- Latest available (Revised)
- Original (As adopted by EU)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Decision was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
On receipt of the samples, laboratories shall check the information recorded by the sampler on the sampling form and complete the relevant sections of that form. All samples received shall be examined to ensure that the packaging used for transportation is intact before storing. Samples received at a temperature higher than 8 °C shall be rejected unless the temperature at retail was higher than 8 °C.
Without prejudice to point 1.2, all samples are kept refrigerated until the end of their shelf-life.
In cases where samples must be stored until the end of their shelf-life, they shall be refrigerated:
at the storage temperature indicated on the label of the packaging. If the label indicates a temperature interval, the sample must be stored at the upper limit of the temperature interval;
if there is no specific storage temperature indicated on the label of the packaging, the sample must be kept at:
the maximum refrigeration temperatures defined by the legislation or guidance in force in the Member State where the sample is collected, with a tolerance of ± 2 °C,
8 °C (± 2 °C) where no such legislation or guidance exists.
If the shelf-life of the product sampled ends during a weekend or a national holiday, the sample must be analyzed on the last working day before the end of the shelf-life.
One of the two samples is analyzed within 24 hours from the time of arrival at the laboratory. If that sample is not analysed immediately upon arrival, it must be kept refrigerated at 3 °C (± 2 °C) in the laboratory before analysis.
The second sample shall be kept refrigerated until the end of its shelf-life.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: