| Product benchmark | Definition of products covered | Definition of processes and emissions covered (system boundaries) | Carbon leakage exposure as determined by Decision 2010/2/EU for the years 2013 and 2014 | Benchmark value(allowances/t) |
|---|---|---|---|---|
| Coke | Coke-oven coke (obtained from the carbonisation of coking coal, at high temperature) or gas-works coke (by-product of gas-works plants) expressed as tons of dry coke. Lignite coke is not covered by this benchmark | All processes directly or indirectly linked to the process units coke ovens, H2S/NH3 incineration, coal preheating (defreezing), coke gas extractor, desulphurisation unit, distillation unit, steam generation plant, pressure control in batteries, biological water treatment, miscellaneous heating of by-products and hydrogen separator are included. Coke oven gas cleaning is included | yes | 0,286 |
| Sintered ore | Agglomerated iron-bearing product containing iron ore fines, fluxes and iron-containing recycling materials with the chemical and physical properties such as the level of basicity, mechanical strength and permeability required to deliver iron and necessary flux materials into iron ore reduction processes | All processes directly or indirectly linked to the process units sinter strand, ignition, feedstock preparation units, hot screening unit, sinter cooling unit, cold screening unit and steam generation unit are included | yes | 0,171 |
| Hot metal | Liquid iron saturated with carbon for further processing | All processes directly or indirectly linked to the process units blast furnace, hot metal treatment units, blast furnace blowers, blast furnace hot stoves, basic oxygen furnace, secondary metallurgy units, vacuum ladles, casting units (including cutting), slag treatment unit, burden preparation, BF gas treatment unit, dedusting units, scrap pre-heating, coal drying for PCI, vessels preheating stands, casting ingots preheating stands, compressed air production, dust treatment unit (briquetting), sludge treatment unit (briquetting), steam injection in BF unit, steam generation plant, converter BOF gas cooling and miscellaneous are included | yes | 1,328 |
| Pre-bake anode | Anodes for aluminium electrolysis use consisting of petrol coke, pitch and normally recycled anodes, which are formed to shape specifically intended for a particular smelter and baked in anode baking ovens to a temperature of around 1 150 °C | All processes directly or indirectly linked to the production of pre-bake anodes are included | yes | 0,324 |
| Aluminium | unwrought non-alloy liquid aluminium from electrolysis | All processes directly or indirectly linked to the production step electrolysis are included | yes | 1,514 |
| Grey cement clinker | Grey cement clinker as total clinker produced | All processes directly or indirectly linked to the production of grey cement clinker are included | yes | 0,766 |
| White cement clinker | White cement clinker for use as main binding component in the formulation of materials such as joint filers, ceramic tile adhesives, insulation, and anchorage mortars, industrial floor mortars, ready mixed plaster, repair mortars, and water-tight coatings with maximum average contents of 0,4 mass-% Fe2O3, 0,003 mass-% Cr2O3 and 0,03 mass-% Mn2O3 | All processes directly or indirectly linked to the production of white cement clinker are included | yes | 0,987 |
| Lime | Quicklime: calcium oxide (CaO) produced by the decarbonation of limestone (CaCO3) as ‘standard pure’ lime with a free CaO content of 94,5 %. Lime produced and consumed in the same installation for purification processes is not covered by this product benchmark | All processes directly or indirectly linked to the production of lime are included | yes | 0,954 |
| Dolime | Dolime or calcined dolomite as mixture of calcium and magnesium oxides produced by the decarbonation of dolomite (CaCO3.MgCO3) with a residual CO2 exceeding 0,25 %, a free MgO content between 25 % and 40 % and a bulk density of the commercial product below 3,05 g/cm3. Dolime shall be expressed as ‘standard pure dolime’ quality with a free CaO content of 57,4 % and a free MgO content of 38,0 % | All processes directly or indirectly linked to the production of dolime are included | yes | 1,072 |
| Sintered dolime | Mixture of calcium and magnesium oxides used solely for the production of refractory bricks and other refractory products with a minimum bulk density of 3,05 g/cm3 | All processes directly or indirectly linked to the production of sintered dolime are included | yes | 1,449 |
| Float glass | Float/ground/polish glass (as tons of glass exiting the lehr) | All processes directly or indirectly linked to the production steps melter, refiner, working end, bath and lehr are included | yes | 0,453 |
| Bottles and jars of colourless glass | Bottles of colourless glass of a nominal capacity < 2,5 litres, for beverages and foodstuffs (excluding bottles covered with leather or composition leather; infant’s feeding bottles) except extra-white flint products with an iron oxide content expressed as percent Fe2O3 by weight lower than 0,03 % and colour coordinates of L in the range 100 to 87, of a in the range 0 to – 5 and of b in the range 0 to 3 (using the CIELAB advocated by the Commission internationale d’éclairage) expressed as tons of packed product | All processes directly or indirectly linked to the production steps materials handling, melting, forming, downstream processing, packaging and ancillary processes are included | yes | 0,382 |
| Bottles and jars of coloured glass | Bottles of coloured glass of a nominal capacity < 2,5 litres, for beverages and foodstuffs (excluding bottles covered with leather or composition leather; infant’s feeding bottles) expressed as tons of packed product | All processes directly or indirectly linked to the production steps materials handling, melting, forming, downstream processing, packaging and ancillary processes are included | yes | 0,306 |
| Continuous filament glass fibre products | Melted glass for the production of continuous filament glass fibre products namely chopped strands, rovings, yarns and staple glass fibre and mats (expressed as tons of melted glass exiting the foreheath). Mineral wool products for thermal, acoustic and fire insulation are not included | All processes directly or indirectly linked to the production processes glass melting in the furnaces and glass refining in the foreheaths are included. Downstream processes to convert the fibres into sellable products are not included in this product benchmark | yes | 0,406 |
| Facing bricks | Facing bricks with a density > 1 000 kg/m3 used for masonry based on EN 771-1, excluding pavers, clinker bricks and blue braised facing bricks | All processes directly or indirectly linked to the production processes raw material preparation, component mixing, forming and shaping of ware, drying of ware, firing of ware, product finishing and flue gas cleaning are included | no | 0,139 |
| Pavers | Clay bricks used for flooring according to EN 1344 | All processes directly or indirectly linked to the production processes raw material preparation, component mixing, forming and shaping of ware, drying of ware, firing of ware, product finishing and flue gas cleaning are included | no | 0,192 |
| Roof tiles | Clay roofing tiles as defined in EN 1304:2005 excluding blue braised roof tiles and accessories | All processes directly or indirectly linked to the production processes raw material preparation, component mixing, forming and shaping of ware, drying of ware, firing of ware, product finishing and flue gas cleaning are included | no | 0,144 |
| Spray-dried powder | Spray-dried powder for the production of dry-pressed wall and floor tiles in tonnes of powder produced | All processes directly or indirectly linked to the production of spray-dried powder are included | yes | 0,076 |
| Plaster | Plasters consisting of calcined gypsum or calcium sulphate (including for use in building, for use in dressing woven fabrics or surfacing paper, for use in dentistry, for use in land remediation), in tonnes of stucco. Alpha plaster is not covered by this product benchmark | All processes directly or indirectly linked to the production steps milling, drying and calcining are included | no | 0,048 |
| Dried secondary gypsum | Dried secondary gypsum (synthetic gypsum produced as a recycled by-product of the power industry or recycled material from construction waste and demolition) expressed as tons of product | All processes directly or indirectly linked to the drying of secondary gypsum are included | no | 0,017 |
| Short fibre kraft pulp | Short fibre kraft pulp is a wood pulp produced by the sulphate chemical process using cooking liquor, characterised by fibre lengths of 1-1,5 mm, which is mainly used for products which require specific smoothness and bulk, as tissue and printing paper, expressed as net saleable production in Adt (Air Dried Tonnes) | All processes which are part of the pulp production process (in particular the pulp mill, recovery boiler, pulp drying section and lime kiln and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,12 |
| Long fibre kraft pulp | Long fibre kraft pulp is a wood pulp produced by the sulphate chemical process using cooking liquor, characterised by fibre lengths of 3-3,5 mm, which is mainly used for products for which strength is important, as packaging paper, expressed as net saleable production in Adt (Air Dried Tonnes) | All processes which are part of the pulp production process (in particular the pulp mill, recovery boiler, pulp drying section and lime kiln and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,06 |
| Sulphite pulp, thermo-mechanical and mechanical pulp | Sulphite pulp produced by a specific pulp making process, e.g. pulp produced by cooking wood chips in a pressure vessel in the presence of bisulphite liquor expressed as net saleable production in Adt. Sulphite pulp can be either bleached or unbleached. Mechanical pulp grades: TMP (thermomechanical pulp) and groundwood as net saleable production in Adt. Mechanical pulp can be either bleached or unbleached. Not covered by this group are the smaller subgroups of semichemical pulp CTMP — chemi-thermomechanical pulp and dissolving pulp | All processes which are part of the pulp production process (in particular the pulp mill, recovery boiler, pulp drying section and lime kiln and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,02 |
| Recovered paper pulp | Pulps of fibres derived from recovered (waste and scrap) paper or paperboard or of other fibrous cellulosic material expressed as net saleable production in Adt | All processes which are part of the production of pulp from recovered paper and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,039 |
| Newsprint | Specific paper grade (in rolls or sheets) expressed as net saleable production in Adt used for printing newspapers produced from groundwood and/or mechanical pulp or recycled fibres or any percentage of combinations of these two. Weights usually range from 40 to 52 g/m2 but can be as high as 65 g/m2. Newsprint is machine-finished or slightly calendered, white or slightly coloured and is used in reels for letterpress, offset or flexo-printing | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,298 |
| Uncoated fine paper | Uncoated fine paper, covering both uncoated mechanical and uncoated woodfree expressed as net saleable production in Adt: 1. Uncoated woodfree papers suitable for printing or other graphic purposes made from a variety of mainly virgin fibre furnishes, with variable levels of mineral filler and a range of finishing processes. This grade includes most office papers, such as business forms, copier, computer, stationery and book papers. 2. Uncoated mechanical papers cover the specific paper grades made from mechanical pulp, used for packaging or graphic purposes/magazines | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,318 |
| Coated fine paper | Coated fine paper covering both coated mechanical and coated woodfree papers expressed as net saleable production in Adt: 1. Coated woodfree papers made of fibres produced mainly by a chemical pulping process which are coated in process for different applications and are also known as coated freesheet. This group focuses mainly on publication papers. 2. Coated mechanical papers made from mechanical pulp, used for graphic purposes/magazines. The group is also known as coated groundwood | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,318 |
| Tissue | Tissue papers expressed as net saleable production of parent reel cover a wide range of tissue and other hygienic papers for use in households or commercial and industrial premises such as toilet paper and facial tissues, kitchen towels, hand towels and industrial wipes, the manufacture of baby nappies, sanitary towels, etc. TAD — Through Air Dried Tissue is not part of this group | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. The conversion of parent reel weight to finished products is not part of this product benchmark | yes | 0,334 |
| Testliner and fluting | Testliner and fluting expressed as net saleable production in Adt: 1. Testliner covers types of paperboard that meet specific tests adopted by the packaging industry to qualify for use as the outer facing layer for corrugated board, from which shipping containers are made. Testliner is made primarily from fibres obtained from recycled fibres. 2. Fluting refers to the centre segment of corrugated shipping containers, being faced with linerboard (testliner/kraftliner) on both sides. Fluting covers mainly papers made from recycled fibre but this group also holds paperboard that is made from chemical and semi-chemical pulp | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,248 |
| Uncoated carton board | This benchmark covers a wide range of uncoated products (expressed as net saleable production in Adt) which may be single or multiply. Uncoated carton board is mainly used for packaging applications which the main needed characteristic is strength and stiffness, and for which the commercial aspects as information carrier are of a second order of importance. Carton board is made from virgin and/or recovered fibres, has good folding properties, stiffness and scoring ability. It is mainly used in cartons for consumer products such as frozen food, cosmetics and for liquid containers; also known as solid board, folding box board, boxboard or carrier board or core board | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,237 |
| Coated carton board | This benchmark covers a wide range of coated products (expressed as net saleable production in Adt) which may be single or multiply. Coated carton board is mainly used for commercial applications that need to bring commercial information printed on the packaging to the shelf in the store in applications such as food, pharma, cosmetics, and other. Carton board is made from virgin and/or recovered fibres, and has good folding properties, stiffness and scoring ability. It is mainly used in cartons for consumer products such as frozen food, cosmetics and for liquid containers; also known as solid board, folding box board, boxboard or carrier board or core board | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included | yes | 0,273 |
| Nitric acid | Nitric acid (HNO3), to be recorded in tons HNO3 (100 %) | All processes directly or indirectly linked to the production of the benchmarked product as well as the N2O destruction process are included except the production of ammonia | yes | 0,302 |
| Adipic acid | Adipic acid to be recorded in tons of dry purified adipic acid stored in silos or packed in (big)bags | All processes directly or indirectly linked to the production of the benchmarked product as well as the N2O destruction process are included | yes | 2,79 |
| Vinyl chloride monomer (VCM) | Vinyl chloride (chloroethylene) | All processes directly or indirectly linked to the production steps direct chlorination, oxychlorination and EDC cracking to VCM are included | yes | 0,204 |
| Phenol/acetone | Sum of phenol, acetone and the by-product alpha-methyl styrene as total production | All processes directly or indirectly linked to the production of phenol and acetone are included, in particular air compression, hydroperoxidation, cumene recovery from spent air, concentration and cleavage, production fractionation and purification, tar cracking, acetophenone recovery and purification, AMS recovery for export, AMS hydrogenation for ISB recycle, initial waste water purification (first waste water stripper), cooling water generation (e.g. cooling towers), cooling water utilisation (circulation pumps), flare and incinerators (even if physically located OSB) as well as any support fuel consumption | yes | 0,266 |
| S-PVC | Polyvinyl chloride; not mixed with any other substances consisting of PVC particles with a mean size between 50 and 200 μm | All processes directly or indirectly linked to the production of S-PVC are included except the production of VCM | yes | 0,085 |
| E-PVC | Polyvinyl chloride; not mixed with any other substances consisting of PVC particles with a mean size between 0,1 and 3 μm | All processes directly or indirectly linked to the production of E-PVC are included except the production of VCM | yes | 0,238 |
| Soda ash | Disodium carbonate as total gross production except dense soda ash obtained as by-product in a caprolactam production network | All processes directly or indirectly linked to the process units brine purification, limestone calcination and milk of lime production, absorption of ammonia, precipitation of NaHCO3, filtration or Separation of NaHCO3 crystals from mother liquor, decomposition of NaHCO3 to Na2CO3, recovery of ammonia and densification or production of dense soda ash are included | yes | 0,843 |
If no other reference is given, all product benchmarks refer to 1 ton of product produced expressed as saleable (net) production and to 100 % purity of the substance concerned.
All definitions of processes and emissions covered (system boundaries) include flares where they occur.
The carbon leakage exposure of the benchmarked products is based on Decision 2010/2/EU and is valid for 2013 and 2014. In respect of 2013 and 2014, further sectors might be added to this list by Commission Decision.
| Product benchmark | Definition of products covered | Definition of processes and emissions covered (system boundaries) | Carbon leakage exposure as determined by Decision 2010/2/EU for the years 2013 and 2014 | Benchmark value(allowances/t) |
|---|---|---|---|---|
| Refinery products | Mix of refinery products with more than 40 % light products (motor spirit (gasoline) including aviation spirit, spirit type (gasoline type) jet fuel, other light petroleum oils/light preparations, kerosene including kerosene type jet fuel, gas oils) expressed as CO2 weighted tonne (CWT) | All processes of a refinery matching the definition of one of the CWT process units as well as ancillary non-process facilities operating inside the refinery fence-line such as tankage, blending, effluent treatment, etc. are included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 0,0295 |
| EAF carbon steel | Steel containing less than 8 % metallic alloying elements and tramp elements to such levels limiting the use to those applications where no high surface quality and processability is required | All processes directly or indirectly linked to the process units electric arc furnace, secondary metallurgy, casting and cutting, post-combustion unit, dedusting unit, vessels heating stands, casting ingots preheating stands, scrap drying and scrap preheating are included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 0,283 |
| EAF high alloy steel | Steel containing 8 % or more metallic alloying elements or where high surface quality and processability is required | All processes directly or indirectly linked to the process units electric arc furnace, secondary metallurgy, casting and cutting, post-combustion unit, dedusting unit, vessels heating stands, casting ingots preheating stands, slow cooling pit, scrap drying and scrap preheating are included. The process units FeCr converter and cryogenic storage of industrial gases are not included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 0,352 |
| Iron casting | Casted iron expressed as tons of liquid iron ready alloyed, skinned, and ready for casting | All processes directly or indirectly linked to the process steps melting shop, casting shop, core shop and finishing are included. For the determination of indirect emissions, only the electricity consumption of melting processes within the system boundaries shall be considered | yes | 0,325 |
| Mineral wool | Mineral wool insulation products for thermal, acoustic and fire applications manufactured using glass, rock or slag | All processes directly or indirectly linked to the production steps melting, fibreising and injection of binders, curing and drying and forming are included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | no | 0,682 |
| Plasterboard | The benchmark covers boards, sheets, panels, tiles, similar articles of plaster/compositions based on plaster, (not) faced/reinforced with paper/paperboard only, excluding articles agglomerated with plaster, ornamented (in tonnes of stucco). High-density gypsum fibreboards not covered by this product benchmark | All processes directly or indirectly linked to the production steps milling, drying, calcining and board drying are included. For the determination of indirect emissions, only the electricity consumption of heat pumps applied in the drying stage shall be considered | no | 0,131 |
| Carbon black | Furnace carbon black. Gas- and lamp black products are not covered by this benchmark | All processes directly or indirectly linked to the production of furnace carbon black as well as finishing, packaging and flaring are included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 1,954 |
| Ammonia | Ammonia (NH3), to be recorded in tons produced | All processes directly or indirectly linked to the production of the ammonia and the intermediate product hydrogen are included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 1,619 |
| Steam cracking | Mix of high value chemicals (HVC) expressed as total mass of acetylene, ethylene, propylene, butadiene, benzene and hydrogen excluding HVC from supplemental feed (hydrogen, ethylene, other HVC) with an ethylene content in the total product mix of at least 30 mass-percent and a content of HVC, fuel gas, butenes and liquid hydrocarbons of together at least 50 mass-percent of the total product mix | All processes directly or indirectly linked to the production of high value chemicals as purified product or intermediate product with concentrated content of the respective HVC in the lowest tradable form (raw C4, unhydrogenated pygas) are included except C4 extraction (butadiene plant), C4-hydrogenation, hydrotreating of pyrolysis gasoline and aromatics extraction and logistics/storage for daily operation. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 0,702 |
| Aromatics | Mix of aromatics expressed as CO2 weighted tonne (CWT) | All processes directly or indirectly linked to the aromatics sub-units pygas hydrotreater, benzene/toluene/xylene (BTX) extraction, TDP, HDA, xylene isomerisation, P-xylene units, cumene production and Cyclo-hexane production are included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 0,0295 |
| Styrene | Styrene monomer (vinyl benzene, CAS number: 100-42-5) | All processes directly or indirectly linked to the production of styrene as well as the intermediate product ethylbenzene (with the amount used as feed for the styrene production) are included. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 0,527 |
| Hydrogen | Pure hydrogen and mixtures of hydrogen and carbon monoxide having a hydrogen content ≥ 60 % mole fraction of total contained hydrogen plus carbon monoxide based on the aggregation of all hydrogen- and carbon-monoxide-containing product streams exported from the sub-installation concerned expressed as 100 % hydrogen | All relevant process elements directly or indirectly linked to the production of hydrogen and the separation of hydrogen and carbon monoxide are included. These elements lie between: (a) the point(s) of entry of hydrocarbon feedstock(s) and, if separate, fuel(s); (b) the points of exit of all product streams containing hydrogen and/or carbon monoxide; (c) the point(s) of entry or exit of import or export heat. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 8,85 |
| Synthesis gas | Mixtures of hydrogen and carbon monoxide having a hydrogen content < 60 % mole fraction of total contained hydrogen plus carbon monoxide based on the aggregation of all hydrogen- and carbon-monoxide-containing product streams exported from the sub-installation concerned referred to 47 volume-percent hydrogen | All relevant process elements directly or indirectly linked to the production of syngas and the separation of hydrogen and carbon monoxide are included. These elements lie between: (a) the point(s) of entry of hydrocarbon feedstock(s) and, if separate, fuel(s); (b) the points of exit of all product streams containing hydrogen1 and/or carbon monoxide1; (c) the point(s) of entry or exit of import or export heat. For the determination of indirect emissions, the total electricity consumption within the system boundaries shall be considered | yes | 0,242 |
| Ethylene oxide/ethylene glycols | The ethylene oxide/ethylene glycol benchmark covers the products ethylene oxide (EO, high purity), monoethylene glycol (MEG, standard grade + fibre grade (high purity)), diethylene glycol (DEG), triethylene glycol (TEG). The total amount of products is expressed in terms of EO-equivalents (EOE), which are defined as the amount of EO (in mass) that is embedded in one mass unit of the specific glycol | All processes directly or indirectly linked to the process units EO production, EO purification and glycol section are included. The total electricity consumption (and the related indirect emissions) within the system boundaries is covered by this product benchmark | yes | 0,512 |
If no other reference is given, all product benchmarks refer to 1 ton of product produced expressed as saleable (net) production and to 100 % purity of the substance concerned.
All definitions of processes and emissions covered (system boundaries) include flares where they occur.
The carbon leakage exposure status of the benchmarked products is based on Decision 2010/2/EU and is valid for 2013 and 2014. Further sectors might be added to this list by Commission Decision.
| Benchmark | Benchmark value(allowances/TJ) |
|---|---|
| Heat benchmark | 62,3 |
| Fuel benchmark | 56,1 |