Decision No 768/2008/EC of the European Parliament and of the CouncilShow full title

Chapter R3 U.K. Conformity of the product

Article R8 U.K. Presumption of conformity

Products which are in conformity with harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union shall be presumed to be in conformity with the requirements covered by those standards or parts thereof, set out in … [reference to the relevant part of the legislation].

Article R9 U.K. Formal objection to a harmonised standard

1. When a Member State or the Commission considers that a harmonised standard does not entirely satisfy the requirements which it covers and which are set out in … [reference to the relevant part of the legislation], the Commission or the Member State concerned shall bring the matter before the Committee set up by Article 5 of Directive 98/34/EC, giving its arguments. The Committee shall, having consulted the relevant European standardisation bodies, deliver its opinion without delay.

2. In the light of the Committee's opinion, the Commission shall decide to publish, not to publish, to publish with restriction, to maintain, to maintain with restriction or to withdraw the references to the harmonised standard concerned in or from the Official Journal of the European Union.

3. The Commission shall inform the European standardisation body concerned and, if necessary, request the revision of the harmonised standards concerned.

Article R10 U.K. EC declaration of conformity

1. The EC declaration of conformity shall state that the fulfilment of requirements specified in … [reference to relevant part of the legislation] has been demonstrated.

2. The EC declaration of conformity shall have the model structure set out in Annex III of Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products, shall contain the elements specified in the relevant modules set out in Annex II of that Decision and shall be continuously updated. It shall be translated into the language or languages required by the Member State in which market the product is placed or made available.

3. By drawing up the EC declaration of conformity, the manufacturer shall assume responsibility for the compliance of the product.

Article R11 U.K. General principles of the CE marking

The CE marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.

Article R12 U.K. Rules and conditions for affixing the CE marking

1. The CE marking shall be affixed visibly, legibly and indelibly to the product or to its data plate. Where that is not possible or not warranted on account of the nature of the product, it shall be affixed to the packaging and to the accompanying documents, where the legislation concerned provides for such documents.

2. The CE marking shall be affixed before the product is placed on the market. It may be followed by a pictogram or any other mark indicating a special risk or use.

3. The CE marking shall be followed by the identification number of the notified body, where that body is involved in the production control phase.

The identification number of the notified body shall be affixed by the body itself or, under its instructions, by the manufacturer or his authorised representative.

4. Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and take appropriate action in the event of improper use of the marking. Member States shall also provide for penalties for infringements, which may include criminal sanctions for serious infringements. Those penalties shall be proportionate to the seriousness of the offence and constitute an effective deterrent against improper use.