
6.3. The notified body shall periodically carry out audits to make...
6.5. The notified body chosen by the contracting entity and responsible...
8. The contracting entity, if involved, and the main contractor shall,...
9. Where the subsystem meets the requirements of the TSI, the...
10. The notified body chosen by the contracting entity shall be...
11. Each notified body shall communicate to the other notified bodies...
12. The records accompanying the certificate of conformity shall be lodged...
F.3.3. Module SF: Product Verification
1. This module describes the EC verification procedure whereby a notified...
2. The contracting entity shall lodge an application for EC verification...
3. Within that part of the procedure the contracting entity checks...
5. The application shall enable the design, manufacture, installation, maintenance and...
6. The notified body shall first examine the application concerning the...
8. The notified body shall agree with the contracting entity (and...
9. Where the subsystem meets the requirements of the TSI, the...
10. The notified body shall be responsible for compiling the technical...
11. The records accompanying the certificate of conformity shall be lodged...
F.3.4. Module SG: Unit verification
1. This module describes the EC verification procedure whereby a notified...
2. The contracting entity shall lodge an application for EC verification...
3. The technical documentation shall enable the design, manufacture, installation and...
4. The notified body shall examine the application and the technical...
7. Where the subsystem meets the requirements of the TSI, the...
8. The notified body shall be responsible for compiling the technical...
9. The records accompanying the certificate of conformity shall be lodged...
F.3.5. Module SH2: Full Quality Management System with Design Examination
1. This module describes the EC verification procedure whereby a notified...
2. The notified body shall carry out the procedure, including a...
3. For the subsystem that is subject of the EC verification...
5.1. The contracting entity, if involved, and the main contractor, when...
5.2. For the contracting entity or the main contractor responsible for...
5.3. The notified body chosen by the contracting entity shall examine,...
5.4. The notified body referenced in point 5.1. shall assess the...
5.5. The contracting entity, if involved, and the main contractor shall...
6.2. The contracting entity, if involved, and the main contractor shall...
6.3. The notified body shall periodically carry out audits to make...
6.5. The notified body chosen by the contracting entity and responsible...
8. The contracting entity, if involved, and the main contractor shall,...
9. Where the subsystem meets the requirements of the TSI, the...
10. The notified body chosen by the contracting entity shall be...
11. Each notified body shall communicate to the other notified bodies...
12. The records accompanying the certificate of conformity shall be lodged...
F.4. Assessment of Maintenance Arrangements: Conformity Assessment Procedure